Sahoo,
I had your changes in the packager module :(.
thanks,
-marina
Sahoo wrote:
> Snjezana,
>
> I actually put back a fix for packager module last night (see svn rev
> #23438). The same fix was required in installer and
> distributions-prelude module and I see you have already done it. Thanks
> for taking care of those two modules.
>
> Sahoo
>
> Snjezana Sevo-Zenzerovic wrote:
>
>> Marina,
>>
>> as the last line of Sahoo's checkin comment says, "I have not tried to
>> build packager module." :-)
>>
>> I think there are two separate issues here: first one is that packager
>> module does not build at all at this point since
>> maven-glassfish-extension is not defined as extension in packager,
>> distributions-prelude and installer modules. Second issue is that
>> because of that build failure, updated packager zip file artifacts do
>> not get published into maven repository and that's direct cause of
>> your problem.
>>
>> I'll try to update affected POMs as soon as possible and make packager
>> and other failing modules buildable...
>>
>> Thanks,
>>
>> Snjezana
>>
>> Marina Vatkina wrote:
>>
>>> Hi Sahoo,
>>>
>>> While I can successfully build v3_prelude_release following your
>>> instructions, building inside v3_prelude_release/packager - 'mvn
>>> -D<...> clean package' fails with the message below.
>>>
>>> thanks,
>>> -marina
>>>
>>> [INFO]
>>> ------------------------------------------------------------------------
>>> [ERROR] BUILD ERROR
>>> [INFO]
>>> ------------------------------------------------------------------------
>>> [INFO] Failed to resolve artifact.
>>>
>>> Missing:
>>> ----------
>>> 1) org.glassfish.packager:felix:zip:3.0-Prelude-SNAPSHOT
>>>
>>> Try downloading the file manually from the project website.
>>>
>>> Then, install it using the command:
>>> mvn install:install-file -DgroupId=org.glassfish.packager
>>> -DartifactId=felix \
>>> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip
>>> -Dfile=/path/to/file
>>> Alternatively, if you host your own repository you can deploy the
>>> file there: mvn deploy:deploy-file
>>> -DgroupId=org.glassfish.packager -DartifactId=felix \
>>> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip
>>> -Dfile=/path/to/file \
>>> -Durl=[url] -DrepositoryId=[id]
>>>
>>> Path to dependency:
>>> 1)
>>> org.glassfish.packager:glassfish-api:distribution-base-zip:3.0-Prelude-SNAPSHOT
>>>
>>> 2) org.glassfish.packager:felix:zip:3.0-Prelude-SNAPSHOT
>>>
>>> 2) org.glassfish.packager:glassfish-hk2:zip:3.0-Prelude-SNAPSHOT
>>>
>>> Try downloading the file manually from the project website.
>>>
>>> Then, install it using the command:
>>> mvn install:install-file -DgroupId=org.glassfish.packager
>>> -DartifactId=glassfish-hk2 \
>>> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip
>>> -Dfile=/path/to/file
>>> Alternatively, if you host your own repository you can deploy the
>>> file there: mvn deploy:deploy-file
>>> -DgroupId=org.glassfish.packager -DartifactId=glassfish-hk2 \
>>> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip
>>> -Dfile=/path/to/file \
>>> -Durl=[url] -DrepositoryId=[id]
>>>
>>> Path to dependency:
>>> 1)
>>> org.glassfish.packager:glassfish-api:distribution-base-zip:3.0-Prelude-SNAPSHOT
>>>
>>> 2) org.glassfish.packager:glassfish-hk2:zip:3.0-Prelude-SNAPSHOT
>>>
>>> 3) org.glassfish.packager:glassfish-grizzly:zip:3.0-Prelude-SNAPSHOT
>>>
>>> Try downloading the file manually from the project website.
>>>
>>> Then, install it using the command:
>>> mvn install:install-file -DgroupId=org.glassfish.packager
>>> -DartifactId=glassfish-grizzly \
>>> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip
>>> -Dfile=/path/to/file
>>> Alternatively, if you host your own repository you can deploy the
>>> file there: mvn deploy:deploy-file
>>> -DgroupId=org.glassfish.packager -DartifactId=glassfish-grizzly \
>>> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip
>>> -Dfile=/path/to/file \
>>> -Durl=[url] -DrepositoryId=[id]
>>>
>>> Path to dependency:
>>> 1)
>>> org.glassfish.packager:glassfish-api:distribution-base-zip:3.0-Prelude-SNAPSHOT
>>>
>>> 2)
>>> org.glassfish.packager:glassfish-grizzly:zip:3.0-Prelude-SNAPSHOT
>>>
>>> ----------
>>> 3 required artifacts are missing.
>>>
>>> for artifact:
>>>
>>> org.glassfish.packager:glassfish-api:distribution-base-zip:3.0-Prelude-SNAPSHOT
>>>
>>>
>>> from the specified remote repositories:
>>> central (http://repo1.maven.org/maven2),
>>> maven2.java.net (http://download.java.net/maven/2),
>>> repo1.maven.org (http://repo1.maven.org/maven2),
>>> java-dev-repository
>>> (https://maven-repository.dev.java.net/nonav/repository),
>>> glassfish-repository (http://download.java.net/maven/glassfish),
>>> java.net (http://download.java.net/maven/1),
>>> maven2.java.net-backup
>>> (https://maven2-repository.dev.java.net/nonav/repository),
>>> glassfish-repository-wsinterop (http://maven.dyndns.org/glassfish/)
>>>
>>>
>>>
>>>
>>>
>>> Sahoo wrote:
>>>
>>>> After my recent check in [1], when you update your workspace and do
>>>> a build, you are likely to see maven complaining about missing
>>>> artifact called
>>>> /org.glassfish.build:maven-glassfish-extension:jar:3.0-Prelude-SNAPSHOT./
>>>> To avoid this, run the following command:
>>>> 'mvn -Prelease-phase1 install' in your workspace.
>>>>
>>>> More about the problem and solution:
>>>> The reason for this error is obvious: build depends on an artifact
>>>> which is not available in remote repo. But, you may have noticed
>>>> that v3 build itself produces that artifact (see
>>>> build/maven-glassfish-extension/pom.xml). Why then maven complains
>>>> instead of building the artifact locally and using the same like
>>>> every other build dependency? Even though that artifact is produced
>>>> by v3 build, maven can't get there as it is a build extension that
>>>> maven needs to resolve at a very early stage of release. So, we have
>>>> introduced a separate profile called /release-phase1/ which only
>>>> builds this artifact. To invoke maven in this profile, pass
>>>> -Prelease-phase1 in command line.
>>>>
>>>> We are asking RE to publish 3.0-Prelude-SNAPSHOT artifacts to remote
>>>> repo so that everyone does not run into this problem.
>>>>
>>>> Thanks,
>>>> Sahoo
>>>>
>>>> [1]
>>>> http://fisheye4.atlassian.com/changelog/glassfish-svn/branches?cs=23437
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>>
>>>> Subject:
>>>> [GFv3] HEADS UP: version to be updated to 3.0-Prelude and 3.0 in
>>>> branch and trunk resp.
>>>> From:
>>>> Sahoo <sahoo_at_Sun.COM>
>>>> Date:
>>>> Wed, 15 Oct 2008 20:10:32 +0530
>>>> To:
>>>> dev_at_glassfish.dev.java.net
>>>>
>>>> To:
>>>> dev_at_glassfish.dev.java.net
>>>>
>>>>
>>>> To avoid confusion, we have decided to use version numbers in
>>>> pom.xmls same as what release we are preparing. So, we will set the
>>>> version as 3.0-Prelude-SNAPSHOT in prelude branch and 3.0-SNAPSHOT
>>>> in trunk. When the final release is performed, SNAPSHOT will be
>>>> dropped. I am in the process of making the change, so I request you
>>>> not to make major changes to pom.xmls at this point of time.
>>>>
>>>> Thanks,
>>>> Sahoo
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: dev-unsubscribe_at_glassfish.dev.java.net
>>>> For additional commands, e-mail: dev-help_at_glassfish.dev.java.net
>>>>
>>>>
>>>>
>>>> ------------------------------------------------------------------------
>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: dev-unsubscribe_at_glassfish.dev.java.net
>>>> For additional commands, e-mail: dev-help_at_glassfish.dev.java.net
>>>
>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: dev-unsubscribe_at_glassfish.dev.java.net
>>> For additional commands, e-mail: dev-help_at_glassfish.dev.java.net
>>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: dev-unsubscribe_at_glassfish.dev.java.net
>> For additional commands, e-mail: dev-help_at_glassfish.dev.java.net
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe_at_glassfish.dev.java.net
> For additional commands, e-mail: dev-help_at_glassfish.dev.java.net
>