Hi Mohamed,
can you pls. send me your domain.xml?
Thanks.
WBR,
Alexey.
> Thanks again for your reply. I normally run java -Xmx512m -jar
> ../glassfish/modules/glassfish.jar by default, exception above was
> captured
> from the console. I luanched glassfish again and compared server.log
> to the
> console, couldn't really find differences. I have attached
> server.log if you
> like to have a look. Thanks.
>
> BR,
> Mohamed http://www.nabble.com/file/p25817601/server.log server.log
>
> Oleksiy Stashok wrote:
>>
>> Hi Mohamed,
>>
>>
>>> Sorry for cross posting but I posted another question regarding TCP/
>>> SOAP in
>>> GlassFish here
>>> http://www.nabble.com/SOAP-TCP-has-been-integrated-to-Glassfish-V3-td25045927.html#a25045927
>>> .
>> Oh, it's difficult to follow all the forums :)
>>
>>>
>>> After reading Paul's and your blog posts. I realise TCP-SOAP is
>>> already
>>> integrated,
>> That's true.
>>
>>> I can find soap-tcp.jar under the modules. I added a
>>> configuration similiar to the one you posted but Glassfish fails to
>>> start.
>> What exactly error you see?
>> Can you pls. run the GF is standalone mode like:
>> java -Xmx512m -jar ../glassfish/modules/glassfish.jar
>>
>> cause there is some logging issue now, and you may not see entire log
>> in server.log file.
>>
>> Thanks.
>>
>> WBR,
>> Alexey.
>>
>>>
>>> melshami wrote:
>>>>
>>>> Thanks Alexey, I managed to install the bundle using Flex shell, I
>>>> think
>>>> in the current build there is no need to add other paths to
>>>> felix.auto.start.1, now I will need to test the custom filter:)
>>>>
>>>> The exception is similiar to the previous one but I don't think
>>>> it's
>>>> ClassDefNotFound exception.
>>>>
>>>> java.lang.NullPointerException
>>>> at
>>>> com
>>>> .sun
>>>> .grizzly
>>>> .config
>>>> .GrizzlyServiceListener
>>>> .initializeListener(GrizzlyServiceListener.java:83)
>>>> at
>>>> com
>>>> .sun
>>>> .grizzly
>>>> .config
>>>> .GrizzlyServiceListener.configure(GrizzlyServiceListener.java:77)
>>>> at
>>>> com
>>>> .sun
>>>> .enterprise
>>>> .v3.services.impl.GrizzlyListener.configure(GrizzlyListener.java:
>>>> 59)
>>>> at
>>>> com
>>>> .sun
>>>> .enterprise
>>>> .v3.services.impl.GrizzlyProxy.configureGrizzly(GrizzlyProxy.java:
>>>> 125)
>>>> at
>>>> com
>>>> .sun
>>>> .enterprise.v3.services.impl.GrizzlyProxy.<init>(GrizzlyProxy.java:
>>>> 116)
>>>>
>>>> BR,
>>>> Mohamed
>>>>
>>>> Oleksiy Stashok wrote:
>>>>>
>>>>> Hello again :)
>>>>>
>>>>>> I see the changes is with network listener protocol attribute
>>>>>> value
>>>>>> for the
>>>>>> http and admin listeners. I tested all possible alternatives
>>>>>> before
>>>>>> bothering you with one more question:).
>>>>> Just to check, do you see any exceptions in a log?
>>>>>
>>>>>
>>>>>> btw I am using glassfish-v3-b66-windows version. Could it be
>>>>>> the a
>>>>>> problem
>>>>>> with this build?
>>>>> It should be fine, I believe.
>>>>>
>>>>>> I have attached TCPProtcol.jar in case if you wanted to test it
>>>>>> yourself,
>>>>>> but I doubt it even reached the pointer where the classes were
>>>>>> loaded
>>>>>> http://www.nabble.com/file/p25767056/TCPProtocol.jar
>>>>>> TCPProtocol.jar
>>>>> Ok, how do you include jar above to a GF? :) IMO this is the
>>>>> issue.
>>>>>
>>>>> AFAIK you have to create osgi module from your jar and install
>>>>> it to
>>>>> GFv3.
>>>>>
>>>>> 1) How to create osgi module?
>>>>> Here I'm not big expert. You can take a look on internet, or check
>>>>> grizzly project's maven scripts to see how you can make osgi
>>>>> module.
>>>>> What I did with the jar you sent - is unpacked it and changed
>>>>> MANIFEST.MF file, so it looks like [1] and then repackaged jar
>>>>> file
>>>>> again.
>>>>>
>>>>> 2) Install osgi module to GFv3
>>>>> Not sure, may be it could be done easier way, but here are steps I
>>>>> did.
>>>>>
>>>>> 2.1) Enabled Felix shell for GFv3
>>>>> You can take a look here [2], but note that paths there are
>>>>> incorrect.
>>>>> Here are correct paths [3]
>>>>>
>>>>> 2.2) Install osgi module
>>>>> Please look at [4], starting from step 5, but run glassfish using
>>>>> (suppose you're in glassfishv3/bin folder)
>>>>> java -Xmx512m -jar ../glassfish/modules/glassfish.jar
>>>>>
>>>>> 2.3) Done
>>>>> After installing osgi module, restart GFv3 - it should work.
>>>>> Seems it works for me.
>>>>>
>>>>> Thanks.
>>>>>
>>>>> WBR,
>>>>> Alexey.
>>>>>
>>>>>
>>>>> [1]
>>>>> Manifest-Version: 1.0
>>>>> Ant-Version: Apache Ant 1.7.1
>>>>> Created-By: 14.0-b16 (Sun Microsystems Inc.)
>>>>> X-COMMENT: Main-Class will be added automatically by build
>>>>> Export-Package: scedev.grizzly.protocols
>>>>> implementation-version: 0.1
>>>>> package: scedev.grizzly.protocols
>>>>> Bundle-Name: scedev-grizzly
>>>>> Bundle-Vendor: scedev
>>>>> Bundle-Version: 0.1
>>>>> Bnd-LastModified: 1254747835722
>>>>> Bundle-ManifestVersion: 2
>>>>> Bundle-SymbolicName: scedev.grizzly.protocols
>>>>> Import-Package:
>>>>> com
>>>>> .sun
>>>>> .grizzly
>>>>> ,com
>>>>> .sun
>>>>> .grizzly
>>>>> .filter
>>>>> ,com
>>>>> .sun
>>>>> .grizzly
>>>>> .http
>>>>> ,com
>>>>> .sun
>>>>> .grizzly
>>>>> .http.portunif,com.sun.grizzly.portunif,com.sun.grizzly.util
>>>>>
>>>>> [2] http://blogs.sun.com/arungupta/entry/totd_34_using_felix_shell
>>>>>
>>>>> [3] felix.auto.start.1= \
>>>>> reference:${com.sun.aas.installRootURI}modules/osgi-main.jar\
>>>>> ${com.sun.aas.installRootURI}modules/org.apache.felix.shell.jar \
>>>>> ${com.sun.aas.installRootURI}modules/
>>>>> org.apache.felix.shell.tui.jar
>>>>>
>>>>> [4] http://blogs.sun.com/arungupta/entry/totd_36_deploy_osgi_bundles
>>>>>
>>>>>
>>>>>>
>>>>>> Oleksiy Stashok wrote:
>>>>>>>
>>>>>>> Hi Mohamed,
>>>>>>>
>>>>>>> my fault, please try following config:
>>>>>>>
>>>>>>> <network-config>
>>>>>>> <protocols>
>>>>>>> <protocol name="pu-protocol">
>>>>>>> <port-unification>
>>>>>>> <protocol-finder protocol="http"
>>>>>>> classname="com.sun.grizzly.http.portunif.HttpProtocolFinder"
>>>>>>> name="http-finder" />
>>>>>>> <protocol-finder protocol="rpc"
>>>>>>> classname="scedev.grizzly.protocols.TCPProtocolFinder"
>>>>>>> name="rpc-
>>>>>>> protocol-finder" />
>>>>>>> </port-unification>
>>>>>>> </protocol>
>>>>>>> <protocol name="http">
>>>>>>> <http max-connections="250" default-virtual-
>>>>>>> server="server" server-name="" />
>>>>>>> </protocol>
>>>>>>> <protocol name="rpc">
>>>>>>> <protocol-chain-instance-handler>
>>>>>>> <protocol-chain>
>>>>>>> <protocol-filter
>>>>>>> classname="scedev.grizzly.protocols.TCPProtocolFilter"
>>>>>>> name="rpc-
>>>>>>> filter" />
>>>>>>> </protocol-chain>
>>>>>>> </protocol-chain-instance-handler>
>>>>>>> </protocol>
>>>>>>> <protocol name="http-listener-1">
>>>>>>> <http max-connections="250" default-virtual-
>>>>>>> server="server" server-name="">
>>>>>>> <file-cache enabled="false" />
>>>>>>> </http>
>>>>>>> </protocol>
>>>>>>> <protocol security-enabled="true" name="http-
>>>>>>> listener-2">
>>>>>>> <http max-connections="250" default-virtual-
>>>>>>> server="server" server-name="">
>>>>>>> <file-cache enabled="false" />
>>>>>>> </http>
>>>>>>> <ssl ssl3-enabled="false" cert-nickname="s1as" />
>>>>>>> </protocol>
>>>>>>> <protocol name="admin-listener">
>>>>>>> <http max-connections="250" default-virtual-
>>>>>>> server="__asadmin" server-name="">
>>>>>>> <file-cache enabled="false" />
>>>>>>> </http>
>>>>>>> </protocol>
>>>>>>> </protocols>
>>>>>>> <network-listeners>
>>>>>>> <network-listener port="8787" protocol="pu-protocol"
>>>>>>> transport="tcp" name="tcprpc-listener" thread-pool="thread-
>>>>>>> pool-1" />
>>>>>>> <network-listener port="8080" protocol="http-listener-1"
>>>>>>> transport="tcp" name="http-listener-1" thread-pool="http-thread-
>>>>>>> pool" />
>>>>>>> <network-listener port="4848" protocol="admin-listener"
>>>>>>> transport="tcp" name="admin-listener" thread-pool="thread-
>>>>>>> pool-1" />
>>>>>>> </network-listeners>
>>>>>>> <transports>
>>>>>>> <transport name="tcp" />
>>>>>>> </transports>
>>>>>>> </network-config>
>>>>>>>
>>>>>>> WBR,
>>>>>>> Alexey.
>>>>>>>
>>>>>>> On Oct 6, 2009, at 12:53 , melshami wrote:
>>>>>>>
>>>>>>>>
>>>>>>>> Hi Alexey,
>>>>>>>>
>>>>>>>> Thanks for bearing with me, still no luck. I tried your
>>>>>>>> suggestion
>>>>>>>> and I
>>>>>>>> tried different variations of configuration protocol element.
>>>>>>>>
>>>>>>>> here is my current configuration:
>>>>>>>> <network-config>
>>>>>>>> <protocols>
>>>>>>>> <protocol name="pu-protocol">
>>>>>>>> <port-unification>
>>>>>>>> <protocol-finder protocol="http"
>>>>>>>> classname="com.sun.grizzly.http.portunif.HttpProtocolFinder"
>>>>>>>> name="http-finder" />
>>>>>>>> <protocol-finder protocol="rpc"
>>>>>>>> classname="scedev.grizzly.protocols.TCPProtocolFinder"
>>>>>>>> name="rpc-protocol-finder" />
>>>>>>>> </port-unification>
>>>>>>>> </protocol>
>>>>>>>> <protocol name="http" />
>>>>>>>> <protocol name="rpc">
>>>>>>>> <protocol-chain-instance-handler>
>>>>>>>> <protocol-chain>
>>>>>>>> <protocol-filter
>>>>>>>> classname="scedev.grizzly.protocols.TCPProtocolFilter"
>>>>>>>> name="rpc-
>>>>>>>> filter" />
>>>>>>>> </protocol-chain>
>>>>>>>> </protocol-chain-instance-handler>
>>>>>>>> </protocol>
>>>>>>>> <protocol name="http-listener-1">
>>>>>>>> <http max-connections="250" default-virtual-
>>>>>>>> server="server"
>>>>>>>> server-name="">
>>>>>>>> <file-cache enabled="false" />
>>>>>>>> </http>
>>>>>>>> </protocol>
>>>>>>>> <protocol security-enabled="true" name="http-listener-2">
>>>>>>>> <http max-connections="250" default-virtual-
>>>>>>>> server="server"
>>>>>>>> server-name="">
>>>>>>>> <file-cache enabled="false" />
>>>>>>>> </http>
>>>>>>>> <ssl ssl3-enabled="false" cert-nickname="s1as" />
>>>>>>>> </protocol>
>>>>>>>> <protocol name="admin-listener">
>>>>>>>> <http max-connections="250" default-virtual-
>>>>>>>> server="__asadmin"
>>>>>>>> server-name="">
>>>>>>>> <file-cache enabled="false" />
>>>>>>>> </http>
>>>>>>>> </protocol>
>>>>>>>> </protocols>
>>>>>>>> <network-listeners>
>>>>>>>> <network-listener port="8787" protocol="pu-protocol"
>>>>>>>> transport="tcp" name="tcprpc-listener" thread-pool="thread-
>>>>>>>> pool-1" />
>>>>>>>> <network-listener port="8080" protocol="pu-protocol"
>>>>>>>> transport="tcp" name="http-listener-1" thread-pool="http-
>>>>>>>> thread-
>>>>>>>> pool" />
>>>>>>>> <network-listener port="4848" protocol="pu-protocol"
>>>>>>>> transport="tcp" name="admin-listener" thread-pool="thread-
>>>>>>>> pool-1" />
>>>>>>>> </network-listeners>
>>>>>>>> <transports>
>>>>>>>> <transport name="tcp" />
>>>>>>>> </transports>
>>>>>>>> </network-config>
>>>>>>>>
>>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>>
>>>>>>>>> Hi Mohamed,
>>>>>>>>>
>>>>>>>>> hmm, this is a bug - I'll fix it for coming GF release.
>>>>>>>>> Meanwhile you can workaround this issue by declaring http
>>>>>>>>> protocol,
>>>>>>>>> within the port unification declaration, together with rpc
>>>>>>>>> protocol,
>>>>>>>>> like:
>>>>>>>>>
>>>>>>>>> <protocol name="pu-protocol">
>>>>>>>>> <port-unification>
>>>>>>>>> <protocol-finder name="http-finder"
>>>>>>>>> classname="com.sun.grizzly.http.portunif.HttpProtocolFinder"
>>>>>>>>> protocol="http"/>
>>>>>>>>> <protocol-finder name="rpc-protocol-finder"
>>>>>>>>> classname="scedev.grizzly.protocols.TCPProtocolFinder"
>>>>>>>>> protocol="rpc"/>
>>>>>>>>> </port-unification>
>>>>>>>>> </protocol>
>>>>>>>>>
>>>>>>>>> <protocol name="http">
>>>>>>>>> </protocol>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> WBR,
>>>>>>>>> Alexey.
>>>>>>>>>
>>>>>>>>> On Oct 6, 2009, at 10:55 , melshami wrote:
>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Hi Alexey,
>>>>>>>>>>
>>>>>>>>>> I Can't seem to get this right, here is my configuration:
>>>>>>>>>>
>>>>>>>>>> <network-config>
>>>>>>>>>> <protocols>
>>>>>>>>>> <protocol name="pu-protocol">
>>>>>>>>>> <port-unification>
>>>>>>>>>> <protocol-finder protocol="rpc" name="rpc-protocol-
>>>>>>>>>> finder"
>>>>>>>>>> classname="scedev.grizzly.protocols.TCPProtocolFinder" />
>>>>>>>>>> </port-unification>
>>>>>>>>>> </protocol>
>>>>>>>>>> <protocol name="rpc">
>>>>>>>>>> <protocol-chain-instance-handler>
>>>>>>>>>> <protocol-chain>
>>>>>>>>>> <protocol-filter name="rpc"
>>>>>>>>>> classname="scedev.grizzly.protocols.TCPProtocolFilter" />
>>>>>>>>>> </protocol-chain>
>>>>>>>>>> </protocol-chain-instance-handler>
>>>>>>>>>> </protocol>
>>>>>>>>>> <protocol name="http-listener-1">
>>>>>>>>>> <http default-virtual-server="server" max-
>>>>>>>>>> connections="250"
>>>>>>>>>> server-name="">
>>>>>>>>>> <file-cache enabled="false" />
>>>>>>>>>> </http>
>>>>>>>>>> </protocol>
>>>>>>>>>> <protocol security-enabled="true" name="http-
>>>>>>>>>> listener-2">
>>>>>>>>>> <http default-virtual-server="server" max-
>>>>>>>>>> connections="250"
>>>>>>>>>> server-name="">
>>>>>>>>>> <file-cache enabled="false" />
>>>>>>>>>> </http>
>>>>>>>>>> <ssl ssl3-enabled="false" cert-nickname="s1as" />
>>>>>>>>>> </protocol>
>>>>>>>>>> <protocol name="admin-listener">
>>>>>>>>>> <http default-virtual-server="__asadmin" max-
>>>>>>>>>> connections="250"
>>>>>>>>>> server-name="">
>>>>>>>>>> <file-cache enabled="false" />
>>>>>>>>>> </http>
>>>>>>>>>> </protocol>
>>>>>>>>>> </protocols>
>>>>>>>>>> <network-listeners>
>>>>>>>>>> <network-listener port="8787" protocol="pu-protocol"
>>>>>>>>>> transport="tcp" name="tcprpc-listener" thread-pool="http-
>>>>>>>>>> thread-
>>>>>>>>>> pool" />
>>>>>>>>>> <network-listener port="8080" protocol="http-listener-1"
>>>>>>>>>> transport="tcp" name="http-listener-1" thread-pool="http-
>>>>>>>>>> thread-
>>>>>>>>>> pool" />
>>>>>>>>>> <network-listener port="8181" protocol="http-listener-2"
>>>>>>>>>> transport="tcp" name="http-listener-2" thread-pool="http-
>>>>>>>>>> thread-
>>>>>>>>>> pool" />
>>>>>>>>>> <network-listener port="4848" protocol="admin-listener"
>>>>>>>>>> transport="tcp" name="admin-listener" thread-pool="http-
>>>>>>>>>> thread-
>>>>>>>>>> pool" />
>>>>>>>>>> </network-listeners>
>>>>>>>>>> <transports>
>>>>>>>>>> <transport name="tcp" />
>>>>>>>>>> </transports>
>>>>>>>>>> </network-config>
>>>>>>>>>>
>>>>>>>>>> GlassFish won't start due to this exception:
>>>>>>>>>>
>>>>>>>>>> #|2009-10-06T09:48:46.654+0100|SEVERE|glassfish|null|
>>>>>>>>>> _ThreadID=11;_ThreadName=Thread-3;|Unable
>>>>>>>>>> to start v3. Closing all ports
>>>>>>>>>> java.lang.NullPointerException
>>>>>>>>>> at
>>>>>>>>>> com
>>>>>>>>>> .sun
>>>>>>>>>> .grizzly
>>>>>>>>>> .config
>>>>>>>>>> .GrizzlyServiceListener
>>>>>>>>>> .initializeListener(GrizzlyServiceListener.java:83)
>>>>>>>>>> at
>>>>>>>>>> com
>>>>>>>>>> .sun
>>>>>>>>>> .grizzly
>>>>>>>>>> .config
>>>>>>>>>> .GrizzlyServiceListener
>>>>>>>>>> .configure(GrizzlyServiceListener.java:
>>>>>>>>>> 77)
>>>>>>>>>> at
>>>>>>>>>> com
>>>>>>>>>> .sun
>>>>>>>>>> .enterprise
>>>>>>>>>> .v3
>>>>>>>>>> .services
>>>>>>>>>> .impl.GrizzlyListener.configure(GrizzlyListener.java:
>>>>>>>>>> 59)
>>>>>>>>>> at
>>>>>>>>>> com
>>>>>>>>>> .sun
>>>>>>>>>> .enterprise
>>>>>>>>>> .v3
>>>>>>>>>> .services
>>>>>>>>>> .impl.GrizzlyProxy.configureGrizzly(GrizzlyProxy.java:
>>>>>>>>>> 125)
>>>>>>>>>> at
>>>>>>>>>> com
>>>>>>>>>> .sun
>>>>>>>>>> .enterprise
>>>>>>>>>> .v3.services.impl.GrizzlyProxy.<init>(GrizzlyProxy.java:
>>>>>>>>>> 116)
>>>>>>>>>> at
>>>>>>>>>> com
>>>>>>>>>> .sun
>>>>>>>>>> .enterprise
>>>>>>>>>> .v3
>>>>>>>>>> .services
>>>>>>>>>> .impl.GrizzlyService.createNetworkProxy(GrizzlyService.java:
>>>>>>>>>> 344)
>>>>>>>>>> at
>>>>>>>>>> com
>>>>>>>>>> .sun
>>>>>>>>>> .enterprise
>>>>>>>>>> .v3
>>>>>>>>>> .services
>>>>>>>>>> .impl.GrizzlyService.postConstruct(GrizzlyService.java:
>>>>>>>>>> 266)
>>>>>>>>>> at
>>>>>>>>>> com
>>>>>>>>>> .sun
>>>>>>>>>> .hk2.component.AbstractWombImpl.inject(AbstractWombImpl.java:
>>>>>>>>>> 174)
>>>>>>>>>> at com.sun.hk2.component.ConstructorWomb
>>>>>>>>>> $1.run(ConstructorWomb.java:
>>>>>>>>>> 91)
>>>>>>>>>> at java.security.AccessController.doPrivileged(Native
>>>>>>>>>> Method)
>>>>>>>>>>
>>>>>>>>>> I have set the classpath for the custom protocol filter and
>>>>>>>>>> finder
>>>>>>>>>> in the
>>>>>>>>>> JVM classpath settings.
>>>>>>>>>>
>>>>>>>>>> Is there anything else I am missing?
>>>>>>>>>>
>>>>>>>>>> Regards,
>>>>>>>>>> Mohamed
>>>>>>>>>>
>>>>>>>>>> melshami wrote:
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> It's not a problem at all, am still testing we have enough
>>>>>>>>>>> time
>>>>>>>>>>> before
>>>>>>>>>>> production so I hope there will be a new release soon. I
>>>>>>>>>>> will try
>>>>>>>>>>> that and
>>>>>>>>>>> will get back to you.
>>>>>>>>>>>
>>>>>>>>>>> Thanks for your help:)
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> I think since I am using glassfish-prelude v3 it still
>>>>>>>>>>>>> uses v2
>>>>>>>>>>>>> configuraiton
>>>>>>>>>>>>> scheme, if I am correct it's sun-domain_1_3.dtd which has
>>>>>>>>>>>>> all
>>>>>>>>>>>>> network
>>>>>>>>>>>>> configuration under the <http-service> element. So I am
>>>>>>>>>>>>> not
>>>>>>>>>>>>> sure
>>>>>>>>>>>>> where to
>>>>>>>>>>>>> set the protocol-finder name under this scheme.
>>>>>>>>>>>> I think there is no way to use port unification with
>>>>>>>>>>>> prelude :(
>>>>>>>>>>>> Will it be a problem for you to use latest promoted GFv3
>>>>>>>>>>>> [1]?
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks.
>>>>>>>>>>>>
>>>>>>>>>>>> WBR,
>>>>>>>>>>>> Alexey.
>>>>>>>>>>>>
>>>>>>>>>>>> [1] http://download.java.net/glassfish/v3/promoted/
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>> Mohamed
>>>>>>>>>>>>>
>>>>>>>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> you can take a look at config module in grizzly workspace
>>>>>>>>>>>>>> [1].
>>>>>>>>>>>>>> There you can find unit tests with different
>>>>>>>>>>>>>> configurations
>>>>>>>>>>>>>> like
>>>>>>>>>>>>>> [2],
>>>>>>>>>>>>>> which actually has port unification enabled, but you can
>>>>>>>>>>>>>> redefine
>>>>>>>>>>>>>> config to use X-protocol directly without port
>>>>>>>>>>>>>> unification.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> WBR,
>>>>>>>>>>>>>> Alexey.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> [1] svn checkout
>>>>>>>>>>>>>> https://www.dev.java.net/svn/grizzly/trunk/code/modules/config
>>>>>>>>>>>>>> [2]
>>>>>>>>>>>>>> <network-config>
>>>>>>>>>>>>>> <transports>
>>>>>>>>>>>>>> <transport name="tcp"/>
>>>>>>>>>>>>>> </transports>
>>>>>>>>>>>>>> <protocols>
>>>>>>>>>>>>>> <protocol name="pu-protocol">
>>>>>>>>>>>>>> <port-unification>
>>>>>>>>>>>>>> <protocol-finder name="http-finder"
>>>>>>>>>>>>>> classname
>>>>>>>>>>>>>> ="com.sun.grizzly.http.portunif.HttpProtocolFinder"
>>>>>>>>>>>>>> protocol="http"/>
>>>>>>>>>>>>>> <protocol-finder name="X-protocol-finder"
>>>>>>>>>>>>>> classname="com.sun.grizzly.config.XProtocolFinder"
>>>>>>>>>>>>>> protocol="X-
>>>>>>>>>>>>>> protocol"/>
>>>>>>>>>>>>>> </port-unification>
>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> <protocol name="http">
>>>>>>>>>>>>>> <http enable-comet-support="true"/>
>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> <protocol name="X-protocol">
>>>>>>>>>>>>>> <protocol-chain-instance-handler>
>>>>>>>>>>>>>> <protocol-chain>
>>>>>>>>>>>>>> <protocol-filter name="x-filter"
>>>>>>>>>>>>>> classname="com.sun.grizzly.config.XProtocolFilter"/>
>>>>>>>>>>>>>> </protocol-chain>
>>>>>>>>>>>>>> </protocol-chain-instance-handler>
>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> </protocols>
>>>>>>>>>>>>>> <network-listeners>
>>>>>>>>>>>>>> <thread-pool name="defaultThreadPool"/>
>>>>>>>>>>>>>> <network-listener name="http-listener" port="38082"
>>>>>>>>>>>>>> transport="tcp" protocol="pu-protocol" thread-
>>>>>>>>>>>>>> pool="defaultThreadPool"/>
>>>>>>>>>>>>>> </network-listeners>
>>>>>>>>>>>>>> </network-config>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Oct 5, 2009, at 15:14 , melshami wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi Alexey,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Thanks very much for the prompt reply. I am a bit
>>>>>>>>>>>>>>> confused to
>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>> honest
>>>>>>>>>>>>>>> since I am new to Grizzly. But I wish to configure a
>>>>>>>>>>>>>>> listener
>>>>>>>>>>>>>>> which
>>>>>>>>>>>>>>> listens
>>>>>>>>>>>>>>> to custom TCP based protocol. As a starting point I am
>>>>>>>>>>>>>>> trying
>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>> configure a
>>>>>>>>>>>>>>> simple echo server which replies to socket connections
>>>>>>>>>>>>>>> on
>>>>>>>>>>>>>>> GlassFish
>>>>>>>>>>>>>>> v3.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>> Mohamed
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi Mohamed,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I can't seem to find any documentation for how to
>>>>>>>>>>>>>>>>> configure
>>>>>>>>>>>>>>>>> grizlly
>>>>>>>>>>>>>>>>> listeners and connectors on GlassFish v3.
>>>>>>>>>>>>>>>> Currently doc team is working on that.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> So far I can find only this page
>>>>>>>>>>>>>>>>> http://wiki.glassfish.java.net/Wiki.jsp?
>>>>>>>>>>>>>>>>> page=GrizzlyConfigOnePager,
>>>>>>>>>>>>>>>>> which
>>>>>>>>>>>>>>>>> refers to a new scheme and it's not complete yet.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Anyone can help with this please?
>>>>>>>>>>>>>>>> Do you have any specific item in mind you'd like to
>>>>>>>>>>>>>>>> configure?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Thanks.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> WBR,
>>>>>>>>>>>>>>>> Alexey.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> BR,
>>>>>>>>>>>>>>>>> Mohamed
>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>> View this message in context:
>>>>>>>>>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25750048.html
>>>>>>>>>>>>>>>>> Sent from the Grizzly - Users mailing list archive at
>>>>>>>>>>>>>>>>> Nabble.com.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>>>>>> To unsubscribe, e-mail: users-
>>>>>>>>>>>>>>>>> unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>> For additional commands, e-mail: users-
>>>>>>>>>>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>>>>> To unsubscribe, e-mail:
>>>>>>>>>>>>>>>> users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>> For additional commands, e-mail:
>>>>>>>>>>>>>>>> users-help_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> View this message in context:
>>>>>>>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25750628.html
>>>>>>>>>>>>>>> Sent from the Grizzly - Users mailing list archive at
>>>>>>>>>>>>>>> Nabble.com.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>>>> To unsubscribe, e-mail: users-
>>>>>>>>>>>>>>> unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>>>> For additional commands, e-mail: users-
>>>>>>>>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> View this message in context:
>>>>>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25752899.html
>>>>>>>>>>>>> Sent from the Grizzly - Users mailing list archive at
>>>>>>>>>>>>> Nabble.com.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>> For additional commands, e-mail: users-
>>>>>>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>> To unsubscribe, e-mail: users-
>>>>>>>>>>>> unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> View this message in context:
>>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25765021.html
>>>>>>>>>> Sent from the Grizzly - Users mailing list archive at
>>>>>>>>>> Nabble.com.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>> To unsubscribe, e-mail: users-
>>>>>>>>>> unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>> For additional commands, e-mail: users-
>>>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> View this message in context:
>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25766557.html
>>>>>>>> Sent from the Grizzly - Users mailing list archive at
>>>>>>>> Nabble.com.
>>>>>>>>
>>>>>>>>
>>>>>>>> ---------------------------------------------------------------------
>>>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>> For additional commands, e-mail: users-
>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> ---------------------------------------------------------------------
>>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> --
>>>>>> View this message in context:
>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25767056.html
>>>>>> Sent from the Grizzly - Users mailing list archive at Nabble.com.
>>>>>>
>>>>>>
>>>>>> ---------------------------------------------------------------------
>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>>>
>>>>>
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>> --
>>> View this message in context:
>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25802994.html
>>> Sent from the Grizzly - Users mailing list archive at Nabble.com.
>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>
>>
>>
>
> --
> View this message in context: http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25817601.html
> Sent from the Grizzly - Users mailing list archive at Nabble.com.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>