Marina,
as the last line of Sahoo's checkin comment says, "I have not tried to
build packager module." :-)
I think there are two separate issues here: first one is that packager
module does not build at all at this point since
maven-glassfish-extension is not defined as extension in packager,
distributions-prelude and installer modules. Second issue is that
because of that build failure, updated packager zip file artifacts do
not get published into maven repository and that's direct cause of your
problem.
I'll try to update affected POMs as soon as possible and make packager
and other failing modules buildable...
Thanks,
Snjezana
Marina Vatkina wrote:
> Hi Sahoo,
>
> While I can successfully build v3_prelude_release following your
> instructions, building inside v3_prelude_release/packager - 'mvn
> -D<...> clean package' fails with the message below.
>
> thanks,
> -marina
>
> [INFO]
> ------------------------------------------------------------------------
> [ERROR] BUILD ERROR
> [INFO]
> ------------------------------------------------------------------------
> [INFO] Failed to resolve artifact.
>
> Missing:
> ----------
> 1) org.glassfish.packager:felix:zip:3.0-Prelude-SNAPSHOT
>
> Try downloading the file manually from the project website.
>
> Then, install it using the command:
> mvn install:install-file -DgroupId=org.glassfish.packager
> -DartifactId=felix \
> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip
> -Dfile=/path/to/file
> Alternatively, if you host your own repository you can deploy the file
> there: mvn deploy:deploy-file -DgroupId=org.glassfish.packager
> -DartifactId=felix \
> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip
> -Dfile=/path/to/file \
> -Durl=[url] -DrepositoryId=[id]
>
> Path to dependency:
> 1)
> org.glassfish.packager:glassfish-api:distribution-base-zip:3.0-Prelude-SNAPSHOT
>
> 2) org.glassfish.packager:felix:zip:3.0-Prelude-SNAPSHOT
>
> 2) org.glassfish.packager:glassfish-hk2:zip:3.0-Prelude-SNAPSHOT
>
> Try downloading the file manually from the project website.
>
> Then, install it using the command:
> mvn install:install-file -DgroupId=org.glassfish.packager
> -DartifactId=glassfish-hk2 \
> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip
> -Dfile=/path/to/file
> Alternatively, if you host your own repository you can deploy the file
> there: mvn deploy:deploy-file -DgroupId=org.glassfish.packager
> -DartifactId=glassfish-hk2 \
> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip
> -Dfile=/path/to/file \
> -Durl=[url] -DrepositoryId=[id]
>
> Path to dependency:
> 1)
> org.glassfish.packager:glassfish-api:distribution-base-zip:3.0-Prelude-SNAPSHOT
>
> 2) org.glassfish.packager:glassfish-hk2:zip:3.0-Prelude-SNAPSHOT
>
> 3) org.glassfish.packager:glassfish-grizzly:zip:3.0-Prelude-SNAPSHOT
>
> Try downloading the file manually from the project website.
>
> Then, install it using the command:
> mvn install:install-file -DgroupId=org.glassfish.packager
> -DartifactId=glassfish-grizzly \
> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip
> -Dfile=/path/to/file
> Alternatively, if you host your own repository you can deploy the file
> there: mvn deploy:deploy-file -DgroupId=org.glassfish.packager
> -DartifactId=glassfish-grizzly \
> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip
> -Dfile=/path/to/file \
> -Durl=[url] -DrepositoryId=[id]
>
> Path to dependency:
> 1)
> org.glassfish.packager:glassfish-api:distribution-base-zip:3.0-Prelude-SNAPSHOT
>
> 2)
> org.glassfish.packager:glassfish-grizzly:zip:3.0-Prelude-SNAPSHOT
>
> ----------
> 3 required artifacts are missing.
>
> for artifact:
>
> org.glassfish.packager:glassfish-api:distribution-base-zip:3.0-Prelude-SNAPSHOT
>
>
> from the specified remote repositories:
> central (http://repo1.maven.org/maven2),
> maven2.java.net (http://download.java.net/maven/2),
> repo1.maven.org (http://repo1.maven.org/maven2),
> java-dev-repository
> (https://maven-repository.dev.java.net/nonav/repository),
> glassfish-repository (http://download.java.net/maven/glassfish),
> java.net (http://download.java.net/maven/1),
> maven2.java.net-backup
> (https://maven2-repository.dev.java.net/nonav/repository),
> glassfish-repository-wsinterop (http://maven.dyndns.org/glassfish/)
>
>
>
>
>
> Sahoo wrote:
>
>> After my recent check in [1], when you update your workspace and do a
>> build, you are likely to see maven complaining about missing artifact
>> called
>> /org.glassfish.build:maven-glassfish-extension:jar:3.0-Prelude-SNAPSHOT./
>> To avoid this, run the following command:
>> 'mvn -Prelease-phase1 install' in your workspace.
>>
>> More about the problem and solution:
>> The reason for this error is obvious: build depends on an artifact
>> which is not available in remote repo. But, you may have noticed that
>> v3 build itself produces that artifact (see
>> build/maven-glassfish-extension/pom.xml). Why then maven complains
>> instead of building the artifact locally and using the same like
>> every other build dependency? Even though that artifact is produced
>> by v3 build, maven can't get there as it is a build extension that
>> maven needs to resolve at a very early stage of release. So, we have
>> introduced a separate profile called /release-phase1/ which only
>> builds this artifact. To invoke maven in this profile, pass
>> -Prelease-phase1 in command line.
>>
>> We are asking RE to publish 3.0-Prelude-SNAPSHOT artifacts to remote
>> repo so that everyone does not run into this problem.
>>
>> Thanks,
>> Sahoo
>>
>> [1]
>> http://fisheye4.atlassian.com/changelog/glassfish-svn/branches?cs=23437
>>
>> ------------------------------------------------------------------------
>>
>> Subject:
>> [GFv3] HEADS UP: version to be updated to 3.0-Prelude and 3.0 in
>> branch and trunk resp.
>> From:
>> Sahoo <sahoo_at_Sun.COM>
>> Date:
>> Wed, 15 Oct 2008 20:10:32 +0530
>> To:
>> dev_at_glassfish.dev.java.net
>>
>> To:
>> dev_at_glassfish.dev.java.net
>>
>>
>> To avoid confusion, we have decided to use version numbers in
>> pom.xmls same as what release we are preparing. So, we will set the
>> version as 3.0-Prelude-SNAPSHOT in prelude branch and 3.0-SNAPSHOT in
>> trunk. When the final release is performed, SNAPSHOT will be dropped.
>> I am in the process of making the change, so I request you not to
>> make major changes to pom.xmls at this point of time.
>>
>> Thanks,
>> Sahoo
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: dev-unsubscribe_at_glassfish.dev.java.net
>> For additional commands, e-mail: dev-help_at_glassfish.dev.java.net
>>
>>
>>
>> ------------------------------------------------------------------------
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: dev-unsubscribe_at_glassfish.dev.java.net
>> For additional commands, e-mail: dev-help_at_glassfish.dev.java.net
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe_at_glassfish.dev.java.net
> For additional commands, e-mail: dev-help_at_glassfish.dev.java.net
>