Hi Mohamed,
> Sorry for cross posting but I posted another question regarding TCP/
> SOAP in
> GlassFish here
> http://www.nabble.com/SOAP-TCP-has-been-integrated-to-Glassfish-V3-td25045927.html#a25045927
> .
Oh, it's difficult to follow all the forums :)
>
> After reading Paul's and your blog posts. I realise TCP-SOAP is
> already
> integrated,
That's true.
> I can find soap-tcp.jar under the modules. I added a
> configuration similiar to the one you posted but Glassfish fails to
> start.
What exactly error you see?
Can you pls. run the GF is standalone mode like:
java -Xmx512m -jar ../glassfish/modules/glassfish.jar
cause there is some logging issue now, and you may not see entire log
in server.log file.
Thanks.
WBR,
Alexey.
>
> melshami wrote:
>>
>> Thanks Alexey, I managed to install the bundle using Flex shell, I
>> think
>> in the current build there is no need to add other paths to
>> felix.auto.start.1, now I will need to test the custom filter:)
>>
>> The exception is similiar to the previous one but I don't think it's
>> ClassDefNotFound exception.
>>
>> java.lang.NullPointerException
>> at
>> com
>> .sun
>> .grizzly
>> .config
>> .GrizzlyServiceListener
>> .initializeListener(GrizzlyServiceListener.java:83)
>> at
>> com
>> .sun
>> .grizzly
>> .config
>> .GrizzlyServiceListener.configure(GrizzlyServiceListener.java:77)
>> at
>> com
>> .sun
>> .enterprise
>> .v3.services.impl.GrizzlyListener.configure(GrizzlyListener.java:59)
>> at
>> com
>> .sun
>> .enterprise
>> .v3.services.impl.GrizzlyProxy.configureGrizzly(GrizzlyProxy.java:
>> 125)
>> at
>> com
>> .sun
>> .enterprise.v3.services.impl.GrizzlyProxy.<init>(GrizzlyProxy.java:
>> 116)
>>
>> BR,
>> Mohamed
>>
>> Oleksiy Stashok wrote:
>>>
>>> Hello again :)
>>>
>>>> I see the changes is with network listener protocol attribute value
>>>> for the
>>>> http and admin listeners. I tested all possible alternatives before
>>>> bothering you with one more question:).
>>> Just to check, do you see any exceptions in a log?
>>>
>>>
>>>> btw I am using glassfish-v3-b66-windows version. Could it be the a
>>>> problem
>>>> with this build?
>>> It should be fine, I believe.
>>>
>>>> I have attached TCPProtcol.jar in case if you wanted to test it
>>>> yourself,
>>>> but I doubt it even reached the pointer where the classes were
>>>> loaded
>>>> http://www.nabble.com/file/p25767056/TCPProtocol.jar
>>>> TCPProtocol.jar
>>> Ok, how do you include jar above to a GF? :) IMO this is the issue.
>>>
>>> AFAIK you have to create osgi module from your jar and install it to
>>> GFv3.
>>>
>>> 1) How to create osgi module?
>>> Here I'm not big expert. You can take a look on internet, or check
>>> grizzly project's maven scripts to see how you can make osgi module.
>>> What I did with the jar you sent - is unpacked it and changed
>>> MANIFEST.MF file, so it looks like [1] and then repackaged jar file
>>> again.
>>>
>>> 2) Install osgi module to GFv3
>>> Not sure, may be it could be done easier way, but here are steps I
>>> did.
>>>
>>> 2.1) Enabled Felix shell for GFv3
>>> You can take a look here [2], but note that paths there are
>>> incorrect.
>>> Here are correct paths [3]
>>>
>>> 2.2) Install osgi module
>>> Please look at [4], starting from step 5, but run glassfish using
>>> (suppose you're in glassfishv3/bin folder)
>>> java -Xmx512m -jar ../glassfish/modules/glassfish.jar
>>>
>>> 2.3) Done
>>> After installing osgi module, restart GFv3 - it should work.
>>> Seems it works for me.
>>>
>>> Thanks.
>>>
>>> WBR,
>>> Alexey.
>>>
>>>
>>> [1]
>>> Manifest-Version: 1.0
>>> Ant-Version: Apache Ant 1.7.1
>>> Created-By: 14.0-b16 (Sun Microsystems Inc.)
>>> X-COMMENT: Main-Class will be added automatically by build
>>> Export-Package: scedev.grizzly.protocols
>>> implementation-version: 0.1
>>> package: scedev.grizzly.protocols
>>> Bundle-Name: scedev-grizzly
>>> Bundle-Vendor: scedev
>>> Bundle-Version: 0.1
>>> Bnd-LastModified: 1254747835722
>>> Bundle-ManifestVersion: 2
>>> Bundle-SymbolicName: scedev.grizzly.protocols
>>> Import-Package:
>>> com
>>> .sun
>>> .grizzly
>>> ,com
>>> .sun
>>> .grizzly
>>> .filter
>>> ,com
>>> .sun
>>> .grizzly
>>> .http
>>> ,com
>>> .sun
>>> .grizzly.http.portunif,com.sun.grizzly.portunif,com.sun.grizzly.util
>>>
>>> [2] http://blogs.sun.com/arungupta/entry/totd_34_using_felix_shell
>>>
>>> [3] felix.auto.start.1= \
>>> reference:${com.sun.aas.installRootURI}modules/osgi-main.jar\
>>> ${com.sun.aas.installRootURI}modules/org.apache.felix.shell.jar \
>>> ${com.sun.aas.installRootURI}modules/org.apache.felix.shell.tui.jar
>>>
>>> [4] http://blogs.sun.com/arungupta/entry/totd_36_deploy_osgi_bundles
>>>
>>>
>>>>
>>>> Oleksiy Stashok wrote:
>>>>>
>>>>> Hi Mohamed,
>>>>>
>>>>> my fault, please try following config:
>>>>>
>>>>> <network-config>
>>>>> <protocols>
>>>>> <protocol name="pu-protocol">
>>>>> <port-unification>
>>>>> <protocol-finder protocol="http"
>>>>> classname="com.sun.grizzly.http.portunif.HttpProtocolFinder"
>>>>> name="http-finder" />
>>>>> <protocol-finder protocol="rpc"
>>>>> classname="scedev.grizzly.protocols.TCPProtocolFinder" name="rpc-
>>>>> protocol-finder" />
>>>>> </port-unification>
>>>>> </protocol>
>>>>> <protocol name="http">
>>>>> <http max-connections="250" default-virtual-
>>>>> server="server" server-name="" />
>>>>> </protocol>
>>>>> <protocol name="rpc">
>>>>> <protocol-chain-instance-handler>
>>>>> <protocol-chain>
>>>>> <protocol-filter
>>>>> classname="scedev.grizzly.protocols.TCPProtocolFilter" name="rpc-
>>>>> filter" />
>>>>> </protocol-chain>
>>>>> </protocol-chain-instance-handler>
>>>>> </protocol>
>>>>> <protocol name="http-listener-1">
>>>>> <http max-connections="250" default-virtual-
>>>>> server="server" server-name="">
>>>>> <file-cache enabled="false" />
>>>>> </http>
>>>>> </protocol>
>>>>> <protocol security-enabled="true" name="http-listener-2">
>>>>> <http max-connections="250" default-virtual-
>>>>> server="server" server-name="">
>>>>> <file-cache enabled="false" />
>>>>> </http>
>>>>> <ssl ssl3-enabled="false" cert-nickname="s1as" />
>>>>> </protocol>
>>>>> <protocol name="admin-listener">
>>>>> <http max-connections="250" default-virtual-
>>>>> server="__asadmin" server-name="">
>>>>> <file-cache enabled="false" />
>>>>> </http>
>>>>> </protocol>
>>>>> </protocols>
>>>>> <network-listeners>
>>>>> <network-listener port="8787" protocol="pu-protocol"
>>>>> transport="tcp" name="tcprpc-listener" thread-pool="thread-
>>>>> pool-1" />
>>>>> <network-listener port="8080" protocol="http-listener-1"
>>>>> transport="tcp" name="http-listener-1" thread-pool="http-thread-
>>>>> pool" />
>>>>> <network-listener port="4848" protocol="admin-listener"
>>>>> transport="tcp" name="admin-listener" thread-pool="thread-
>>>>> pool-1" />
>>>>> </network-listeners>
>>>>> <transports>
>>>>> <transport name="tcp" />
>>>>> </transports>
>>>>> </network-config>
>>>>>
>>>>> WBR,
>>>>> Alexey.
>>>>>
>>>>> On Oct 6, 2009, at 12:53 , melshami wrote:
>>>>>
>>>>>>
>>>>>> Hi Alexey,
>>>>>>
>>>>>> Thanks for bearing with me, still no luck. I tried your
>>>>>> suggestion
>>>>>> and I
>>>>>> tried different variations of configuration protocol element.
>>>>>>
>>>>>> here is my current configuration:
>>>>>> <network-config>
>>>>>> <protocols>
>>>>>> <protocol name="pu-protocol">
>>>>>> <port-unification>
>>>>>> <protocol-finder protocol="http"
>>>>>> classname="com.sun.grizzly.http.portunif.HttpProtocolFinder"
>>>>>> name="http-finder" />
>>>>>> <protocol-finder protocol="rpc"
>>>>>> classname="scedev.grizzly.protocols.TCPProtocolFinder"
>>>>>> name="rpc-protocol-finder" />
>>>>>> </port-unification>
>>>>>> </protocol>
>>>>>> <protocol name="http" />
>>>>>> <protocol name="rpc">
>>>>>> <protocol-chain-instance-handler>
>>>>>> <protocol-chain>
>>>>>> <protocol-filter
>>>>>> classname="scedev.grizzly.protocols.TCPProtocolFilter" name="rpc-
>>>>>> filter" />
>>>>>> </protocol-chain>
>>>>>> </protocol-chain-instance-handler>
>>>>>> </protocol>
>>>>>> <protocol name="http-listener-1">
>>>>>> <http max-connections="250" default-virtual-
>>>>>> server="server"
>>>>>> server-name="">
>>>>>> <file-cache enabled="false" />
>>>>>> </http>
>>>>>> </protocol>
>>>>>> <protocol security-enabled="true" name="http-listener-2">
>>>>>> <http max-connections="250" default-virtual-
>>>>>> server="server"
>>>>>> server-name="">
>>>>>> <file-cache enabled="false" />
>>>>>> </http>
>>>>>> <ssl ssl3-enabled="false" cert-nickname="s1as" />
>>>>>> </protocol>
>>>>>> <protocol name="admin-listener">
>>>>>> <http max-connections="250" default-virtual-
>>>>>> server="__asadmin"
>>>>>> server-name="">
>>>>>> <file-cache enabled="false" />
>>>>>> </http>
>>>>>> </protocol>
>>>>>> </protocols>
>>>>>> <network-listeners>
>>>>>> <network-listener port="8787" protocol="pu-protocol"
>>>>>> transport="tcp" name="tcprpc-listener" thread-pool="thread-
>>>>>> pool-1" />
>>>>>> <network-listener port="8080" protocol="pu-protocol"
>>>>>> transport="tcp" name="http-listener-1" thread-pool="http-thread-
>>>>>> pool" />
>>>>>> <network-listener port="4848" protocol="pu-protocol"
>>>>>> transport="tcp" name="admin-listener" thread-pool="thread-
>>>>>> pool-1" />
>>>>>> </network-listeners>
>>>>>> <transports>
>>>>>> <transport name="tcp" />
>>>>>> </transports>
>>>>>> </network-config>
>>>>>>
>>>>>> Oleksiy Stashok wrote:
>>>>>>>
>>>>>>> Hi Mohamed,
>>>>>>>
>>>>>>> hmm, this is a bug - I'll fix it for coming GF release.
>>>>>>> Meanwhile you can workaround this issue by declaring http
>>>>>>> protocol,
>>>>>>> within the port unification declaration, together with rpc
>>>>>>> protocol,
>>>>>>> like:
>>>>>>>
>>>>>>> <protocol name="pu-protocol">
>>>>>>> <port-unification>
>>>>>>> <protocol-finder name="http-finder"
>>>>>>> classname="com.sun.grizzly.http.portunif.HttpProtocolFinder"
>>>>>>> protocol="http"/>
>>>>>>> <protocol-finder name="rpc-protocol-finder"
>>>>>>> classname="scedev.grizzly.protocols.TCPProtocolFinder"
>>>>>>> protocol="rpc"/>
>>>>>>> </port-unification>
>>>>>>> </protocol>
>>>>>>>
>>>>>>> <protocol name="http">
>>>>>>> </protocol>
>>>>>>>
>>>>>>>
>>>>>>> WBR,
>>>>>>> Alexey.
>>>>>>>
>>>>>>> On Oct 6, 2009, at 10:55 , melshami wrote:
>>>>>>>
>>>>>>>>
>>>>>>>> Hi Alexey,
>>>>>>>>
>>>>>>>> I Can't seem to get this right, here is my configuration:
>>>>>>>>
>>>>>>>> <network-config>
>>>>>>>> <protocols>
>>>>>>>> <protocol name="pu-protocol">
>>>>>>>> <port-unification>
>>>>>>>> <protocol-finder protocol="rpc" name="rpc-protocol-
>>>>>>>> finder"
>>>>>>>> classname="scedev.grizzly.protocols.TCPProtocolFinder" />
>>>>>>>> </port-unification>
>>>>>>>> </protocol>
>>>>>>>> <protocol name="rpc">
>>>>>>>> <protocol-chain-instance-handler>
>>>>>>>> <protocol-chain>
>>>>>>>> <protocol-filter name="rpc"
>>>>>>>> classname="scedev.grizzly.protocols.TCPProtocolFilter" />
>>>>>>>> </protocol-chain>
>>>>>>>> </protocol-chain-instance-handler>
>>>>>>>> </protocol>
>>>>>>>> <protocol name="http-listener-1">
>>>>>>>> <http default-virtual-server="server" max-
>>>>>>>> connections="250"
>>>>>>>> server-name="">
>>>>>>>> <file-cache enabled="false" />
>>>>>>>> </http>
>>>>>>>> </protocol>
>>>>>>>> <protocol security-enabled="true" name="http-listener-2">
>>>>>>>> <http default-virtual-server="server" max-
>>>>>>>> connections="250"
>>>>>>>> server-name="">
>>>>>>>> <file-cache enabled="false" />
>>>>>>>> </http>
>>>>>>>> <ssl ssl3-enabled="false" cert-nickname="s1as" />
>>>>>>>> </protocol>
>>>>>>>> <protocol name="admin-listener">
>>>>>>>> <http default-virtual-server="__asadmin" max-
>>>>>>>> connections="250"
>>>>>>>> server-name="">
>>>>>>>> <file-cache enabled="false" />
>>>>>>>> </http>
>>>>>>>> </protocol>
>>>>>>>> </protocols>
>>>>>>>> <network-listeners>
>>>>>>>> <network-listener port="8787" protocol="pu-protocol"
>>>>>>>> transport="tcp" name="tcprpc-listener" thread-pool="http-
>>>>>>>> thread-
>>>>>>>> pool" />
>>>>>>>> <network-listener port="8080" protocol="http-listener-1"
>>>>>>>> transport="tcp" name="http-listener-1" thread-pool="http-
>>>>>>>> thread-
>>>>>>>> pool" />
>>>>>>>> <network-listener port="8181" protocol="http-listener-2"
>>>>>>>> transport="tcp" name="http-listener-2" thread-pool="http-
>>>>>>>> thread-
>>>>>>>> pool" />
>>>>>>>> <network-listener port="4848" protocol="admin-listener"
>>>>>>>> transport="tcp" name="admin-listener" thread-pool="http-thread-
>>>>>>>> pool" />
>>>>>>>> </network-listeners>
>>>>>>>> <transports>
>>>>>>>> <transport name="tcp" />
>>>>>>>> </transports>
>>>>>>>> </network-config>
>>>>>>>>
>>>>>>>> GlassFish won't start due to this exception:
>>>>>>>>
>>>>>>>> #|2009-10-06T09:48:46.654+0100|SEVERE|glassfish|null|
>>>>>>>> _ThreadID=11;_ThreadName=Thread-3;|Unable
>>>>>>>> to start v3. Closing all ports
>>>>>>>> java.lang.NullPointerException
>>>>>>>> at
>>>>>>>> com
>>>>>>>> .sun
>>>>>>>> .grizzly
>>>>>>>> .config
>>>>>>>> .GrizzlyServiceListener
>>>>>>>> .initializeListener(GrizzlyServiceListener.java:83)
>>>>>>>> at
>>>>>>>> com
>>>>>>>> .sun
>>>>>>>> .grizzly
>>>>>>>> .config
>>>>>>>> .GrizzlyServiceListener.configure(GrizzlyServiceListener.java:
>>>>>>>> 77)
>>>>>>>> at
>>>>>>>> com
>>>>>>>> .sun
>>>>>>>> .enterprise
>>>>>>>> .v3
>>>>>>>> .services.impl.GrizzlyListener.configure(GrizzlyListener.java:
>>>>>>>> 59)
>>>>>>>> at
>>>>>>>> com
>>>>>>>> .sun
>>>>>>>> .enterprise
>>>>>>>> .v3
>>>>>>>> .services.impl.GrizzlyProxy.configureGrizzly(GrizzlyProxy.java:
>>>>>>>> 125)
>>>>>>>> at
>>>>>>>> com
>>>>>>>> .sun
>>>>>>>> .enterprise
>>>>>>>> .v3.services.impl.GrizzlyProxy.<init>(GrizzlyProxy.java:
>>>>>>>> 116)
>>>>>>>> at
>>>>>>>> com
>>>>>>>> .sun
>>>>>>>> .enterprise
>>>>>>>> .v3
>>>>>>>> .services
>>>>>>>> .impl.GrizzlyService.createNetworkProxy(GrizzlyService.java:
>>>>>>>> 344)
>>>>>>>> at
>>>>>>>> com
>>>>>>>> .sun
>>>>>>>> .enterprise
>>>>>>>> .v3
>>>>>>>> .services
>>>>>>>> .impl.GrizzlyService.postConstruct(GrizzlyService.java:
>>>>>>>> 266)
>>>>>>>> at
>>>>>>>> com
>>>>>>>> .sun
>>>>>>>> .hk2.component.AbstractWombImpl.inject(AbstractWombImpl.java:
>>>>>>>> 174)
>>>>>>>> at com.sun.hk2.component.ConstructorWomb
>>>>>>>> $1.run(ConstructorWomb.java:
>>>>>>>> 91)
>>>>>>>> at java.security.AccessController.doPrivileged(Native Method)
>>>>>>>>
>>>>>>>> I have set the classpath for the custom protocol filter and
>>>>>>>> finder
>>>>>>>> in the
>>>>>>>> JVM classpath settings.
>>>>>>>>
>>>>>>>> Is there anything else I am missing?
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>> Mohamed
>>>>>>>>
>>>>>>>> melshami wrote:
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> It's not a problem at all, am still testing we have enough
>>>>>>>>> time
>>>>>>>>> before
>>>>>>>>> production so I hope there will be a new release soon. I
>>>>>>>>> will try
>>>>>>>>> that and
>>>>>>>>> will get back to you.
>>>>>>>>>
>>>>>>>>> Thanks for your help:)
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>>>
>>>>>>>>>>> I think since I am using glassfish-prelude v3 it still
>>>>>>>>>>> uses v2
>>>>>>>>>>> configuraiton
>>>>>>>>>>> scheme, if I am correct it's sun-domain_1_3.dtd which has
>>>>>>>>>>> all
>>>>>>>>>>> network
>>>>>>>>>>> configuration under the <http-service> element. So I am not
>>>>>>>>>>> sure
>>>>>>>>>>> where to
>>>>>>>>>>> set the protocol-finder name under this scheme.
>>>>>>>>>> I think there is no way to use port unification with
>>>>>>>>>> prelude :(
>>>>>>>>>> Will it be a problem for you to use latest promoted GFv3 [1]?
>>>>>>>>>>
>>>>>>>>>> Thanks.
>>>>>>>>>>
>>>>>>>>>> WBR,
>>>>>>>>>> Alexey.
>>>>>>>>>>
>>>>>>>>>> [1] http://download.java.net/glassfish/v3/promoted/
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Thanks,
>>>>>>>>>>> Mohamed
>>>>>>>>>>>
>>>>>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> Hi,
>>>>>>>>>>>>
>>>>>>>>>>>> you can take a look at config module in grizzly workspace
>>>>>>>>>>>> [1].
>>>>>>>>>>>> There you can find unit tests with different configurations
>>>>>>>>>>>> like
>>>>>>>>>>>> [2],
>>>>>>>>>>>> which actually has port unification enabled, but you can
>>>>>>>>>>>> redefine
>>>>>>>>>>>> config to use X-protocol directly without port unification.
>>>>>>>>>>>>
>>>>>>>>>>>> WBR,
>>>>>>>>>>>> Alexey.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> [1] svn checkout
>>>>>>>>>>>> https://www.dev.java.net/svn/grizzly/trunk/code/modules/config
>>>>>>>>>>>> [2]
>>>>>>>>>>>> <network-config>
>>>>>>>>>>>> <transports>
>>>>>>>>>>>> <transport name="tcp"/>
>>>>>>>>>>>> </transports>
>>>>>>>>>>>> <protocols>
>>>>>>>>>>>> <protocol name="pu-protocol">
>>>>>>>>>>>> <port-unification>
>>>>>>>>>>>> <protocol-finder name="http-finder"
>>>>>>>>>>>> classname
>>>>>>>>>>>> ="com.sun.grizzly.http.portunif.HttpProtocolFinder"
>>>>>>>>>>>> protocol="http"/>
>>>>>>>>>>>> <protocol-finder name="X-protocol-finder"
>>>>>>>>>>>> classname="com.sun.grizzly.config.XProtocolFinder"
>>>>>>>>>>>> protocol="X-
>>>>>>>>>>>> protocol"/>
>>>>>>>>>>>> </port-unification>
>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>
>>>>>>>>>>>> <protocol name="http">
>>>>>>>>>>>> <http enable-comet-support="true"/>
>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>
>>>>>>>>>>>> <protocol name="X-protocol">
>>>>>>>>>>>> <protocol-chain-instance-handler>
>>>>>>>>>>>> <protocol-chain>
>>>>>>>>>>>> <protocol-filter name="x-filter"
>>>>>>>>>>>> classname="com.sun.grizzly.config.XProtocolFilter"/>
>>>>>>>>>>>> </protocol-chain>
>>>>>>>>>>>> </protocol-chain-instance-handler>
>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>
>>>>>>>>>>>> </protocols>
>>>>>>>>>>>> <network-listeners>
>>>>>>>>>>>> <thread-pool name="defaultThreadPool"/>
>>>>>>>>>>>> <network-listener name="http-listener" port="38082"
>>>>>>>>>>>> transport="tcp" protocol="pu-protocol" thread-
>>>>>>>>>>>> pool="defaultThreadPool"/>
>>>>>>>>>>>> </network-listeners>
>>>>>>>>>>>> </network-config>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Oct 5, 2009, at 15:14 , melshami wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Hi Alexey,
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks very much for the prompt reply. I am a bit
>>>>>>>>>>>>> confused to
>>>>>>>>>>>>> be
>>>>>>>>>>>>> honest
>>>>>>>>>>>>> since I am new to Grizzly. But I wish to configure a
>>>>>>>>>>>>> listener
>>>>>>>>>>>>> which
>>>>>>>>>>>>> listens
>>>>>>>>>>>>> to custom TCP based protocol. As a starting point I am
>>>>>>>>>>>>> trying
>>>>>>>>>>>>> to
>>>>>>>>>>>>> configure a
>>>>>>>>>>>>> simple echo server which replies to socket connections on
>>>>>>>>>>>>> GlassFish
>>>>>>>>>>>>> v3.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>> Mohamed
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi Mohamed,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I can't seem to find any documentation for how to
>>>>>>>>>>>>>>> configure
>>>>>>>>>>>>>>> grizlly
>>>>>>>>>>>>>>> listeners and connectors on GlassFish v3.
>>>>>>>>>>>>>> Currently doc team is working on that.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> So far I can find only this page
>>>>>>>>>>>>>>> http://wiki.glassfish.java.net/Wiki.jsp?
>>>>>>>>>>>>>>> page=GrizzlyConfigOnePager,
>>>>>>>>>>>>>>> which
>>>>>>>>>>>>>>> refers to a new scheme and it's not complete yet.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Anyone can help with this please?
>>>>>>>>>>>>>> Do you have any specific item in mind you'd like to
>>>>>>>>>>>>>> configure?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> WBR,
>>>>>>>>>>>>>> Alexey.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> BR,
>>>>>>>>>>>>>>> Mohamed
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> View this message in context:
>>>>>>>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25750048.html
>>>>>>>>>>>>>>> Sent from the Grizzly - Users mailing list archive at
>>>>>>>>>>>>>>> Nabble.com.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>>>> To unsubscribe, e-mail: users-
>>>>>>>>>>>>>>> unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>>>> For additional commands, e-mail: users-
>>>>>>>>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>>> For additional commands, e-mail:
>>>>>>>>>>>>>> users-help_at_grizzly.dev.java.net
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> View this message in context:
>>>>>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25750628.html
>>>>>>>>>>>>> Sent from the Grizzly - Users mailing list archive at
>>>>>>>>>>>>> Nabble.com.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>> To unsubscribe, e-mail: users-
>>>>>>>>>>>>> unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>> For additional commands, e-mail: users-
>>>>>>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> View this message in context:
>>>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25752899.html
>>>>>>>>>>> Sent from the Grizzly - Users mailing list archive at
>>>>>>>>>>> Nabble.com.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>> For additional commands, e-mail: users-
>>>>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>> To unsubscribe, e-mail: users-
>>>>>>>>>> unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> View this message in context:
>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25765021.html
>>>>>>>> Sent from the Grizzly - Users mailing list archive at
>>>>>>>> Nabble.com.
>>>>>>>>
>>>>>>>>
>>>>>>>> ---------------------------------------------------------------------
>>>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>> For additional commands, e-mail: users-
>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> ---------------------------------------------------------------------
>>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> --
>>>>>> View this message in context:
>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25766557.html
>>>>>> Sent from the Grizzly - Users mailing list archive at Nabble.com.
>>>>>>
>>>>>>
>>>>>> ---------------------------------------------------------------------
>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>>>
>>>>>
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>>
>>>>>
>>>>>
>>>>
>>>> --
>>>> View this message in context:
>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25767056.html
>>>> Sent from the Grizzly - Users mailing list archive at Nabble.com.
>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>
>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>
>>>
>>>
>>
>>
>
> --
> View this message in context: http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25802994.html
> Sent from the Grizzly - Users mailing list archive at Nabble.com.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>