Marina,
OK, I see what is going on. Upon careful reading of your first email, I
see that you are facing a different issue. You need to run "clean
install" targets as opposed to "clean package."
Thanks,
Sahoo
Marina Vatkina wrote:
> Sahoo,
>
> I had your changes in the packager module :(.
>
> thanks,
> -marina
>
> Sahoo wrote:
>> Snjezana,
>>
>> I actually put back a fix for packager module last night (see svn rev
>> #23438). The same fix was required in installer and
>> distributions-prelude module and I see you have already done it.
>> Thanks for taking care of those two modules.
>>
>> Sahoo
>>
>> Snjezana Sevo-Zenzerovic wrote:
>>
>>> Marina,
>>>
>>> as the last line of Sahoo's checkin comment says, "I have not tried
>>> to build packager module." :-)
>>>
>>> I think there are two separate issues here: first one is that
>>> packager module does not build at all at this point since
>>> maven-glassfish-extension is not defined as extension in packager,
>>> distributions-prelude and installer modules. Second issue is that
>>> because of that build failure, updated packager zip file artifacts
>>> do not get published into maven repository and that's direct cause
>>> of your problem.
>>>
>>> I'll try to update affected POMs as soon as possible and make
>>> packager and other failing modules buildable...
>>>
>>> Thanks,
>>>
>>> Snjezana
>>>
>>> Marina Vatkina wrote:
>>>
>>>> Hi Sahoo,
>>>>
>>>> While I can successfully build v3_prelude_release following your
>>>> instructions, building inside v3_prelude_release/packager - 'mvn
>>>> -D<...> clean package' fails with the message below.
>>>>
>>>> thanks,
>>>> -marina
>>>>
>>>> [INFO]
>>>> ------------------------------------------------------------------------
>>>>
>>>> [ERROR] BUILD ERROR
>>>> [INFO]
>>>> ------------------------------------------------------------------------
>>>>
>>>> [INFO] Failed to resolve artifact.
>>>>
>>>> Missing:
>>>> ----------
>>>> 1) org.glassfish.packager:felix:zip:3.0-Prelude-SNAPSHOT
>>>>
>>>> Try downloading the file manually from the project website.
>>>>
>>>> Then, install it using the command:
>>>> mvn install:install-file -DgroupId=org.glassfish.packager
>>>> -DartifactId=felix \
>>>> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip -Dfile=/path/to/file
>>>> Alternatively, if you host your own repository you can deploy the
>>>> file there: mvn deploy:deploy-file -DgroupId=org.glassfish.packager
>>>> -DartifactId=felix \
>>>> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip -Dfile=/path/to/file \
>>>> -Durl=[url] -DrepositoryId=[id]
>>>>
>>>> Path to dependency:
>>>> 1)
>>>> org.glassfish.packager:glassfish-api:distribution-base-zip:3.0-Prelude-SNAPSHOT
>>>>
>>>> 2) org.glassfish.packager:felix:zip:3.0-Prelude-SNAPSHOT
>>>>
>>>> 2) org.glassfish.packager:glassfish-hk2:zip:3.0-Prelude-SNAPSHOT
>>>>
>>>> Try downloading the file manually from the project website.
>>>>
>>>> Then, install it using the command:
>>>> mvn install:install-file -DgroupId=org.glassfish.packager
>>>> -DartifactId=glassfish-hk2 \
>>>> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip -Dfile=/path/to/file
>>>> Alternatively, if you host your own repository you can deploy the
>>>> file there: mvn deploy:deploy-file -DgroupId=org.glassfish.packager
>>>> -DartifactId=glassfish-hk2 \
>>>> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip -Dfile=/path/to/file \
>>>> -Durl=[url] -DrepositoryId=[id]
>>>>
>>>> Path to dependency:
>>>> 1)
>>>> org.glassfish.packager:glassfish-api:distribution-base-zip:3.0-Prelude-SNAPSHOT
>>>>
>>>> 2) org.glassfish.packager:glassfish-hk2:zip:3.0-Prelude-SNAPSHOT
>>>>
>>>> 3) org.glassfish.packager:glassfish-grizzly:zip:3.0-Prelude-SNAPSHOT
>>>>
>>>> Try downloading the file manually from the project website.
>>>>
>>>> Then, install it using the command:
>>>> mvn install:install-file -DgroupId=org.glassfish.packager
>>>> -DartifactId=glassfish-grizzly \
>>>> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip -Dfile=/path/to/file
>>>> Alternatively, if you host your own repository you can deploy the
>>>> file there: mvn deploy:deploy-file -DgroupId=org.glassfish.packager
>>>> -DartifactId=glassfish-grizzly \
>>>> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip -Dfile=/path/to/file \
>>>> -Durl=[url] -DrepositoryId=[id]
>>>>
>>>> Path to dependency:
>>>> 1)
>>>> org.glassfish.packager:glassfish-api:distribution-base-zip:3.0-Prelude-SNAPSHOT
>>>>
>>>> 2) org.glassfish.packager:glassfish-grizzly:zip:3.0-Prelude-SNAPSHOT
>>>>
>>>> ----------
>>>> 3 required artifacts are missing.
>>>>
>>>> for artifact:
>>>> org.glassfish.packager:glassfish-api:distribution-base-zip:3.0-Prelude-SNAPSHOT
>>>>
>>>>
>>>> from the specified remote repositories:
>>>> central (http://repo1.maven.org/maven2),
>>>> maven2.java.net (http://download.java.net/maven/2),
>>>> repo1.maven.org (http://repo1.maven.org/maven2),
>>>> java-dev-repository
>>>> (https://maven-repository.dev.java.net/nonav/repository),
>>>> glassfish-repository (http://download.java.net/maven/glassfish),
>>>> java.net (http://download.java.net/maven/1),
>>>> maven2.java.net-backup
>>>> (https://maven2-repository.dev.java.net/nonav/repository),
>>>> glassfish-repository-wsinterop (http://maven.dyndns.org/glassfish/)
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Sahoo wrote:
>>>>
>>>>> After my recent check in [1], when you update your workspace and
>>>>> do a build, you are likely to see maven complaining about missing
>>>>> artifact called
>>>>> /org.glassfish.build:maven-glassfish-extension:jar:3.0-Prelude-SNAPSHOT./
>>>>> To avoid this, run the following command:
>>>>> 'mvn -Prelease-phase1 install' in your workspace.
>>>>>
>>>>> More about the problem and solution:
>>>>> The reason for this error is obvious: build depends on an artifact
>>>>> which is not available in remote repo. But, you may have noticed
>>>>> that v3 build itself produces that artifact (see
>>>>> build/maven-glassfish-extension/pom.xml). Why then maven complains
>>>>> instead of building the artifact locally and using the same like
>>>>> every other build dependency? Even though that artifact is
>>>>> produced by v3 build, maven can't get there as it is a build
>>>>> extension that maven needs to resolve at a very early stage of
>>>>> release. So, we have introduced a separate profile called
>>>>> /release-phase1/ which only builds this artifact. To invoke maven
>>>>> in this profile, pass -Prelease-phase1 in command line.
>>>>>
>>>>> We are asking RE to publish 3.0-Prelude-SNAPSHOT artifacts to
>>>>> remote repo so that everyone does not run into this problem.
>>>>>
>>>>> Thanks,
>>>>> Sahoo
>>>>>
>>>>> [1]
>>>>> http://fisheye4.atlassian.com/changelog/glassfish-svn/branches?cs=23437
>>>>>
>>>>>
>>>>> ------------------------------------------------------------------------
>>>>>
>>>>>
>>>>> Subject:
>>>>> [GFv3] HEADS UP: version to be updated to 3.0-Prelude and 3.0 in
>>>>> branch and trunk resp.
>>>>> From:
>>>>> Sahoo <sahoo_at_Sun.COM>
>>>>> Date:
>>>>> Wed, 15 Oct 2008 20:10:32 +0530
>>>>> To:
>>>>> dev_at_glassfish.dev.java.net
>>>>>
>>>>> To:
>>>>> dev_at_glassfish.dev.java.net
>>>>>
>>>>>
>>>>> To avoid confusion, we have decided to use version numbers in
>>>>> pom.xmls same as what release we are preparing. So, we will set
>>>>> the version as 3.0-Prelude-SNAPSHOT in prelude branch and
>>>>> 3.0-SNAPSHOT in trunk. When the final release is performed,
>>>>> SNAPSHOT will be dropped. I am in the process of making the
>>>>> change, so I request you not to make major changes to pom.xmls at
>>>>> this point of time.
>>>>>
>>>>> Thanks,
>>>>> Sahoo
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: dev-unsubscribe_at_glassfish.dev.java.net
>>>>> For additional commands, e-mail: dev-help_at_glassfish.dev.java.net
>>>>>
>>>>>
>>>>>
>>>>> ------------------------------------------------------------------------
>>>>>
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: dev-unsubscribe_at_glassfish.dev.java.net
>>>>> For additional commands, e-mail: dev-help_at_glassfish.dev.java.net
>>>>
>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: dev-unsubscribe_at_glassfish.dev.java.net
>>>> For additional commands, e-mail: dev-help_at_glassfish.dev.java.net
>>>>
>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: dev-unsubscribe_at_glassfish.dev.java.net
>>> For additional commands, e-mail: dev-help_at_glassfish.dev.java.net
>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: dev-unsubscribe_at_glassfish.dev.java.net
>> For additional commands, e-mail: dev-help_at_glassfish.dev.java.net
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe_at_glassfish.dev.java.net
> For additional commands, e-mail: dev-help_at_glassfish.dev.java.net
>