Oracle® Database

1 Reviewing Information About This Guide

This guide describes how to install Oracle Database by using the default installation options.

Tasks Described in This Guide

The procedures in this guide describe how to:

• Configure your system to support Oracle Database

• Install Oracle Database on a local file system by using the Basic Installation option

• Configure a general-purpose Oracle Database installation that uses the local file system for database file storage

Results of a Successful Installation

After you successfully install Oracle Database:

• The database that you created and the default Oracle Net listener process run on the system.

• Oracle Enterprise Manager Database Control run on the system and can be accessed by using a Web browser.

Tasks Not Described in This Guide

This guide covers the Basic Installation scenario and does not describe how to complete the following tasks:

• Using the Advanced Installation option to install the software

• Installing the software on a system that has an existing Oracle software installation

• Installing Oracle Clusterware and Oracle Real Application Clusters on a cluster

• Enabling Enterprise Manager e-mail notifications or automated backups

• Using alternative storage options such as Automatic Storage Management

Where to Get Additional Installation Information

For more information about installing Oracle Database, including information about the tasks not described in this guide, refer to one of the following guides:

• To install the software on a single system, then refer to Oracle Database Installation Guide for HP-UX.

• To perform a Oracle Real Application Clusters installation, then refer to Oracle Clusterware Installation Guide for HP-UX and Oracle Real Application Clusters Installation Guide for HP-UX. These guides describe how to install Oracle Clusterware and Oracle Real Application Clusters. Oracle clusterware is a prerequisite for Oracle Real Application Clusters installations.

All these guides are available on the product disc. To access them, use a Web browser to open the welcome.htm file located in the top-level directory of the installation media, and then select the Documentation tab.

2 Logging In to the System as root

Before you install the Oracle software, you must complete several tasks as the root user. To log in as the root user, complete one of the following procedures:

• Following are the steps for installing the software from an X Window System workstation or X terminal:

  1. Start a local terminal session, for example, an X terminal (xterm).

  2. If you are not installing the software on the local system, then enter the following command to enable the remote host to display X applications on the local X server:

     $ xhost fully_qualified_remote_host_name
     

     For example:

     $ xhost somehost.us.example.com
     

  3. If you are not installing the software on the local system, then use the ssh, rlogin, or telnet command to connect to the system where you want to install the software:

     $ telnet fully_qualified_remote_host_name
     

  4. If you are not logged in as the root user, then enter the following command to switch user to root:

     $ su -
     password:
     #
     

• Following are the steps for installing the software from a PC or other system with X server software:

  Note:

  If necessary, refer to your X server documentation for more information about completing this procedure. Depending on the X server software that you are using, you must complete the tasks in a different order.

  1. Start the X server software.

  2. Configure the security settings of the X server software to permit remote hosts to display X applications on the local system.

  3. Connect to the remote system where you want to install the software and start a terminal session on that system, for example, an X terminal (xterm).

  4. If you are not logged in as the root user on the remote system, then enter the following command to switch user to root:

     $ su -
     password:
     #
     

3 Checking the Hardware Requirements

The system must meet the following minimum hardware requirements:

• Memory Requirements

• System Architecture

• Disk Space Requirements

# /usr/sbin/swapinfo -a

# /bin/getconf KERNEL_BITS

4 Checking the Software Requirements

Depending on the products that you intend to install, verify that the following software are installed on the system.

• Operating System Requirements

• Compiler Requirements

• Patch Requirement

• Additional Software Requirements

# uname -a

HP-UX hostname B.11.23 ia64 109444686 unlimited-user license

# /usr/sbin/swlist -l level | more

# /usr/sbin/swlist -l patch | grep PHSS_28880

# /usr/sbin/swlist -l patch | more

http://itresourcecenter.hp.com

5 Creating Required Operating System Groups and Users

The following local operating system groups and users are required if you are installing Oracle Database:

• The Oracle Inventory group (oinstall)

• The OSDBA group (dba)

• The Oracle software owner (oracle)

To determine whether these groups and users already exist, and if necessary, to create them, follow these steps:

1. To determine whether the oinstall group exists, enter the following command:

   # more /var/opt/oracle/oraInst.loc
   

   If the output of this command shows the oinstall group name, then the group already exists.

   Note:

   In Oracle documentation, Oracle Inventory group is called oinstall. However, it is not mandatory to use the same name, you can enter a different name for the group.

   If the oraInst.loc file exists, then the output from this command is similar to the following:

   inventory_loc=/u01/app/oraInventory
   inst_group=oinstall
   

   The inst_group parameter shows the name of the Oracle Inventory group, for example oinstall.

2. To determine whether the dba group exists, enter the following command:

   # grep dba /etc/group
   

   If the output from this commands shows the dba group name, then the group already exists.

3. If necessary, enter the following commands to create the oinstall and dba groups:

   # /usr/sbin/groupadd oinstall
   # /usr/sbin/groupadd dba
   

4. To determine whether the oracle user exists and belongs to the correct groups, enter the following command:

   # id oracle
   

   If the oracle user exists, then this command displays information about the groups to which the user belongs. The output should be similar to the following, indicating that oinstall is the primary group and dba is a secondary group:

   uid=440(oracle) gid=200(oinstall) groups=201(dba),202(oper)
   

5. If necessary, complete one of the following actions:

   • If the oracle user exists, but its primary group is not oinstall or it is not a member of the dba group, then enter the following command:

     # /usr/sbin/usermod -g oinstall -G dba oracle
     

   • If the oracle user does not exist, enter the following command to create it:

     # /usr/sbin/useradd -g oinstall -G dba oracle
     

     This command creates the oracle user and specifies oinstall as the primary group and dba as the secondary group.

   Note:

   In Oracle documentation, Oracle Inventory group is called oinstall. However, it is not mandatory to use the same name, you can enter a different name for the group.

6. Enter the following command to set the password of the oracle user:

   # passwd oracle
   

6 Configure Kernel Parameters

Verify that the kernel parameters shown in the following table are set either to the formula shown, or to values greater than or equal to the recommended value shown. The procedure following the table describes how to verify and set the values.

To display the current value or formula specified for these kernel parameters, and to change them if necessary:

1. Enter the following command to start the kcweb application:

   # /usr/sbin/kcweb -F
   

2. Check the value or formula specified for each of these parameters and, if necessary, modify that value or formula.

   If necessary, refer to the kcweb online Help for more information about completing this step.

   Note:

   If you modify the value of a parameter that is not dynamic, then you must restart the system.

7 Creating Required Directories

Create directories with names similar to the following, and specify the correct owner, group, and permissions for them:

• The Oracle base directory

• An optional Oracle data file directory

The Oracle base directory must have 3 GB of free disk space, or 4 GB of free disk space if you choose not to create a separate Oracle data file directory.

To create the Oracle base directory:

1. Enter the following command to display information about all mounted file systems:

   # bdf
   

   This command displays information about all the file systems mounted on the system, including:

   • The physical device name

   • The total amount, used amount, and available amount of disk space

   • The mount point directory for that file system

2. From the display, identify either one or two file systems that meet the disk space requirements mentioned earlier in this section.

3. Note the name of the mount point directory for each file system that you identified.

4. Enter commands similar to the following to create the recommended subdirectories in the mount point directory that you identified and set the appropriate owner, group, and permissions on them:

   # mkdir /mount_point/oradata
   # chown oracle:oinstall /mount_point/oradata
   # chmod 775 /mount_point/oradata
   

8 Configuring the oracle User's Environment

You run Oracle Universal Installer from the oracle account. However, before you start Oracle Universal Installer, you must configure the environment of the oracle user. To configure the environment, you must:

• Set the default file mode creation mask (umask) to 022 in the shell startup file.

• Set the DISPLAY environment variable.

To set the oracle user's environment:

1. Start a new terminal session, for example, an X terminal (xterm).

2. Enter the following command to ensure that X Window applications can display on this system:

   $ xhost fully_qualified_remote_host_name
   

   For example:

   $ xhost somehost.us.example.com
   

3. Complete one of the following steps:

   • If the terminal session is not connected to the system where you want to install the software, then log in to that system as the oracle user.

   • If the terminal session is connected to the system where you want to install the software, then switch user to oracle:

     $ su - oracle
     

4. To determine the default shell for the oracle user, enter the following command:

   $ echo $SHELL
   

5. Open the oracle user's shell startup file in any text editor:

   • Bash shell (bash):

     $ vi .profile
     

   • Bourne shell (sh), Bash shell (bash), or Korn shell (ksh):

     $ vi .bash_profile
     

   • C shell (csh or tcsh):

     % vi .login
     

6. Enter or edit the following line in the shell startup file, specifying a value of 022 for the default file mode creation mask:

   umask 022
   

7. If the ORACLE_SID, ORACLE_HOME, or ORACLE_BASE environment variable is set in the file, then remove the corresponding lines from the file.

8. Save the file, and exit from the editor.

9. To run the shell startup script, enter the following command:

   • Bash shell on Red Hat:

     $ . ./.bash_profile
     

   • Bourne shell, Bash shell, or Korn shell:

     $ . ./.profile
     

   • C shell:

     % source ./.login
     

10. If you are not installing the software on the local computer, then run the following command on the remote computer to set the DISPLAY variable:

    • Bourne, Bash or Korn shell:

      $ export DISPLAY=local_host:0.0      
      

    • C shell:

      % setenv DISPLAY local_host:0.0
      

    In this example, local_host is the host name or IP address of the local computer that you want to use to display Oracle Universal Installer.

    Run the following command on the remote computer to check if the shell and the DISPLAY environmental variable are set correctly:

    echo $SHELL
    echo $DISPLAY
    

    Now to enable X applications, run the following commands on the local computer:

    $ xhost + fully_qualified_remote_host_name
    

    To verify that X applications display is set properly, run a X11 based program that comes with the operating system such as xclock:

    $ xclock_path
    

    In this example, xclock_path is the directory path. For example, you can find xclock at /usr/X11R6/bin/xclocks. If the DISPLAY variable is set properly, then you can see xclock on your computer screen.

    See Also:

    PC-X Server or Operating System vendor documents for further assistance.

11. If you determined that the /tmp directory had insufficient free disk space when checking the hardware requirements, then identify a file system with the required amount of free space and set the TMP and TMPDIR environment variables as follows:

    1. Use the df -k command to identify a suitable file system with sufficient free space.

    2. If necessary, enter commands similar to the following to create a temporary directory on the file system that you identified, and set the appropriate permissions on the directory:

       # sudo mkdir /mount_point/tmp
       # sudo chmod a+wr /mount_point/tmp
       # exit
       

    3. Enter commands similar to the following to set the TMP and TMPDIR environment variables:

       Bourne, Bash, or Korn shell:

       $ TMP=/mount_point/tmp
       $ TMPDIR=/mount_point/tmp
       $ export TMP TMPDIR
       

       C shell:

       % setenv TMP /mount_point/tmp
       % setenv TMPDIR /mount_point/tmp
       

12. Enter commands similar to the following to set the ORACLE_BASE and ORACLE_SID environment variables:

    • Bourne, Bash, or Korn shell:

      $ ORACLE_BASE=/u01/app/oracle
      $ ORACLE_SID=sales
      $ export ORACLE_BASE ORACLE_SID
      

    • C shell:

      % setenv ORACLE_BASE /u01/app/oracle
      % setenv ORACLE_SID sales
      

    In these examples, /u01/app/oracle is the Oracle base directory that you created or identified earlier and sales is the name that you want to call the database (typically no more than five characters).

13. Enter the following commands to ensure that the ORACLE_HOME and TNS_ADMIN environment variables are not set:

    Bourne, Bash, or Korn shell:

    $ unset ORACLE_HOME
    $ unset TNS_ADMIN
    

    C shell:

    % unsetenv ORACLE_HOME
    % unsetenv TNS_ADMIN
    

14. To verify that the environment has been set correctly, enter the following commands:

    $ umask
    $ env | more
    

    Verify that the umask command displays a value of 22, 022, or 0022 and the environment variables that you set in this section have the correct values.

9 Mounting the Product Disc

On most HP-UX on Itanium systems, the product disc mounts automatically when you insert it into the drive. If the disc does not mount automatically, then follow these steps to mount it:

1. Switch user to root:

   $ su -
   password
   #
   

2. If necessary, enter the following command to unmount the currently mounted disc, then remove it from the drive:

   # /usr/sbin/umount /SD_DVD
   

   In this example, /SD_DVD is the mount point directory for the disc drive.

3. Insert the appropriate disc into the disc drive, then enter a command similar to the following to mount it:

   # /usr/sbin/mount -F cdfs -o rr /dev/dsk/cxtydz /SD_DVD
   

   In this example, /SD_DVD is the disc mount point directory and /dev/dsk/cxtydz is the device name for the disc device, for example /dev/dsk/c0t2d0.

4. If Oracle Universal Installer is displaying the Disk Location dialog box, enter the disc mount point directory path, for example:

   /SD_DVD
   

10 Installing Oracle Database

After configuring the oracle user's environment, start Oracle Universal Installer and install Oracle Database as follows:

1. To start Oracle Universal Installer, enter the following command:

   $ /mount_point/db/runInstaller
   

   If Oracle Universal Installer does not start, then refer to Oracle Database Installation Guide for Linux for information about how to troubleshoot X Window display problems.

2. The following table describes the recommended action for each Oracle Universal Installer screen. Use the following guidelines to complete the installation:

   • If you need more assistance, or to choose an option that is not a default, then click Help for additional information.

   • If you encounter errors while installing or linking the software, then refer to Oracle Database Installation Guide for Linux for information about troubleshooting.

   Note:

   • If you have completed the tasks listed previously, then you can complete the installation by choosing the default values on most screens.

   • In Oracle documentation, Oracle Inventory group is called oinstall. However, it is not mandatory to use the same name, you can enter a different name for the group.

   Screen	Recommended Action
   Select a Product to Install	This screen enables you to install any one for the following products: Oracle Database 11g Oracle Client Oracle Clusterware Click Next.
   Select Installation Method	The Basic Installation option is selected by default. Specify the directory path of the Oracle home. Ensure that the oinstall group is selected. To create a starter database, then specify a name and password for it. Then, click Next.
   Specify Inventory Directory and Credentials	This screen is displayed only during the first installation of Oracle products on a system. Specify the full path of the Oracle Inventory directory. Ensure that the operating system group selected is oinstall. Then, click Next.
   Product-Specific Prerequisite Checks	Verify that all of the prerequisite checks succeed, and then click Next. Oracle Universal Installer checks the system to verify that it is configured correctly to run Oracle software. If you have completed all of the preinstallation steps in this guide, all of the checks should pass. If a check fails, then review the cause of the failure listed for that check on the screen. If possible, rectify the problem and rerun the check. Alternatively, if you are satisfied that your system meets the requirements, then you can select the check box for the failed check to manually verify the requirement.
   Oracle Configuration Manager	Enter the Customer Identification Number, My Oracle Support (formerly OracleMetalink) User Name, Country code, and Click Next. The new screen prompts you to accept the license agreement. Click Accept license Agreement to accept the agreement. If you decline this agreement, then Oracle Configuration Manager is installed but not configured.
   Summary	Review the information displayed on this screen, and then click Install.
   Install	This screen displays status information while the product is installed.
   Configuration Assistants	This screen displays status information for the configuration assistants that configure the software and create a database. When the message is displayed after this process, click OK to continue.
   Execute Configuration Scripts	When prompted, read the instructions and then run the scripts mentioned on this screen. Click OK to continue.
   End of Installation	The configuration assistants configure several Web-based applications, including Oracle Enterprise Manager Database Control. This screen displays the URLs configured for these applications. Make a note of the URLs used. The port numbers used in these URLs are also recorded in the following file: oracle_home/install/portlist.ini To exit from Oracle Universal Installer, click Exit and then click Yes.

   
   

11 Installing Oracle Database Examples

If you plan to use the following products or features, then download and install the products from the Oracle Database Examples media:

• Oracle JDBC Development Drivers

• Oracle Database Examples

• Oracle Context Companion

• Various Oracle product demonstrations

For information about installing software and various Oracle product demonstrations from the Oracle Database Examples media, refer to Oracle Database Examples Installation Guide.

12 What to Do Next?

To become familiar with this release of Oracle Database, it is recommended that you complete the following tasks:

• Log in to Oracle Enterprise Manager Database Control using a Web browser.

  Oracle Enterprise Manager Database Control is a Web-based application that you can use to manage a single Oracle Database installation. The default URL for Database Control is similar to the following:

  http://host.domain:1158/em/
  

  To log in, use the user name SYS and connect as SYSDBA. Use the password that you specified for this user during the Oracle Database 11g installation.

• Refer to Oracle Database Installation Guide for HP-UX for information about required and optional postinstallation tasks, depending on the products that you want to use.

• Refer to Oracle Database Installation Guide for HP-UX for information about how to use Database Control to learn about the configuration of your installed database.

• To learn more about using Oracle Enterprise Manager Database Control to administer a database, refer to Oracle Database 2 Day DBA.

  This guide, designed for new Oracle DBAs, describes how to use Database Control to manage all aspects of an Oracle Database installation. It also provides information about how to enable e-mail notifications and automated backups, which you might not have configured during the installation.

13 Additional Information

This section contains information about the following:

• Product Licenses

• Purchasing Licenses, Version Updates, and Documentation

• Contacting Oracle Support Services

• Locating Product Documentation

Product Licenses

You are welcome to install and evaluate the products included in this media pack for 30 days under the terms of the Trial License Agreement. However, you must purchase a program license to continue using any product after the 30 day evaluation period. See the following section for information about purchasing program licenses.

Purchasing Licenses, Version Updates, and Documentation

You can purchase program licenses, updated versions of Oracle products, and printed versions of Oracle documentation from the Oracle Store Web site:

http://shop.oracle.com

Contacting Oracle Support Services

If you have purchased Oracle Product Support, you can call Oracle Support Services for assistance 24 hours a day, seven days a week. For information about purchasing Oracle Product Support or contacting Oracle Support Services, go to the Oracle Support Services Web site:

http://www.oracle.com/support

Locating Product Documentation

Documentation for Oracle products is available in both HTML and Adobe portable document format (PDF) formats from several locations:

• On discs in the media pack:

  • Platform-specific documentation is available on the product discs. To access this documentation, see the welcome.htm file located in the top-level directory of the installation media.

  • Generic product documentation is available in the Oracle Documentation Library.

• From the Oracle Technology Network Web site:

  http://www.oracle.com/technology/documentation

To view PDF documents, download the free Adobe Acrobat Reader from the Adobe Web site, if necessary:

http://www.adobe.com

14 Documentation Accessibility

Our goal is to make Oracle products, services, and supporting documentation accessible to all users, including users that are disabled. To that end, our documentation includes features that make information available to users of assistive technology. This documentation is available in HTML format, and contains markup to facilitate access by the disabled community. Accessibility standards will continue to evolve over time, and Oracle is actively engaged with other market-leading technology vendors to address technical obstacles so that our documentation can be accessible to all of our customers. For more information, visit the Oracle Accessibility Program Web site at http://www.oracle.com/accessibility/.

Accessibility of Code Examples in Documentation

Screen readers may not always correctly read the code examples in this document. The conventions for writing code require that closing braces should appear on an otherwise empty line; however, some screen readers may not always read a line of text that consists solely of a bracket or brace.

Accessibility of Links to External Web Sites in Documentation

This documentation may contain links to Web sites of other companies or organizations that Oracle does not own or control. Oracle neither evaluates nor makes any representations regarding the accessibility of these Web sites.

Access to Oracle Support

Oracle customers have access to electronic support through My Oracle Support. For information, visit http://www.oracle.com/support/contact.html or visit http://www.oracle.com/accessibility/support.html if you are hearing impaired.