Thanks Alexey, I managed to install the bundle using Flex shell, I think in
the current build there is no need to add other paths to felix.auto.start.1,
now I will need to test the custom filter:)
Oleksiy Stashok wrote:
>
> Hello again :)
>
>> I see the changes is with network listener protocol attribute value
>> for the
>> http and admin listeners. I tested all possible alternatives before
>> bothering you with one more question:).
> Just to check, do you see any exceptions in a log?
>
>
>> btw I am using glassfish-v3-b66-windows version. Could it be the a
>> problem
>> with this build?
> It should be fine, I believe.
>
>> I have attached TCPProtcol.jar in case if you wanted to test it
>> yourself,
>> but I doubt it even reached the pointer where the classes were loaded
>> http://www.nabble.com/file/p25767056/TCPProtocol.jar TCPProtocol.jar
> Ok, how do you include jar above to a GF? :) IMO this is the issue.
>
> AFAIK you have to create osgi module from your jar and install it to
> GFv3.
>
> 1) How to create osgi module?
> Here I'm not big expert. You can take a look on internet, or check
> grizzly project's maven scripts to see how you can make osgi module.
> What I did with the jar you sent - is unpacked it and changed
> MANIFEST.MF file, so it looks like [1] and then repackaged jar file
> again.
>
> 2) Install osgi module to GFv3
> Not sure, may be it could be done easier way, but here are steps I did.
>
> 2.1) Enabled Felix shell for GFv3
> You can take a look here [2], but note that paths there are incorrect.
> Here are correct paths [3]
>
> 2.2) Install osgi module
> Please look at [4], starting from step 5, but run glassfish using
> (suppose you're in glassfishv3/bin folder)
> java -Xmx512m -jar ../glassfish/modules/glassfish.jar
>
> 2.3) Done
> After installing osgi module, restart GFv3 - it should work.
> Seems it works for me.
>
> Thanks.
>
> WBR,
> Alexey.
>
>
> [1]
> Manifest-Version: 1.0
> Ant-Version: Apache Ant 1.7.1
> Created-By: 14.0-b16 (Sun Microsystems Inc.)
> X-COMMENT: Main-Class will be added automatically by build
> Export-Package: scedev.grizzly.protocols
> implementation-version: 0.1
> package: scedev.grizzly.protocols
> Bundle-Name: scedev-grizzly
> Bundle-Vendor: scedev
> Bundle-Version: 0.1
> Bnd-LastModified: 1254747835722
> Bundle-ManifestVersion: 2
> Bundle-SymbolicName: scedev.grizzly.protocols
> Import-Package:
> com
> .sun
> .grizzly
> ,com
> .sun
> .grizzly
> .filter
> ,com
> .sun
> .grizzly
> .http
> ,com
> .sun.grizzly.http.portunif,com.sun.grizzly.portunif,com.sun.grizzly.util
>
> [2] http://blogs.sun.com/arungupta/entry/totd_34_using_felix_shell
>
> [3] felix.auto.start.1= \
> reference:${com.sun.aas.installRootURI}modules/osgi-main.jar\
> ${com.sun.aas.installRootURI}modules/org.apache.felix.shell.jar \
> ${com.sun.aas.installRootURI}modules/org.apache.felix.shell.tui.jar
>
> [4] http://blogs.sun.com/arungupta/entry/totd_36_deploy_osgi_bundles
>
>
>>
>> Oleksiy Stashok wrote:
>>>
>>> Hi Mohamed,
>>>
>>> my fault, please try following config:
>>>
>>> <network-config>
>>> <protocols>
>>> <protocol name="pu-protocol">
>>> <port-unification>
>>> <protocol-finder protocol="http"
>>> classname="com.sun.grizzly.http.portunif.HttpProtocolFinder"
>>> name="http-finder" />
>>> <protocol-finder protocol="rpc"
>>> classname="scedev.grizzly.protocols.TCPProtocolFinder" name="rpc-
>>> protocol-finder" />
>>> </port-unification>
>>> </protocol>
>>> <protocol name="http">
>>> <http max-connections="250" default-virtual-
>>> server="server" server-name="" />
>>> </protocol>
>>> <protocol name="rpc">
>>> <protocol-chain-instance-handler>
>>> <protocol-chain>
>>> <protocol-filter
>>> classname="scedev.grizzly.protocols.TCPProtocolFilter" name="rpc-
>>> filter" />
>>> </protocol-chain>
>>> </protocol-chain-instance-handler>
>>> </protocol>
>>> <protocol name="http-listener-1">
>>> <http max-connections="250" default-virtual-
>>> server="server" server-name="">
>>> <file-cache enabled="false" />
>>> </http>
>>> </protocol>
>>> <protocol security-enabled="true" name="http-listener-2">
>>> <http max-connections="250" default-virtual-
>>> server="server" server-name="">
>>> <file-cache enabled="false" />
>>> </http>
>>> <ssl ssl3-enabled="false" cert-nickname="s1as" />
>>> </protocol>
>>> <protocol name="admin-listener">
>>> <http max-connections="250" default-virtual-
>>> server="__asadmin" server-name="">
>>> <file-cache enabled="false" />
>>> </http>
>>> </protocol>
>>> </protocols>
>>> <network-listeners>
>>> <network-listener port="8787" protocol="pu-protocol"
>>> transport="tcp" name="tcprpc-listener" thread-pool="thread-pool-1" />
>>> <network-listener port="8080" protocol="http-listener-1"
>>> transport="tcp" name="http-listener-1" thread-pool="http-thread-
>>> pool" />
>>> <network-listener port="4848" protocol="admin-listener"
>>> transport="tcp" name="admin-listener" thread-pool="thread-pool-1" />
>>> </network-listeners>
>>> <transports>
>>> <transport name="tcp" />
>>> </transports>
>>> </network-config>
>>>
>>> WBR,
>>> Alexey.
>>>
>>> On Oct 6, 2009, at 12:53 , melshami wrote:
>>>
>>>>
>>>> Hi Alexey,
>>>>
>>>> Thanks for bearing with me, still no luck. I tried your suggestion
>>>> and I
>>>> tried different variations of configuration protocol element.
>>>>
>>>> here is my current configuration:
>>>> <network-config>
>>>> <protocols>
>>>> <protocol name="pu-protocol">
>>>> <port-unification>
>>>> <protocol-finder protocol="http"
>>>> classname="com.sun.grizzly.http.portunif.HttpProtocolFinder"
>>>> name="http-finder" />
>>>> <protocol-finder protocol="rpc"
>>>> classname="scedev.grizzly.protocols.TCPProtocolFinder"
>>>> name="rpc-protocol-finder" />
>>>> </port-unification>
>>>> </protocol>
>>>> <protocol name="http" />
>>>> <protocol name="rpc">
>>>> <protocol-chain-instance-handler>
>>>> <protocol-chain>
>>>> <protocol-filter
>>>> classname="scedev.grizzly.protocols.TCPProtocolFilter" name="rpc-
>>>> filter" />
>>>> </protocol-chain>
>>>> </protocol-chain-instance-handler>
>>>> </protocol>
>>>> <protocol name="http-listener-1">
>>>> <http max-connections="250" default-virtual-
>>>> server="server"
>>>> server-name="">
>>>> <file-cache enabled="false" />
>>>> </http>
>>>> </protocol>
>>>> <protocol security-enabled="true" name="http-listener-2">
>>>> <http max-connections="250" default-virtual-
>>>> server="server"
>>>> server-name="">
>>>> <file-cache enabled="false" />
>>>> </http>
>>>> <ssl ssl3-enabled="false" cert-nickname="s1as" />
>>>> </protocol>
>>>> <protocol name="admin-listener">
>>>> <http max-connections="250" default-virtual-
>>>> server="__asadmin"
>>>> server-name="">
>>>> <file-cache enabled="false" />
>>>> </http>
>>>> </protocol>
>>>> </protocols>
>>>> <network-listeners>
>>>> <network-listener port="8787" protocol="pu-protocol"
>>>> transport="tcp" name="tcprpc-listener" thread-pool="thread-
>>>> pool-1" />
>>>> <network-listener port="8080" protocol="pu-protocol"
>>>> transport="tcp" name="http-listener-1" thread-pool="http-thread-
>>>> pool" />
>>>> <network-listener port="4848" protocol="pu-protocol"
>>>> transport="tcp" name="admin-listener" thread-pool="thread-pool-1" />
>>>> </network-listeners>
>>>> <transports>
>>>> <transport name="tcp" />
>>>> </transports>
>>>> </network-config>
>>>>
>>>> Oleksiy Stashok wrote:
>>>>>
>>>>> Hi Mohamed,
>>>>>
>>>>> hmm, this is a bug - I'll fix it for coming GF release.
>>>>> Meanwhile you can workaround this issue by declaring http protocol,
>>>>> within the port unification declaration, together with rpc
>>>>> protocol,
>>>>> like:
>>>>>
>>>>> <protocol name="pu-protocol">
>>>>> <port-unification>
>>>>> <protocol-finder name="http-finder"
>>>>> classname="com.sun.grizzly.http.portunif.HttpProtocolFinder"
>>>>> protocol="http"/>
>>>>> <protocol-finder name="rpc-protocol-finder"
>>>>> classname="scedev.grizzly.protocols.TCPProtocolFinder"
>>>>> protocol="rpc"/>
>>>>> </port-unification>
>>>>> </protocol>
>>>>>
>>>>> <protocol name="http">
>>>>> </protocol>
>>>>>
>>>>>
>>>>> WBR,
>>>>> Alexey.
>>>>>
>>>>> On Oct 6, 2009, at 10:55 , melshami wrote:
>>>>>
>>>>>>
>>>>>> Hi Alexey,
>>>>>>
>>>>>> I Can't seem to get this right, here is my configuration:
>>>>>>
>>>>>> <network-config>
>>>>>> <protocols>
>>>>>> <protocol name="pu-protocol">
>>>>>> <port-unification>
>>>>>> <protocol-finder protocol="rpc" name="rpc-protocol-
>>>>>> finder"
>>>>>> classname="scedev.grizzly.protocols.TCPProtocolFinder" />
>>>>>> </port-unification>
>>>>>> </protocol>
>>>>>> <protocol name="rpc">
>>>>>> <protocol-chain-instance-handler>
>>>>>> <protocol-chain>
>>>>>> <protocol-filter name="rpc"
>>>>>> classname="scedev.grizzly.protocols.TCPProtocolFilter" />
>>>>>> </protocol-chain>
>>>>>> </protocol-chain-instance-handler>
>>>>>> </protocol>
>>>>>> <protocol name="http-listener-1">
>>>>>> <http default-virtual-server="server" max-
>>>>>> connections="250"
>>>>>> server-name="">
>>>>>> <file-cache enabled="false" />
>>>>>> </http>
>>>>>> </protocol>
>>>>>> <protocol security-enabled="true" name="http-listener-2">
>>>>>> <http default-virtual-server="server" max-
>>>>>> connections="250"
>>>>>> server-name="">
>>>>>> <file-cache enabled="false" />
>>>>>> </http>
>>>>>> <ssl ssl3-enabled="false" cert-nickname="s1as" />
>>>>>> </protocol>
>>>>>> <protocol name="admin-listener">
>>>>>> <http default-virtual-server="__asadmin" max-
>>>>>> connections="250"
>>>>>> server-name="">
>>>>>> <file-cache enabled="false" />
>>>>>> </http>
>>>>>> </protocol>
>>>>>> </protocols>
>>>>>> <network-listeners>
>>>>>> <network-listener port="8787" protocol="pu-protocol"
>>>>>> transport="tcp" name="tcprpc-listener" thread-pool="http-thread-
>>>>>> pool" />
>>>>>> <network-listener port="8080" protocol="http-listener-1"
>>>>>> transport="tcp" name="http-listener-1" thread-pool="http-thread-
>>>>>> pool" />
>>>>>> <network-listener port="8181" protocol="http-listener-2"
>>>>>> transport="tcp" name="http-listener-2" thread-pool="http-thread-
>>>>>> pool" />
>>>>>> <network-listener port="4848" protocol="admin-listener"
>>>>>> transport="tcp" name="admin-listener" thread-pool="http-thread-
>>>>>> pool" />
>>>>>> </network-listeners>
>>>>>> <transports>
>>>>>> <transport name="tcp" />
>>>>>> </transports>
>>>>>> </network-config>
>>>>>>
>>>>>> GlassFish won't start due to this exception:
>>>>>>
>>>>>> #|2009-10-06T09:48:46.654+0100|SEVERE|glassfish|null|
>>>>>> _ThreadID=11;_ThreadName=Thread-3;|Unable
>>>>>> to start v3. Closing all ports
>>>>>> java.lang.NullPointerException
>>>>>> at
>>>>>> com
>>>>>> .sun
>>>>>> .grizzly
>>>>>> .config
>>>>>> .GrizzlyServiceListener
>>>>>> .initializeListener(GrizzlyServiceListener.java:83)
>>>>>> at
>>>>>> com
>>>>>> .sun
>>>>>> .grizzly
>>>>>> .config
>>>>>> .GrizzlyServiceListener.configure(GrizzlyServiceListener.java:
>>>>>> 77)
>>>>>> at
>>>>>> com
>>>>>> .sun
>>>>>> .enterprise
>>>>>> .v3.services.impl.GrizzlyListener.configure(GrizzlyListener.java:
>>>>>> 59)
>>>>>> at
>>>>>> com
>>>>>> .sun
>>>>>> .enterprise
>>>>>> .v3.services.impl.GrizzlyProxy.configureGrizzly(GrizzlyProxy.java:
>>>>>> 125)
>>>>>> at
>>>>>> com
>>>>>> .sun
>>>>>> .enterprise
>>>>>> .v3.services.impl.GrizzlyProxy.<init>(GrizzlyProxy.java:
>>>>>> 116)
>>>>>> at
>>>>>> com
>>>>>> .sun
>>>>>> .enterprise
>>>>>> .v3
>>>>>> .services
>>>>>> .impl.GrizzlyService.createNetworkProxy(GrizzlyService.java:
>>>>>> 344)
>>>>>> at
>>>>>> com
>>>>>> .sun
>>>>>> .enterprise
>>>>>> .v3
>>>>>> .services.impl.GrizzlyService.postConstruct(GrizzlyService.java:
>>>>>> 266)
>>>>>> at
>>>>>> com
>>>>>> .sun.hk2.component.AbstractWombImpl.inject(AbstractWombImpl.java:
>>>>>> 174)
>>>>>> at com.sun.hk2.component.ConstructorWomb
>>>>>> $1.run(ConstructorWomb.java:
>>>>>> 91)
>>>>>> at java.security.AccessController.doPrivileged(Native Method)
>>>>>>
>>>>>> I have set the classpath for the custom protocol filter and finder
>>>>>> in the
>>>>>> JVM classpath settings.
>>>>>>
>>>>>> Is there anything else I am missing?
>>>>>>
>>>>>> Regards,
>>>>>> Mohamed
>>>>>>
>>>>>> melshami wrote:
>>>>>>>
>>>>>>>
>>>>>>> It's not a problem at all, am still testing we have enough time
>>>>>>> before
>>>>>>> production so I hope there will be a new release soon. I will try
>>>>>>> that and
>>>>>>> will get back to you.
>>>>>>>
>>>>>>> Thanks for your help:)
>>>>>>>
>>>>>>>
>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>
>>>>>>>>> I think since I am using glassfish-prelude v3 it still uses v2
>>>>>>>>> configuraiton
>>>>>>>>> scheme, if I am correct it's sun-domain_1_3.dtd which has all
>>>>>>>>> network
>>>>>>>>> configuration under the <http-service> element. So I am not
>>>>>>>>> sure
>>>>>>>>> where to
>>>>>>>>> set the protocol-finder name under this scheme.
>>>>>>>> I think there is no way to use port unification with prelude :(
>>>>>>>> Will it be a problem for you to use latest promoted GFv3 [1]?
>>>>>>>>
>>>>>>>> Thanks.
>>>>>>>>
>>>>>>>> WBR,
>>>>>>>> Alexey.
>>>>>>>>
>>>>>>>> [1] http://download.java.net/glassfish/v3/promoted/
>>>>>>>>
>>>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>> Mohamed
>>>>>>>>>
>>>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>>>
>>>>>>>>>> Hi,
>>>>>>>>>>
>>>>>>>>>> you can take a look at config module in grizzly workspace [1].
>>>>>>>>>> There you can find unit tests with different configurations
>>>>>>>>>> like
>>>>>>>>>> [2],
>>>>>>>>>> which actually has port unification enabled, but you can
>>>>>>>>>> redefine
>>>>>>>>>> config to use X-protocol directly without port unification.
>>>>>>>>>>
>>>>>>>>>> WBR,
>>>>>>>>>> Alexey.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> [1] svn checkout
>>>>>>>>>> https://www.dev.java.net/svn/grizzly/trunk/code/modules/config
>>>>>>>>>> [2]
>>>>>>>>>> <network-config>
>>>>>>>>>> <transports>
>>>>>>>>>> <transport name="tcp"/>
>>>>>>>>>> </transports>
>>>>>>>>>> <protocols>
>>>>>>>>>> <protocol name="pu-protocol">
>>>>>>>>>> <port-unification>
>>>>>>>>>> <protocol-finder name="http-finder"
>>>>>>>>>> classname="com.sun.grizzly.http.portunif.HttpProtocolFinder"
>>>>>>>>>> protocol="http"/>
>>>>>>>>>> <protocol-finder name="X-protocol-finder"
>>>>>>>>>> classname="com.sun.grizzly.config.XProtocolFinder"
>>>>>>>>>> protocol="X-
>>>>>>>>>> protocol"/>
>>>>>>>>>> </port-unification>
>>>>>>>>>> </protocol>
>>>>>>>>>>
>>>>>>>>>> <protocol name="http">
>>>>>>>>>> <http enable-comet-support="true"/>
>>>>>>>>>> </protocol>
>>>>>>>>>>
>>>>>>>>>> <protocol name="X-protocol">
>>>>>>>>>> <protocol-chain-instance-handler>
>>>>>>>>>> <protocol-chain>
>>>>>>>>>> <protocol-filter name="x-filter"
>>>>>>>>>> classname="com.sun.grizzly.config.XProtocolFilter"/>
>>>>>>>>>> </protocol-chain>
>>>>>>>>>> </protocol-chain-instance-handler>
>>>>>>>>>> </protocol>
>>>>>>>>>>
>>>>>>>>>> </protocols>
>>>>>>>>>> <network-listeners>
>>>>>>>>>> <thread-pool name="defaultThreadPool"/>
>>>>>>>>>> <network-listener name="http-listener" port="38082"
>>>>>>>>>> transport="tcp" protocol="pu-protocol" thread-
>>>>>>>>>> pool="defaultThreadPool"/>
>>>>>>>>>> </network-listeners>
>>>>>>>>>> </network-config>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Oct 5, 2009, at 15:14 , melshami wrote:
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Hi Alexey,
>>>>>>>>>>>
>>>>>>>>>>> Thanks very much for the prompt reply. I am a bit confused to
>>>>>>>>>>> be
>>>>>>>>>>> honest
>>>>>>>>>>> since I am new to Grizzly. But I wish to configure a listener
>>>>>>>>>>> which
>>>>>>>>>>> listens
>>>>>>>>>>> to custom TCP based protocol. As a starting point I am trying
>>>>>>>>>>> to
>>>>>>>>>>> configure a
>>>>>>>>>>> simple echo server which replies to socket connections on
>>>>>>>>>>> GlassFish
>>>>>>>>>>> v3.
>>>>>>>>>>>
>>>>>>>>>>> Regards,
>>>>>>>>>>> Mohamed
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> Hi Mohamed,
>>>>>>>>>>>>
>>>>>>>>>>>>> I can't seem to find any documentation for how to configure
>>>>>>>>>>>>> grizlly
>>>>>>>>>>>>> listeners and connectors on GlassFish v3.
>>>>>>>>>>>> Currently doc team is working on that.
>>>>>>>>>>>>
>>>>>>>>>>>>> So far I can find only this page
>>>>>>>>>>>>> http://wiki.glassfish.java.net/Wiki.jsp?
>>>>>>>>>>>>> page=GrizzlyConfigOnePager,
>>>>>>>>>>>>> which
>>>>>>>>>>>>> refers to a new scheme and it's not complete yet.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Anyone can help with this please?
>>>>>>>>>>>> Do you have any specific item in mind you'd like to
>>>>>>>>>>>> configure?
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks.
>>>>>>>>>>>>
>>>>>>>>>>>> WBR,
>>>>>>>>>>>> Alexey.
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> BR,
>>>>>>>>>>>>> Mohamed
>>>>>>>>>>>>> --
>>>>>>>>>>>>> View this message in context:
>>>>>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25750048.html
>>>>>>>>>>>>> Sent from the Grizzly - Users mailing list archive at
>>>>>>>>>>>>> Nabble.com.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>> To unsubscribe, e-mail: users-
>>>>>>>>>>>>> unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>> For additional commands, e-mail: users-
>>>>>>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>> For additional commands, e-mail:
>>>>>>>>>>>> users-help_at_grizzly.dev.java.net
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> View this message in context:
>>>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25750628.html
>>>>>>>>>>> Sent from the Grizzly - Users mailing list archive at
>>>>>>>>>>> Nabble.com.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>> To unsubscribe, e-mail: users-
>>>>>>>>>>> unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>> For additional commands, e-mail: users-
>>>>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> View this message in context:
>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25752899.html
>>>>>>>>> Sent from the Grizzly - Users mailing list archive at
>>>>>>>>> Nabble.com.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>>> For additional commands, e-mail: users-
>>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> ---------------------------------------------------------------------
>>>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> --
>>>>>> View this message in context:
>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25765021.html
>>>>>> Sent from the Grizzly - Users mailing list archive at Nabble.com.
>>>>>>
>>>>>>
>>>>>> ---------------------------------------------------------------------
>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>>>
>>>>>
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>>
>>>>>
>>>>>
>>>>
>>>> --
>>>> View this message in context:
>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25766557.html
>>>> Sent from the Grizzly - Users mailing list archive at Nabble.com.
>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>
>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>
>>>
>>>
>>
>> --
>> View this message in context:
>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25767056.html
>> Sent from the Grizzly - Users mailing list archive at Nabble.com.
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>
>
>
--
View this message in context: http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25771824.html
Sent from the Grizzly - Users mailing list archive at Nabble.com.