Apparently, LB is not able find the loadbalancer.xml. Could you confirm
that the location provided in obj.conf for the loadbalancer.xml file is
valid - file exists.
Also you mentioned about using auto feature to push / export the
loadbalancer configuration. Is this issue happening after you have
exported the configuration from DAS or even under pure post-installation
setup?.
I would suggest you to do the following -
1. Check that upon a clean webserver instance start-up, post LB
installation; LB is able to initialize successfully. While doing so
ensure that you have the loadbalancer.xml available at location pointed
out by obj.conf entry -
|NameTrans fn="name-trans-passthrough" name="lbplugin"
config-file="<file path for loadbalancer.xml>"
|2. Ensure the process has sufficient right to read/write access for
loadbalancer.xml
3. Export the loadbalancer configuration from DAS (using the "apply
changes now" button on the load balancer export tab). Check that whether
LoadBalancer logs successful reconfiguration message in error.log.
regards
Pankaj
Daniel Cavalcanti wrote:
> Sure...
> Here is the log file section showing the shutdown and restart:
>
> [17/Aug/2007:09:12:49] info (14522): CORE5073: Web server shutdown in
> progress
> [17/Aug/2007:09:12:50] info (14582): CORE1116: Sun Java System Web
> Server 7.0 B12/04/2006 08:17
> [17/Aug/2007:09:12:50] info (14583): reports: Initializing lbplugin
> BuildId: A701212-164111
> [17/Aug/2007:09:12:50] info (14583): CORE5076: Using [Java HotSpot(TM)
> Server VM, Version 1.5.0_12] from [Sun Microsystems Inc.]
> [17/Aug/2007:09:12:50] catastrophe (14583): LBConfigurator.cpp_at_88:
> reports: lb.configurator: CNFG1014 : Error occured while initializing
> Loadbalancer config Parser. Please check that the config file:
> loadbalancer.xml exists and has the read access.
> [17/Aug/2007:09:12:50] failure (14583): lbplugin.cpp_at_238: reports:
> lb.runtime: RNTM3005 : Failed to initialise load balancing subsystem
> [17/Aug/2007:09:12:56] failure (14583): lbplugin.cpp_at_238 : reports:
> lb.runtime: RNTM3005 : Failed to initialise load balancing subsystem
> [17/Aug/2007:09:12:56] failure (14583): lbplugin.cpp_at_238: reports:
> lb.runtime: RNTM3005 : Failed to initialise load balancing subsystem
> [17/Aug/2007:09:12:57] info (14583): HTTP3072: http-listener-1:
> http://tucano.isxinc.com:8080 ready to accept requests
> [17/Aug/2007:09:12:57] info (14583): HTTP3072: http-listener-2:
> https://tucano.isxinc.com:8181 ready to accept requests
> [17/Aug/2007:09:12:57] info (14583): CORE3274: successful server startup
>
> Yes, I'm using GlassFish b58. When you mean setting the DOCTYPE is
> refer to the loadbalancer.xml file right?
> The only problem I see here is that I'm using the automatic push from
> Glassfish to the web server for the loadbalancer.xml.
>
> Let me know if you need anything else.
>
> thanks,
> Daniel.
>
> On 8/17/07, *Pankaj Jairath* <Pankaj.Jairath_at_sun.com
> <mailto:Pankaj.Jairath_at_sun.com>> wrote:
>
> Hello Daniel,
>
> From the log -
> [16/Aug/2007:16:36:37] failure (16596): lbplugin.cpp_at_238: reports:
> lb.runtime: RNTM3005 : Failed to initialise load balancing subsystem
> it appears the Load Balancer has not been successfully initialized.
> Given this, when the request is received; it's the WebServer instance
> that tries to resolve the file and thus logging the error of file
> not found.
>
> Could you stop and start your webserver instance and examine your
> webserver instance errors.log. Upon startup you should see log
> messages
> relating to Load Balancer initialization. Check if any error is
> reported
> in such messages.
>
> Query - Which build are you using. In case you are using b58, ensure
> that the doctype for sun_loadbalancer_1_2.dtd is set to local file
> rather than to sun.com <http://sun.com>.
>
> regards
> Pankaj
> Daniel Cavalcanti wrote:
>
> > Hi...
> > I configured SJSWS 7.0 with GlassFish load-balancer.
> > When I try to access a web service WSDL, the "page" is not found.
> > The error log file for the WS shows this entries:
> >
> > [16/Aug/2007:16:36:37] failure (16596): lbplugin.cpp_at_238: reports:
> > lb.runtime: RNTM3005 : Failed to initialise load balancing subsystem
> > [16/Aug/2007:16:36:37] warning (16596): for host 192.168.100.21
> <http://192.168.100.21>
> > < http://192.168.100.21> trying to GET /collector- 5.1.0/Consumer,
> > send-file reports: HTTP4142: can't find
> > /home/collector/webserver7/https-
> tucano.isxinc.com/docs/collector-5.1.0/Consumer
> <http://tucano.isxinc.com/docs/collector-5.1.0/Consumer>
> > <http://tucano.isxinc.com/docs/collector-5.1.0/Consumer> (File
> not found)
> >
> > The URL I tried to access is
> > http://tucano.isxinc.com:8080/collector-5.1.0/Consumer?WSDL
> >
> > Could some one give me some pointers?
> > thanks,
> > Daniel.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe_at_glassfish.dev.java.net
> <mailto:users-unsubscribe_at_glassfish.dev.java.net>
> For additional commands, e-mail: users-help_at_glassfish.dev.java.net
> <mailto:users-help_at_glassfish.dev.java.net>
>
>