There is a readme file in the entity-persistence-test directory
with the instructions on running unit tests.
-marina
Markus KARG wrote:
> Tom Ware wrote:
>
>>2. Update entity-persistence, entity-persistence-tests and
>>appserv-tests from CVS
>>- entity-persistence = the source for the module
>>- entity-persistence-tests = the testing module
>>- appserv-tests = the appserver's quicklook tests. They are a
>>prerequisite for check-in
>
> ok, thanks to Dinesh and you I finally have those folders on my local
> machine now and had been able to do cvs up inside of them. :-)
>
>>3. Make my changes in the entity-persistence module and compile them:
>>- maven clean
>>- maven build
>>- I assume basic maven commands are running since you say you can do a
>>full build
>
> ok (actually did not add code yet but tried out the commands only)
>
>>4. Add any tests I need to the testing module and compile them:
>>- maven clean
>>- maven build
>
> ok (actually did not add code yet but tried out the commands only)
>
>>5. Run the entity-persistence-tests
>>- Some small amount of configuration and an ant task
>>- If you get this far, let me know and I should be able to get you
>>going quite quickly
>
> So now next step would be 5.
> Can you give me instructions on how to do that, or shall I go on using
> the "Quick Test" links Dinesh provided me?
>
> Thanks a lot, you are very helpful!
> Markus
>
>>6. Request a code review (entity-persistence fixes are usually
>>reviewed by either Gordon Yorke - gyorke_at_dev.java.net or myself) Code
>>reviews requests should be sent to persistence_at_dev.java.net
>>
>>7. Run the QuickLook tests
>>- One of the Sun folks can probably help you with that better than me,
>>but if you get stuck I'll gladly tell you how I am configured
>>
>>8. Check in
>>
>>I'll gladly help you with any of these steps, just send me an email,
>>Tom
>>
>>
>>
>>Markus KARG wrote:
>>
>>
>>>Okay, stop... please. ;-)
>>>
>>>I am a beginner with Glassfish. I started using JEE 5 SDK some weeks ago
>>>and just want to contribute MaxDB compatibility. With or without
>>>clustering?! My god, how should I know?! SNAPSHOTs? Well, actually I
>>>have no clue of Maven at all. What's a SNAPSHOT good for? NO PLEASE,
>>>actually I don't care for. I just want to know how to get this thing
>>>built and running. Sorry for beeing so explicit, but in fact I just
>>>wanted to contribute one day for that MaxDB thing, and now weeks are
>>>gone...
>>>
>>>Nevertheless, thanks a lot!
>>>Markus
>>>
>>>P.S.: Once more the tip: If you want beginners to contribute to
>>>Glassfish, you should not overload them with lots of different
>>>information on several web sites. Just do one site that creates exactly
>>>one configuration. If the beginner is able to do that, provide a second
>>>page with additional features. But don't give him all information at
>>>start. That's just confusing.
>>>
>>>Dinesh Patil wrote:
>>>
>>>
>>>
>>>>Markus KARG wrote:
>>>>
>>>>
>>>>>Manfred,
>>>>>
>>>>>I followed the instructions that are to be found here:
>>>>>
>>>>>https://glassfish.dev.java.net/public/BuildGlassFish.html#Quickstart_Guide_to_Build_GlassFish_
>>>>>
>>>>>
>>>>>but as I posted to the mailing list months ago, this actually isn't
>>>>>working. Please find the actual list of error messages in the mailing
>>>>>list archive (each time I try it, maven downloads several 100MB)...
>>>>>
>>>>>
>>>>
>>>>The instructions are same, but the size of SNAPSHOT jar which is
>>>>prebuilt server image, is now about 65MB for V2 with clustering
>>>>features.. you can use "maven bootstrap-pe" for GlassFish V1 without
>>>>clustering features, this will download the image of about 50MB, these
>>>>targets will unzip the jar file to create the server image which will
>>>>be used for compiling only required modules.
>>>>
>>>>thanks
>>>>Dinesh
>>>>
>>>>
>>>>>Maybe you have other instructions than those?
>>>>>
>>>>>Markus
>>>>>
>>>>>Manfred Riem wrote:
>>>>>
>>>>>
>>>>>
>>>>>>Hi Markus,
>>>>>>
>>>>>>What is unclear about the instructions? I have successfully compiled
>>>>>>Glassfish with the instructions on the website using the commandline.
>>>>>>
>>>>>>Can you tell me which steps you have gone through?
>>>>>>
>>>>>>Kind regards,
>>>>>>Manfred Riem
>>>>>>mriem_at_manorrock.org <mailto:mriem_at_manorrock.org>
>>>>>>http://www.manorrock.org/
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> -------- Original Message --------
>>>>>> Subject: Re: Compiling Glassfish in Eclipse
>>>>>> From: Markus KARG <markus.karg_at_gmx.net>
>>>>>> Date: Thu, September 07, 2006 10:40 am
>>>>>> To: dev_at_glassfish.dev.java.net
>>>>>> Cc: persistence_at_glassfish.dev.java.net
>>>>>>
>>>>>> In fact I did not receive any response to the email below, so I
>>>>>>am as
>>>>>> far as I had been weeks ago. :-(
>>>>>>
>>>>>> Marina Vatkina wrote:
>>>>>> > Dinesh, Markus,
>>>>>> >
>>>>>> > Were you able to resolve this?
>>>>>> >
>>>>>> > thanks,
>>>>>> > -marina
>>>>>> >
>>>>>> > Markus KARG wrote On 08/31/06 10:44,:
>>>>>> > >> Dinesh,
>>>>>> >>
>>>>>> >> thank you for your kind help. It must be confusing reading the
>>>>>> thread
>>>>>> >> after all these weeks... So here once more what I have tried
>>>>>>to do.
>>>>>> >>
>>>>>> >> (1) First I tried to compile the entity-persistence module
>>>>>>only by
>>>>>> >> downloading the complete GF code from CVS. This didn't work.
>>>>>> >> (2) Then I learned about maven, so I did what the homepage
>>>>>> tells about
>>>>>> >> how to start compiling GF from scratch. This also didn't work.
>>>>>> Then I
>>>>>> >> write that one long email telling all the traps I have
>>>>>>fallen into.
>>>>>> >>
>>>>>> >> Both has nothing to do with Eclipse IDE. I tried both from the
>>>>>> command
>>>>>> >> line. Once it is possible to compile from the command line, one
>>>>>> can doe
>>>>>> >> "maven eclipse" to get an Eclipse IDE project. Since I cannot
>>>>>> compile
>>>>>> >> even at the command line, I never again tried from inside
>>>>>>the IDE.
>>>>>> >>
>>>>>> >> That's where I am.
>>>>>> >>
>>>>>> >> If you like me to test more things, tell me the *exact* steps
>>>>>> what to
>>>>>> >> do. The instructions on the web are not clear enough / are
>>>>>> faulty, as I
>>>>>> >> wrote in that one lone email.
>>>>>> >>
>>>>>> >> Markus
>>>>>> >>
>>>>>> >> Dinesh Patil wrote:
>>>>>> >>
>>>>>> >> >>> Markus,
>>>>>> >>>
>>>>>> >>> I went throught the email thread, but I didn't get the full
>>>>>> sequence
>>>>>> >>> of your build commands. In some replies to Tom, looks like you
>>>>>> try to
>>>>>> >>> build single project e.g.entity-persistence. So if that's the
>>>>>> case how
>>>>>> >>> you are getting error in admin-gui?
>>>>>> >>>
>>>>>> >>> Can you please send the steps you tried when you got this
>>>>>> compilation
>>>>>> >>> error? as this error shows the customized ant task is
>>>>>>failed to
>>>>>> >>> execute which depends on
>>>>>>admin-gui/admin-jsf/lib/ant-apt.jar file.
>>>>>> >>>
>>>>>> >>> thanks
>>>>>> >>> Dinesh
>>>>>> >>>
>>>>>> >>> Jim Driscoll wrote:
>>>>>> >>>
>>>>>> >>>
>>>>>> >>> >>>> I haven't seen a reply to this - is Markus
>>>>>>being helped?
>>>>>> >>>>
>>>>>> >>>> Jim
>>>>>> >>>>
>>>>>> >>>> Marina Vatkina wrote:
>>>>>> >>>>
>>>>>> >>>>
>>>>>> >>>> >>>>> Team,
>>>>>> >>>>>
>>>>>> >>>>> Is there anybody on the dev alias who can help Markus? :(
>>>>>> >>>>>
>>>>>> >>>>> thanks,
>>>>>> >>>>> -marina
>>>>>> >>>>>
>>>>>> >>>>> Dinesh Patil wrote On 08/22/06 17:45,:
>>>>>> >>>>>
>>>>>> >>>>>
>>>>>> >>>>> >>>>>> this is failing in admin-gui/admin-jsf
>>>>>>which uses Apt taskdef,
>>>>>> >>>>>> that's been added and executed using "exec"
>>>>>> >>>>>> <exec dir="." executable="${execute.ant}"
>>>>>> failonerror="true">
>>>>>> >>>>>> <arg line="-f aptbuild.xml
>>>>>> >>>>>> -Dglassfish.home=${glassfish.home} -lib
>>>>>>${lib.dir}/ant-apt.jar
>>>>>> >>>>>> compile" />
>>>>>> >>>>>> </exec>
>>>>>> >>>>>>
>>>>>> &
>>>>>>
>>>>>
>>>>>
>>>>>
>>>
>>>
>>>
>>
>