Thank you very much for the reply
I have pasted the wrong XML in my earlier mail . Here is the correct one
pasted below . XML is validated against the same XSD .I am still getting the
null values for the nodes which has namespaces . Please Advice
Correct XML is pasted below
<?xml version="1.0" encoding="UTF-8"?>
<ServiceConfig xsi:noNamespaceSchemaLocation="WSI_Service_config.xsd"
xmlns:wsiconf="
http://sita/aero/csp/wsiconf/WSI_Config"
wsiconf:NamespaceSchemaLocation="common/WSI_ConfigCommonTypes.xsd"
xmlns:xsi="
http://www.w3.org/2001/XMLSchema-instance">
<wsiconf:Service name="SIP" version="1">
<ServiceInfo>
<wsiconf:ServiceInvoker profileId="SIPInvoker"/>
<wsiconf:ServiceProvider profileId="SIPProvider"/>
</ServiceInfo>
</wsiconf:Service>
<Service name="SIPInvokerService" version="1">
<ServiceInfo>
<wsiconf:ServiceInvoker profileId="SIPInvokerService"/>
<wsiconf:ServiceProvider profileId="RunwayQListener"/>
</ServiceInfo>
</Service>
<Service name="SIPMsgTransformer" version="1">
<ServiceInfo>
<wsiconf:ServiceInvoker profileId="SIPInvoker"/>
<wsiconf:ServiceProvider profileId="SIPMsgTransformer"/>
</ServiceInfo>
</Service>
<ServiceInvokerProfiles>
<wsiconf:Profile profileId="SIPInvoker">
<wsiconf:Context>
<wsiconf:Name>SIPInvoker</wsiconf:Name>
<wsiconf:Type>jms-binding</wsiconf:Type>
<wsiconf:EndPointUrl>file:E:/SitaWorkspace//conf/WSI_ESB</wsiconf:EndPointUrl>
<wsiconf:ClassOfService>aero.sita.csp.wsi.sf.consumer.impl.SIPInvoker</wsiconf:ClassOfService>
</wsiconf:Context>
<wsiconf:PropertyFile fileName="/sipinvoker.properties"/>
</wsiconf:Profile>
</ServiceInvokerProfiles>
<ServiceProviderProfiles>
<wsiconf:Profile profileId="SIPProvider">
<!-- Used in Open system to Legacy flow. This profile will listen to
the queue where mule server puts the message and connects to
the SIP server to process the message -->
<wsiconf:Context>
<wsiconf:Name>SIPSYSTEM</wsiconf:Name>
<wsiconf:Type>jms-binding</wsiconf:Type>
<wsiconf:EndPointUrl>file:E:/SitaWorkspace//conf/WSI_ESB</wsiconf:EndPointUrl>
<wsiconf:ClassOfService>aero.sita.csp.wsi.sf.provider.impl.SIPServiceProvider</wsiconf:ClassOfService>
</wsiconf:Context>
<wsiconf:PropertyFile fileName="/sipprovider.properties" />
</wsiconf:Profile>
<wsiconf:Profile profileId="SIPInvokerService">
<!-- Used in Legacy to Open system flow. This profile will listen to
the queue where the legacy host puts Type A / Type B message and forwards
to SIP transformation service -->
<wsiconf:Context>
<wsiconf:Name>SIPSYSTEM</wsiconf:Name>
<wsiconf:Type>jms-binding</wsiconf:Type>
<wsiconf:EndPointUrl>file:E:/SitaWorkspace//conf/WSI_ESB</wsiconf:EndPointUrl>
<wsiconf:ClassOfService>aero.sita.csp.wsi.sf.consumer.impl.SIPInvokerService</wsiconf:ClassOfService>
</wsiconf:Context>
<wsiconf:Properties>
<wsiconf:Property name="jms.icf"
value="com.sun.jndi.fscontext.RefFSContextFactory" />
<wsiconf:Property name="jms.qcf" value="CSPQMCF" />
<wsiconf:Property name="jms.req" value="RUNWAYQ" />
<wsiconf:Property name="jms.res" value="B2C" />
</wsiconf:Properties>
</wsiconf:Profile>
<wsiconf:Profile profileId="RunwayQListener">
<!-- Used in Legacy to Open system flow. This profile will listen to
the queue where the legacy host puts Type A / Type B message and forwards
to SIP transformation service -->
<wsiconf:Context>
<wsiconf:Name>SIPSYSTEM</wsiconf:Name>
<wsiconf:Type>jms-binding</wsiconf:Type>
<wsiconf:EndPointUrl>file:E:/SitaWorkspace//conf/WSI_ESB</wsiconf:EndPointUrl>
<wsiconf:ClassOfService>aero.sita.csp.wsi.sf.consumer.impl.SIPInvokerService</wsiconf:ClassOfService>
</wsiconf:Context>
<wsiconf:Properties>
<wsiconf:Property name="jms.icf"
value="com.sun.jndi.fscontext.RefFSContextFactory" />
<wsiconf:Property name="jms.qcf" value="CSPQMCF" />
<wsiconf:Property name="jms.req" value="RUNWAYQ" />
<wsiconf:Property name="jms.res" value="C2B" />
</wsiconf:Properties>
</wsiconf:Profile>
<wsiconf:Profile profileId="SIPMsgTransformer">
<!-- Used in Legacy to Open system flow. This profile will listen to
the queue where mule server puts the message and connects to the SIP server
to transform the message -->
<wsiconf:Context>
<wsiconf:Name>SIPSYSTEM</wsiconf:Name>
<wsiconf:Type>jms-binding</wsiconf:Type>
<wsiconf:EndPointUrl>file:E:/SitaWorkspace//conf/WSI_ESB</wsiconf:EndPointUrl>
<wsiconf:ClassOfService>aero.sita.csp.wsi.sf.provider.impl.SIPServiceProvider</wsiconf:ClassOfService>
</wsiconf:Context>
<wsiconf:Properties>
<wsiconf:Property name="jms.icf"
value="com.sun.jndi.fscontext.RefFSContextFactory" />
<wsiconf:Property name="jms.qcf" value="CSPQMCF" />
<wsiconf:Property name="jms.req" value="B2S" />
<wsiconf:Property name="jms.res" value="S2B" />
<wsiconf:Property name="runway.cfgLocation"
value="@SIPTransformationCfgLocation@" />
</wsiconf:Properties>
</wsiconf:Profile>
</ServiceProviderProfiles>
<GlobalSettings>
<Properties>
<wsiconf:Property name="consumer.timeout" value="120" />
<wsiconf:Property name="proxy.lazyloading" value="true" />
<wsiconf:Property name="proxy.maxlimit" value="15" />
<wsiconf:Property name="proxy.timeout" value="100" />
<wsiconf:Property name="jmxagent.rmiurl"
value="service:jmx:rmi:///jndi/rmi://127.0.0.1:8087/server" />
</Properties>
</GlobalSettings>
</ServiceConfig>
Wolfgang Laun-2 wrote:
>
> Your XML file isn't valid against your XML schema. (See below.)
> I suggest that you use the JAXB unmarshaller's capability of
> validating an XML file.
> Wolfgang
>
> On 9/22/08, kkalkur <karthik_kalkur_at_mindtree.com> wrote:
>>
>>
>> Hi All
>> I am using jaxb2.0.5 to parse an XML which contain namespaces . When i
>> parse
>> the XML i am getting null value for the node which has namespace .
>> Here is the XML
>>
>> <?xml version="1.0" encoding="UTF-8"?>
>> <ServiceConfig xsi:noNamespaceSchemaLocation="WSI_Service_config.xsd"
>> xmlns:wsiconf="http://sita/aero/csp/wsiconf/WSI_Config"
>>
>> xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
>> <Service name="SIP" version="1.0">
>
>
> Only a minor problem:
> 7.37: cvc-pattern-valid: Value '1.0' is not facet-valid with respect to
> pattern '[0-9]{1,16}' for type 'NumericStringLength1to16'.
>
>
>
>> <ServiceInfo>
>> <wsiconf:ServiceInvoker profileId="SIPInvoker"/>
>> <wsiconf:ServiceProvider
>> profileId="SIPProvider"/>
>> </ServiceInfo>
>> </Service>
>
>
> Here, a <ServiceInvokerProfiles> element is missing.
> 2.28: cvc-complex-type.2.4.a: Invalid content was found starting with
> element 'ServiceProviderProfiles'. One of '{Service,
> ServiceInvokerProfiles}' is expected.
>
> <ServiceProviderProfiles>
>> <wsiconf:Profile profileId="SIPProvider">
>> <wsiconf:Context>
>> <wsiconf:Name>SIPSYSTEM</wsiconf:Name>
>> <wsiconf:Type>jms-binding</wsiconf:Type>
>>
>>
>> <wsiconf:EndPointUrl>file:@WSI_JNDI_BINDING_PATH
>> @</wsiconf:EndPointUrl>
>>
>>
>> <wsiconf:ClassOfService>aero.sita.csp.wsi.sf.provider.impl.SIPServiceProvider</wsiconf:ClassOfService>
>> </wsiconf:Context>
>>
>> </wsiconf:Profile>
>>
>> </ServiceProviderProfiles>
>>
>> <GlobalSettings>
>> <Properties>
>> <wsiconf:Property name="consumer.timeout"
>> value="120" />
>> <wsiconf:Property name="proxy.lazyloading"
>> value="true" />
>> <wsiconf:Property name="proxy.maxlimit"
>> value="15"
>> />
>> <wsiconf:Property name="proxy.timeout"
>> value="100"
>> />
>> <wsiconf:Property name="jmxagent.rmiurl"
>> value="@WSI_SIP_JMX_URL@" />
>> </Properties>
>> </GlobalSettings>
>> </ServiceConfig>
>> I am able to parse Service node but when when i try to parse the
>> Profile
>> node under the ServiceProviderProfiles .I am getting null.
>> I have uploaded the XSd for the XML .
>>
>> http://www.nabble.com/file/p19606363/conf.zip conf.zip
>>
>>
>>
>> --
>> View this message in context:
>> http://www.nabble.com/JAXB-NameSpace-issue-tp19606363p19606363.html
>> Sent from the java.net - jaxb users mailing list archive at Nabble.com.
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe_at_jaxb.dev.java.net
>> For additional commands, e-mail: users-help_at_jaxb.dev.java.net
>>
>>
>
>
--
View this message in context: http://www.nabble.com/JAXB-NameSpace-issue-tp19606363p19621066.html
Sent from the java.net - jaxb users mailing list archive at Nabble.com.