Hi Alexey,
Sorry for cross posting but I posted another question regarding TCP/SOAP in
GlassFish here
http://www.nabble.com/SOAP-TCP-has-been-integrated-to-Glassfish-V3-td25045927.html#a25045927.
After reading Paul's and your blog posts. I realise TCP-SOAP is already
integrated, I can find soap-tcp.jar under the modules. I added a
configuration similiar to the one you posted but Glassfish fails to start.
melshami wrote:
>
> Thanks Alexey, I managed to install the bundle using Flex shell, I think
> in the current build there is no need to add other paths to
> felix.auto.start.1, now I will need to test the custom filter:)
>
> The exception is similiar to the previous one but I don't think it's
> ClassDefNotFound exception.
>
> java.lang.NullPointerException
> at
> com.sun.grizzly.config.GrizzlyServiceListener.initializeListener(GrizzlyServiceListener.java:83)
> at
> com.sun.grizzly.config.GrizzlyServiceListener.configure(GrizzlyServiceListener.java:77)
> at
> com.sun.enterprise.v3.services.impl.GrizzlyListener.configure(GrizzlyListener.java:59)
> at
> com.sun.enterprise.v3.services.impl.GrizzlyProxy.configureGrizzly(GrizzlyProxy.java:125)
> at
> com.sun.enterprise.v3.services.impl.GrizzlyProxy.<init>(GrizzlyProxy.java:116)
>
> BR,
> Mohamed
>
> Oleksiy Stashok wrote:
>>
>> Hello again :)
>>
>>> I see the changes is with network listener protocol attribute value
>>> for the
>>> http and admin listeners. I tested all possible alternatives before
>>> bothering you with one more question:).
>> Just to check, do you see any exceptions in a log?
>>
>>
>>> btw I am using glassfish-v3-b66-windows version. Could it be the a
>>> problem
>>> with this build?
>> It should be fine, I believe.
>>
>>> I have attached TCPProtcol.jar in case if you wanted to test it
>>> yourself,
>>> but I doubt it even reached the pointer where the classes were loaded
>>> http://www.nabble.com/file/p25767056/TCPProtocol.jar TCPProtocol.jar
>> Ok, how do you include jar above to a GF? :) IMO this is the issue.
>>
>> AFAIK you have to create osgi module from your jar and install it to
>> GFv3.
>>
>> 1) How to create osgi module?
>> Here I'm not big expert. You can take a look on internet, or check
>> grizzly project's maven scripts to see how you can make osgi module.
>> What I did with the jar you sent - is unpacked it and changed
>> MANIFEST.MF file, so it looks like [1] and then repackaged jar file
>> again.
>>
>> 2) Install osgi module to GFv3
>> Not sure, may be it could be done easier way, but here are steps I did.
>>
>> 2.1) Enabled Felix shell for GFv3
>> You can take a look here [2], but note that paths there are incorrect.
>> Here are correct paths [3]
>>
>> 2.2) Install osgi module
>> Please look at [4], starting from step 5, but run glassfish using
>> (suppose you're in glassfishv3/bin folder)
>> java -Xmx512m -jar ../glassfish/modules/glassfish.jar
>>
>> 2.3) Done
>> After installing osgi module, restart GFv3 - it should work.
>> Seems it works for me.
>>
>> Thanks.
>>
>> WBR,
>> Alexey.
>>
>>
>> [1]
>> Manifest-Version: 1.0
>> Ant-Version: Apache Ant 1.7.1
>> Created-By: 14.0-b16 (Sun Microsystems Inc.)
>> X-COMMENT: Main-Class will be added automatically by build
>> Export-Package: scedev.grizzly.protocols
>> implementation-version: 0.1
>> package: scedev.grizzly.protocols
>> Bundle-Name: scedev-grizzly
>> Bundle-Vendor: scedev
>> Bundle-Version: 0.1
>> Bnd-LastModified: 1254747835722
>> Bundle-ManifestVersion: 2
>> Bundle-SymbolicName: scedev.grizzly.protocols
>> Import-Package:
>> com
>> .sun
>> .grizzly
>> ,com
>> .sun
>> .grizzly
>> .filter
>> ,com
>> .sun
>> .grizzly
>> .http
>> ,com
>> .sun.grizzly.http.portunif,com.sun.grizzly.portunif,com.sun.grizzly.util
>>
>> [2] http://blogs.sun.com/arungupta/entry/totd_34_using_felix_shell
>>
>> [3] felix.auto.start.1= \
>> reference:${com.sun.aas.installRootURI}modules/osgi-main.jar\
>> ${com.sun.aas.installRootURI}modules/org.apache.felix.shell.jar \
>> ${com.sun.aas.installRootURI}modules/org.apache.felix.shell.tui.jar
>>
>> [4] http://blogs.sun.com/arungupta/entry/totd_36_deploy_osgi_bundles
>>
>>
>>>
>>> Oleksiy Stashok wrote:
>>>>
>>>> Hi Mohamed,
>>>>
>>>> my fault, please try following config:
>>>>
>>>> <network-config>
>>>> <protocols>
>>>> <protocol name="pu-protocol">
>>>> <port-unification>
>>>> <protocol-finder protocol="http"
>>>> classname="com.sun.grizzly.http.portunif.HttpProtocolFinder"
>>>> name="http-finder" />
>>>> <protocol-finder protocol="rpc"
>>>> classname="scedev.grizzly.protocols.TCPProtocolFinder" name="rpc-
>>>> protocol-finder" />
>>>> </port-unification>
>>>> </protocol>
>>>> <protocol name="http">
>>>> <http max-connections="250" default-virtual-
>>>> server="server" server-name="" />
>>>> </protocol>
>>>> <protocol name="rpc">
>>>> <protocol-chain-instance-handler>
>>>> <protocol-chain>
>>>> <protocol-filter
>>>> classname="scedev.grizzly.protocols.TCPProtocolFilter" name="rpc-
>>>> filter" />
>>>> </protocol-chain>
>>>> </protocol-chain-instance-handler>
>>>> </protocol>
>>>> <protocol name="http-listener-1">
>>>> <http max-connections="250" default-virtual-
>>>> server="server" server-name="">
>>>> <file-cache enabled="false" />
>>>> </http>
>>>> </protocol>
>>>> <protocol security-enabled="true" name="http-listener-2">
>>>> <http max-connections="250" default-virtual-
>>>> server="server" server-name="">
>>>> <file-cache enabled="false" />
>>>> </http>
>>>> <ssl ssl3-enabled="false" cert-nickname="s1as" />
>>>> </protocol>
>>>> <protocol name="admin-listener">
>>>> <http max-connections="250" default-virtual-
>>>> server="__asadmin" server-name="">
>>>> <file-cache enabled="false" />
>>>> </http>
>>>> </protocol>
>>>> </protocols>
>>>> <network-listeners>
>>>> <network-listener port="8787" protocol="pu-protocol"
>>>> transport="tcp" name="tcprpc-listener" thread-pool="thread-pool-1" />
>>>> <network-listener port="8080" protocol="http-listener-1"
>>>> transport="tcp" name="http-listener-1" thread-pool="http-thread-
>>>> pool" />
>>>> <network-listener port="4848" protocol="admin-listener"
>>>> transport="tcp" name="admin-listener" thread-pool="thread-pool-1" />
>>>> </network-listeners>
>>>> <transports>
>>>> <transport name="tcp" />
>>>> </transports>
>>>> </network-config>
>>>>
>>>> WBR,
>>>> Alexey.
>>>>
>>>> On Oct 6, 2009, at 12:53 , melshami wrote:
>>>>
>>>>>
>>>>> Hi Alexey,
>>>>>
>>>>> Thanks for bearing with me, still no luck. I tried your suggestion
>>>>> and I
>>>>> tried different variations of configuration protocol element.
>>>>>
>>>>> here is my current configuration:
>>>>> <network-config>
>>>>> <protocols>
>>>>> <protocol name="pu-protocol">
>>>>> <port-unification>
>>>>> <protocol-finder protocol="http"
>>>>> classname="com.sun.grizzly.http.portunif.HttpProtocolFinder"
>>>>> name="http-finder" />
>>>>> <protocol-finder protocol="rpc"
>>>>> classname="scedev.grizzly.protocols.TCPProtocolFinder"
>>>>> name="rpc-protocol-finder" />
>>>>> </port-unification>
>>>>> </protocol>
>>>>> <protocol name="http" />
>>>>> <protocol name="rpc">
>>>>> <protocol-chain-instance-handler>
>>>>> <protocol-chain>
>>>>> <protocol-filter
>>>>> classname="scedev.grizzly.protocols.TCPProtocolFilter" name="rpc-
>>>>> filter" />
>>>>> </protocol-chain>
>>>>> </protocol-chain-instance-handler>
>>>>> </protocol>
>>>>> <protocol name="http-listener-1">
>>>>> <http max-connections="250" default-virtual-
>>>>> server="server"
>>>>> server-name="">
>>>>> <file-cache enabled="false" />
>>>>> </http>
>>>>> </protocol>
>>>>> <protocol security-enabled="true" name="http-listener-2">
>>>>> <http max-connections="250" default-virtual-
>>>>> server="server"
>>>>> server-name="">
>>>>> <file-cache enabled="false" />
>>>>> </http>
>>>>> <ssl ssl3-enabled="false" cert-nickname="s1as" />
>>>>> </protocol>
>>>>> <protocol name="admin-listener">
>>>>> <http max-connections="250" default-virtual-
>>>>> server="__asadmin"
>>>>> server-name="">
>>>>> <file-cache enabled="false" />
>>>>> </http>
>>>>> </protocol>
>>>>> </protocols>
>>>>> <network-listeners>
>>>>> <network-listener port="8787" protocol="pu-protocol"
>>>>> transport="tcp" name="tcprpc-listener" thread-pool="thread-
>>>>> pool-1" />
>>>>> <network-listener port="8080" protocol="pu-protocol"
>>>>> transport="tcp" name="http-listener-1" thread-pool="http-thread-
>>>>> pool" />
>>>>> <network-listener port="4848" protocol="pu-protocol"
>>>>> transport="tcp" name="admin-listener" thread-pool="thread-pool-1" />
>>>>> </network-listeners>
>>>>> <transports>
>>>>> <transport name="tcp" />
>>>>> </transports>
>>>>> </network-config>
>>>>>
>>>>> Oleksiy Stashok wrote:
>>>>>>
>>>>>> Hi Mohamed,
>>>>>>
>>>>>> hmm, this is a bug - I'll fix it for coming GF release.
>>>>>> Meanwhile you can workaround this issue by declaring http protocol,
>>>>>> within the port unification declaration, together with rpc
>>>>>> protocol,
>>>>>> like:
>>>>>>
>>>>>> <protocol name="pu-protocol">
>>>>>> <port-unification>
>>>>>> <protocol-finder name="http-finder"
>>>>>> classname="com.sun.grizzly.http.portunif.HttpProtocolFinder"
>>>>>> protocol="http"/>
>>>>>> <protocol-finder name="rpc-protocol-finder"
>>>>>> classname="scedev.grizzly.protocols.TCPProtocolFinder"
>>>>>> protocol="rpc"/>
>>>>>> </port-unification>
>>>>>> </protocol>
>>>>>>
>>>>>> <protocol name="http">
>>>>>> </protocol>
>>>>>>
>>>>>>
>>>>>> WBR,
>>>>>> Alexey.
>>>>>>
>>>>>> On Oct 6, 2009, at 10:55 , melshami wrote:
>>>>>>
>>>>>>>
>>>>>>> Hi Alexey,
>>>>>>>
>>>>>>> I Can't seem to get this right, here is my configuration:
>>>>>>>
>>>>>>> <network-config>
>>>>>>> <protocols>
>>>>>>> <protocol name="pu-protocol">
>>>>>>> <port-unification>
>>>>>>> <protocol-finder protocol="rpc" name="rpc-protocol-
>>>>>>> finder"
>>>>>>> classname="scedev.grizzly.protocols.TCPProtocolFinder" />
>>>>>>> </port-unification>
>>>>>>> </protocol>
>>>>>>> <protocol name="rpc">
>>>>>>> <protocol-chain-instance-handler>
>>>>>>> <protocol-chain>
>>>>>>> <protocol-filter name="rpc"
>>>>>>> classname="scedev.grizzly.protocols.TCPProtocolFilter" />
>>>>>>> </protocol-chain>
>>>>>>> </protocol-chain-instance-handler>
>>>>>>> </protocol>
>>>>>>> <protocol name="http-listener-1">
>>>>>>> <http default-virtual-server="server" max-
>>>>>>> connections="250"
>>>>>>> server-name="">
>>>>>>> <file-cache enabled="false" />
>>>>>>> </http>
>>>>>>> </protocol>
>>>>>>> <protocol security-enabled="true" name="http-listener-2">
>>>>>>> <http default-virtual-server="server" max-
>>>>>>> connections="250"
>>>>>>> server-name="">
>>>>>>> <file-cache enabled="false" />
>>>>>>> </http>
>>>>>>> <ssl ssl3-enabled="false" cert-nickname="s1as" />
>>>>>>> </protocol>
>>>>>>> <protocol name="admin-listener">
>>>>>>> <http default-virtual-server="__asadmin" max-
>>>>>>> connections="250"
>>>>>>> server-name="">
>>>>>>> <file-cache enabled="false" />
>>>>>>> </http>
>>>>>>> </protocol>
>>>>>>> </protocols>
>>>>>>> <network-listeners>
>>>>>>> <network-listener port="8787" protocol="pu-protocol"
>>>>>>> transport="tcp" name="tcprpc-listener" thread-pool="http-thread-
>>>>>>> pool" />
>>>>>>> <network-listener port="8080" protocol="http-listener-1"
>>>>>>> transport="tcp" name="http-listener-1" thread-pool="http-thread-
>>>>>>> pool" />
>>>>>>> <network-listener port="8181" protocol="http-listener-2"
>>>>>>> transport="tcp" name="http-listener-2" thread-pool="http-thread-
>>>>>>> pool" />
>>>>>>> <network-listener port="4848" protocol="admin-listener"
>>>>>>> transport="tcp" name="admin-listener" thread-pool="http-thread-
>>>>>>> pool" />
>>>>>>> </network-listeners>
>>>>>>> <transports>
>>>>>>> <transport name="tcp" />
>>>>>>> </transports>
>>>>>>> </network-config>
>>>>>>>
>>>>>>> GlassFish won't start due to this exception:
>>>>>>>
>>>>>>> #|2009-10-06T09:48:46.654+0100|SEVERE|glassfish|null|
>>>>>>> _ThreadID=11;_ThreadName=Thread-3;|Unable
>>>>>>> to start v3. Closing all ports
>>>>>>> java.lang.NullPointerException
>>>>>>> at
>>>>>>> com
>>>>>>> .sun
>>>>>>> .grizzly
>>>>>>> .config
>>>>>>> .GrizzlyServiceListener
>>>>>>> .initializeListener(GrizzlyServiceListener.java:83)
>>>>>>> at
>>>>>>> com
>>>>>>> .sun
>>>>>>> .grizzly
>>>>>>> .config
>>>>>>> .GrizzlyServiceListener.configure(GrizzlyServiceListener.java:
>>>>>>> 77)
>>>>>>> at
>>>>>>> com
>>>>>>> .sun
>>>>>>> .enterprise
>>>>>>> .v3.services.impl.GrizzlyListener.configure(GrizzlyListener.java:
>>>>>>> 59)
>>>>>>> at
>>>>>>> com
>>>>>>> .sun
>>>>>>> .enterprise
>>>>>>> .v3.services.impl.GrizzlyProxy.configureGrizzly(GrizzlyProxy.java:
>>>>>>> 125)
>>>>>>> at
>>>>>>> com
>>>>>>> .sun
>>>>>>> .enterprise
>>>>>>> .v3.services.impl.GrizzlyProxy.<init>(GrizzlyProxy.java:
>>>>>>> 116)
>>>>>>> at
>>>>>>> com
>>>>>>> .sun
>>>>>>> .enterprise
>>>>>>> .v3
>>>>>>> .services
>>>>>>> .impl.GrizzlyService.createNetworkProxy(GrizzlyService.java:
>>>>>>> 344)
>>>>>>> at
>>>>>>> com
>>>>>>> .sun
>>>>>>> .enterprise
>>>>>>> .v3
>>>>>>> .services.impl.GrizzlyService.postConstruct(GrizzlyService.java:
>>>>>>> 266)
>>>>>>> at
>>>>>>> com
>>>>>>> .sun.hk2.component.AbstractWombImpl.inject(AbstractWombImpl.java:
>>>>>>> 174)
>>>>>>> at com.sun.hk2.component.ConstructorWomb
>>>>>>> $1.run(ConstructorWomb.java:
>>>>>>> 91)
>>>>>>> at java.security.AccessController.doPrivileged(Native Method)
>>>>>>>
>>>>>>> I have set the classpath for the custom protocol filter and finder
>>>>>>> in the
>>>>>>> JVM classpath settings.
>>>>>>>
>>>>>>> Is there anything else I am missing?
>>>>>>>
>>>>>>> Regards,
>>>>>>> Mohamed
>>>>>>>
>>>>>>> melshami wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>> It's not a problem at all, am still testing we have enough time
>>>>>>>> before
>>>>>>>> production so I hope there will be a new release soon. I will try
>>>>>>>> that and
>>>>>>>> will get back to you.
>>>>>>>>
>>>>>>>> Thanks for your help:)
>>>>>>>>
>>>>>>>>
>>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>>
>>>>>>>>>> I think since I am using glassfish-prelude v3 it still uses v2
>>>>>>>>>> configuraiton
>>>>>>>>>> scheme, if I am correct it's sun-domain_1_3.dtd which has all
>>>>>>>>>> network
>>>>>>>>>> configuration under the <http-service> element. So I am not
>>>>>>>>>> sure
>>>>>>>>>> where to
>>>>>>>>>> set the protocol-finder name under this scheme.
>>>>>>>>> I think there is no way to use port unification with prelude :(
>>>>>>>>> Will it be a problem for you to use latest promoted GFv3 [1]?
>>>>>>>>>
>>>>>>>>> Thanks.
>>>>>>>>>
>>>>>>>>> WBR,
>>>>>>>>> Alexey.
>>>>>>>>>
>>>>>>>>> [1] http://download.java.net/glassfish/v3/promoted/
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Thanks,
>>>>>>>>>> Mohamed
>>>>>>>>>>
>>>>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>>>>
>>>>>>>>>>> Hi,
>>>>>>>>>>>
>>>>>>>>>>> you can take a look at config module in grizzly workspace [1].
>>>>>>>>>>> There you can find unit tests with different configurations
>>>>>>>>>>> like
>>>>>>>>>>> [2],
>>>>>>>>>>> which actually has port unification enabled, but you can
>>>>>>>>>>> redefine
>>>>>>>>>>> config to use X-protocol directly without port unification.
>>>>>>>>>>>
>>>>>>>>>>> WBR,
>>>>>>>>>>> Alexey.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> [1] svn checkout
>>>>>>>>>>> https://www.dev.java.net/svn/grizzly/trunk/code/modules/config
>>>>>>>>>>> [2]
>>>>>>>>>>> <network-config>
>>>>>>>>>>> <transports>
>>>>>>>>>>> <transport name="tcp"/>
>>>>>>>>>>> </transports>
>>>>>>>>>>> <protocols>
>>>>>>>>>>> <protocol name="pu-protocol">
>>>>>>>>>>> <port-unification>
>>>>>>>>>>> <protocol-finder name="http-finder"
>>>>>>>>>>> classname="com.sun.grizzly.http.portunif.HttpProtocolFinder"
>>>>>>>>>>> protocol="http"/>
>>>>>>>>>>> <protocol-finder name="X-protocol-finder"
>>>>>>>>>>> classname="com.sun.grizzly.config.XProtocolFinder"
>>>>>>>>>>> protocol="X-
>>>>>>>>>>> protocol"/>
>>>>>>>>>>> </port-unification>
>>>>>>>>>>> </protocol>
>>>>>>>>>>>
>>>>>>>>>>> <protocol name="http">
>>>>>>>>>>> <http enable-comet-support="true"/>
>>>>>>>>>>> </protocol>
>>>>>>>>>>>
>>>>>>>>>>> <protocol name="X-protocol">
>>>>>>>>>>> <protocol-chain-instance-handler>
>>>>>>>>>>> <protocol-chain>
>>>>>>>>>>> <protocol-filter name="x-filter"
>>>>>>>>>>> classname="com.sun.grizzly.config.XProtocolFilter"/>
>>>>>>>>>>> </protocol-chain>
>>>>>>>>>>> </protocol-chain-instance-handler>
>>>>>>>>>>> </protocol>
>>>>>>>>>>>
>>>>>>>>>>> </protocols>
>>>>>>>>>>> <network-listeners>
>>>>>>>>>>> <thread-pool name="defaultThreadPool"/>
>>>>>>>>>>> <network-listener name="http-listener" port="38082"
>>>>>>>>>>> transport="tcp" protocol="pu-protocol" thread-
>>>>>>>>>>> pool="defaultThreadPool"/>
>>>>>>>>>>> </network-listeners>
>>>>>>>>>>> </network-config>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Oct 5, 2009, at 15:14 , melshami wrote:
>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Hi Alexey,
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks very much for the prompt reply. I am a bit confused to
>>>>>>>>>>>> be
>>>>>>>>>>>> honest
>>>>>>>>>>>> since I am new to Grizzly. But I wish to configure a listener
>>>>>>>>>>>> which
>>>>>>>>>>>> listens
>>>>>>>>>>>> to custom TCP based protocol. As a starting point I am trying
>>>>>>>>>>>> to
>>>>>>>>>>>> configure a
>>>>>>>>>>>> simple echo server which replies to socket connections on
>>>>>>>>>>>> GlassFish
>>>>>>>>>>>> v3.
>>>>>>>>>>>>
>>>>>>>>>>>> Regards,
>>>>>>>>>>>> Mohamed
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> Hi Mohamed,
>>>>>>>>>>>>>
>>>>>>>>>>>>>> I can't seem to find any documentation for how to configure
>>>>>>>>>>>>>> grizlly
>>>>>>>>>>>>>> listeners and connectors on GlassFish v3.
>>>>>>>>>>>>> Currently doc team is working on that.
>>>>>>>>>>>>>
>>>>>>>>>>>>>> So far I can find only this page
>>>>>>>>>>>>>> http://wiki.glassfish.java.net/Wiki.jsp?
>>>>>>>>>>>>>> page=GrizzlyConfigOnePager,
>>>>>>>>>>>>>> which
>>>>>>>>>>>>>> refers to a new scheme and it's not complete yet.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Anyone can help with this please?
>>>>>>>>>>>>> Do you have any specific item in mind you'd like to
>>>>>>>>>>>>> configure?
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks.
>>>>>>>>>>>>>
>>>>>>>>>>>>> WBR,
>>>>>>>>>>>>> Alexey.
>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> BR,
>>>>>>>>>>>>>> Mohamed
>>>>>>>>>>>>>> --
>>>>>>>>>>>>>> View this message in context:
>>>>>>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25750048.html
>>>>>>>>>>>>>> Sent from the Grizzly - Users mailing list archive at
>>>>>>>>>>>>>> Nabble.com.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>>> To unsubscribe, e-mail: users-
>>>>>>>>>>>>>> unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>>> For additional commands, e-mail: users-
>>>>>>>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>> For additional commands, e-mail:
>>>>>>>>>>>>> users-help_at_grizzly.dev.java.net
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> View this message in context:
>>>>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25750628.html
>>>>>>>>>>>> Sent from the Grizzly - Users mailing list archive at
>>>>>>>>>>>> Nabble.com.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>> To unsubscribe, e-mail: users-
>>>>>>>>>>>> unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>> For additional commands, e-mail: users-
>>>>>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> View this message in context:
>>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25752899.html
>>>>>>>>>> Sent from the Grizzly - Users mailing list archive at
>>>>>>>>>> Nabble.com.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>> For additional commands, e-mail: users-
>>>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> View this message in context:
>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25765021.html
>>>>>>> Sent from the Grizzly - Users mailing list archive at Nabble.com.
>>>>>>>
>>>>>>>
>>>>>>> ---------------------------------------------------------------------
>>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>>>>
>>>>>>
>>>>>>
>>>>>> ---------------------------------------------------------------------
>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>> --
>>>>> View this message in context:
>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25766557.html
>>>>> Sent from the Grizzly - Users mailing list archive at Nabble.com.
>>>>>
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>>
>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>
>>>>
>>>>
>>>
>>> --
>>> View this message in context:
>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25767056.html
>>> Sent from the Grizzly - Users mailing list archive at Nabble.com.
>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>
>>
>>
>
>
--
View this message in context: http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25802994.html
Sent from the Grizzly - Users mailing list archive at Nabble.com.