Oh I get that, what about the org.apache.coyote.Adapter? If I want to
properly forward the request to proper managed servlet. I have an idea of
actually explicity calling a known servlet name by reflection, by this may
lead or break the server container state, not entirely sure.
BR,
Mohamed
Oleksiy Stashok wrote:
>
> Hi Mohamed,
>
> GrizzlyAdapter is just for HTTP based protocols, so it will probably
> not work in your case :(
>
>
>> This is my researc, but I would appreciate if you have time to give
>> me a
>> hand on this. I went through the WSTCPProtocolHandler, following the
>> request
>> it's passed to IncomeMessageProcessor where it's by it's turn starts a
>> ConnectionSession and TCPMessageListener, then it continue the journy
>> perhaps until it finally reachs the TCP109Adapter, this seems to be
>> bigger
>> than what I need due to all SOAP WS stuff and abstaction stuff. As
>> for my
>> case I only need to implement simple TCP protocol, if you can point
>> me to
>> simpler example or just tell me what are the general interfaces to
>> complete
>> the request life-cycle to for instance XTCPServlet, O would be
>> greatful.
> WSTCPProtocolHandler is the layer, where you need to implement custom
> logic. So IncomintMessageProcessor and farther classes should no be
> interested for you.
> When your ProtocolHandler is called - you know that it's the protocol
> you need, that some header bytes were read and you have a channel to
> deal with. So it's starting point to implement custom logic.
>
> WBR,
> Alexey.
>
>
>>
>> BR,
>> Mohamed
>>
>>
>> melshami wrote:
>>>
>>> Wow:) I would have never imagined it could be that silly. I thought
>>> I must
>>> be doing something terribly wrong.
>>>
>>> I will try now to do the actual TCP stuff.
>>>
>>> Thanks again.
>>>
>>>
>>> Oleksiy Stashok wrote:
>>>>
>>>> Oh, it's Grizzly issue, please use only lowercase letters in
>>>> protocol
>>>> name both in finder and handler.
>>>> This will be fixed in next Grizzly version.
>>>>
>>>> Thanks.
>>>>
>>>> WBR,
>>>> Alexey.
>>>>
>>>> On Oct 26, 2009, at 15:39 , melshami wrote:
>>>>
>>>>>
>>>>> Hi Alexey,
>>>>>
>>>>> Here is the project including the source for the handler and finder
>>>>> and the
>>>>> domain.xml. You will notice that I hardcoded the
>>>>> requestInfo.protocol and
>>>>> this is just for testing.
>>>>>
>>>>> BR,
>>>>> Mohamed
>>>>>
>>>>> Oleksiy Stashok wrote:
>>>>>>
>>>>>> Hi Mohamed,
>>>>>>
>>>>>> can you pls. share your code (finder and handler) and domain.xml?
>>>>>> I'll
>>>>>> check it.
>>>>>>
>>>>>> Thanks.
>>>>>>
>>>>>> WBR,
>>>>>> Alexey.
>>>>>>
>>>>>> On Oct 26, 2009, at 14:59 , melshami wrote:
>>>>>>
>>>>>>>
>>>>>>> Hi Alexey,
>>>>>>>
>>>>>>> Thanks for clarifying. I can see the
>>>>>>> XProtocolHandler.getProtocols()
>>>>>>> gets
>>>>>>> called and returns the matching protocol Id. But the handle
>>>>>>> method
>>>>>>> never
>>>>>>> gets called. Do you think it's something I do wrong with the
>>>>>>> client? Or is
>>>>>>> there any other configuration I should do for the http listener
>>>>>>> beside the
>>>>>>> -D..XProtocolFinders, -DXProtocolHandlers system properties?
>>>>>>>
>>>>>>> BR,
>>>>>>> Mohamed
>>>>>>>
>>>>>>>
>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>
>>>>>>>> Hi Mohamed,
>>>>>>>>
>>>>>>>>> Thanks very much for your help again. I spent fair amount of
>>>>>>>>> time
>>>>>>>>> until I
>>>>>>>>> got myself familiar with how this works. I was able to get a
>>>>>>>>> custom
>>>>>>>>> protocol
>>>>>>>>> finder to work. But I couldn't got the custom handler to
>>>>>>>>> work. I
>>>>>>>>> understand
>>>>>>>>> that the handler is mapped to the protocol once the
>>>>>>>>> protocolInfo.protocol is
>>>>>>>>> set by the finder. Which is what I did. My feeling is that this
>>>>>>>>> has
>>>>>>>>> to do
>>>>>>>>> with the proxiedProtocols which is how the TCP/SOAP is
>>>>>>>>> registered:
>>>>>>>>>
>>>>>>>>> supportedProtocols.put(
>>>>>>>>>
>>>>>>>>> "ws/
>>>>>>>>> tcp
>>>>>>>>> ","com.sun.xml.ws.transport.tcp.grizzly.WSTCPProtocolFinder");
>>>>>>>>>
>>>>>>>>> But I am also confused because it looks like the
>>>>>>>>> PortUnificationPipeline.PUTask iterates over each finder and
>>>>>>>>> finds
>>>>>>>>> the
>>>>>>>>> matching handler then invokes it's handle callback.
>>>>>>>> right. Finder is responsible for parsing the header and find
>>>>>>>> out if
>>>>>>>> it's known protocol. If yes - set protocolInfo.protocol some
>>>>>>>> unique
>>>>>>>> protocol name.
>>>>>>>> Handler in its turn has method String[] getProtocols(), which
>>>>>>>> should
>>>>>>>> return names of all protocols it supports.
>>>>>>>>
>>>>>>>> So binding should work, if finder will set
>>>>>>>> protocolInfo.protocol to
>>>>>>>> let's say "customProtocol" and some Handler will have String[]
>>>>>>>> getProtocols() implemented to return {"customProtocol", ...}.
>>>>>>>> In
>>>>>>>> this
>>>>>>>> case PortUnficiationPipeline will call handler's handle()
>>>>>>>> method.
>>>>>>>>
>>>>>>>>>
>>>>>>>>>> In GF v2.1, SOAP/TCP is configured internally via
>>>>>>>>>> proxiedProtocols
>>>>>>>>>> element, but it works only for known protocols, so is not
>>>>>>>>>> acceptable
>>>>>>>>>> for custom ones.
>>>>>>>>>
>>>>>>>>> Is this the reason? does this mean proxiedProtocols are only
>>>>>>>>> hardcoded? I
>>>>>>>>> hope there is a safe way to provide custom handler withouth the
>>>>>>>>> need
>>>>>>>>> to
>>>>>>>>> recompile or batch glassfish v2.1.
>>>>>>>> proxiedProtocols was used just to simplify configuration file
>>>>>>>> for
>>>>>>>> known protocols.
>>>>>>>>
>>>>>>>> Hope this will help.
>>>>>>>>
>>>>>>>> WBR,
>>>>>>>> Alexey.
>>>>>>>>
>>>>>>>>> I will keep looking, but your replies are always big life
>>>>>>>>> saver:)
>>>>>>>>>
>>>>>>>>> BR,
>>>>>>>>> Mohamed
>>>>>>>>>
>>>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>>>
>>>>>>>>>> Hi Mohamed,
>>>>>>>>>>
>>>>>>>>>>> I tried again on a fresh current build of glassfish and seems
>>>>>>>>>>> that
>>>>>>>>>>> the
>>>>>>>>>>> configuration works. But looks like I have to stik to
>>>>>>>>>>> glassfish
>>>>>>>>>>> v2.1
>>>>>>>>>>> as for
>>>>>>>>>>> a stable release. As I was testing SOAP/TCP today following
>>>>>>>>>>> instructions on
>>>>>>>>>>> your blog, I am curious to know how the
>>>>>>>>>>> com.sun.xml.ws.transport.tcp.grizzly.WSTCPProtocolHandler is
>>>>>>>>>>> configured in
>>>>>>>>>>> glassfishv2.1.
>>>>>>>>>> In GF v2.1, SOAP/TCP is configured internally via
>>>>>>>>>> proxiedProtocols
>>>>>>>>>> element, but it works only for known protocols, so is not
>>>>>>>>>> acceptable
>>>>>>>>>> for custom ones.
>>>>>>>>>>
>>>>>>>>>>> What I am trying to do is implement my own protocol handler
>>>>>>>>>>> in a way similar to WSIT SOAP TCP. What I understand is port
>>>>>>>>>>> unification was
>>>>>>>>>>> integrated since glassfishv2 but wasn't available through
>>>>>>>>>>> configuration as
>>>>>>>>>>> per current GFv3. Jean-Francois mention using jvm options as
>>>>>>>>>>> following:
>>>>>>>>>>>
>>>>>>>>>>> <jvm-options>-Dcom.sun.enterprise.web.connector.grizzly.protocolHandlers
>>>>>>>>>>> =
>>>>>>>>>>> com
>>>>>>>>>>> .sun
>>>>>>>>>>> .enterprise.web.portunif.protocols.http.HttpProtocolHandler</
>>>>>>>>>>> jvm-options>
>>>>>>>>>>> <jvm-options>-Dcom.sun.enterprise.web.connector.grizzly.protocolFinders
>>>>>>>>>>> =
>>>>>>>>>>> com
>>>>>>>>>>> .sun.enterprise.web.portunif.protocols.http.HttpsProtocolFinder
>>>>>>>>>>> ,
>>>>>>>>>>> com
>>>>>>>>>>> .sun.enterprise.web.portunif.protocols.http.HttpProtocolFinder
>>>>>>>>>>> </
>>>>>>>>>>> jvm-options>
>>>>>>>>>> Absolutely. That's what you'll need.
>>>>>>>>>> To provide custom Finder - just include it to System property
>>>>>>>>>> (jvm-
>>>>>>>>>> option) like:
>>>>>>>>>> <jvm-options>-
>>>>>>>>>> Dcom
>>>>>>>>>> .sun
>>>>>>>>>> .enterprise
>>>>>>>>>> .web.connector.grizzly.protocolFinders=com.sun.enterprise.web.portunif.protocols.http.HttpsProtocolFinder
>>>>>>>>>> ,com.sun.enterprise.web.portunif.protocols.http.HttpProtocolFinder
>>>>>>>>>> ,
>>>>>>>>>> my.custom.ProtocolFinder</jvm-options>
>>>>>>>>>> the same with the handler.
>>>>>>>>>>
>>>>>>>>>> Here are interfaces for GFv2.1 [1], [2].
>>>>>>>>>> Here are SOAP/TCP implementations [3], [4]. Though in your
>>>>>>>>>> finder
>>>>>>>>>> try
>>>>>>>>>> to avoid the additional reading from channel, which you see in
>>>>>>>>>> sample.
>>>>>>>>>>
>>>>>>>>>> WBR,
>>>>>>>>>> Alexey.
>>>>>>>>>>
>>>>>>>>>> [1]
>>>>>>>>>> https://grizzly.dev.java.net/source/browse/grizzly/trunk/code/extras/grizzly1.0/src/main/java/com/sun/enterprise/web/portunif/ProtocolFinder.java?rev=3149&view=markup
>>>>>>>>>> [2]
>>>>>>>>>> https://grizzly.dev.java.net/source/browse/grizzly/trunk/code/extras/grizzly1.0/src/main/java/com/sun/enterprise/web/portunif/ProtocolHandler.java?rev=3149&view=markup
>>>>>>>>>> [3]
>>>>>>>>>> http://fisheye5.cenqua.com/browse/wsit/wsit/rt/src/com/sun/xml/ws/transport/tcp/grizzly/WSTCPProtocolFinder.java?r=1.5
>>>>>>>>>> [4]
>>>>>>>>>> http://fisheye5.cenqua.com/browse/wsit/wsit/rt/src/com/sun/xml/ws/transport/tcp/grizzly/WSTCPProtocolHandler.java?r=1.9
>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Any pointers please?
>>>>>>>>>>>
>>>>>>>>>>> BR,
>>>>>>>>>>> Mohamed
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> Hi Mohamed,
>>>>>>>>>>>>
>>>>>>>>>>>> can you pls. send me your domain.xml?
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks.
>>>>>>>>>>>>
>>>>>>>>>>>> WBR,
>>>>>>>>>>>> Alexey.
>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks again for your reply. I normally run java -Xmx512m
>>>>>>>>>>>>> -jar
>>>>>>>>>>>>> ../glassfish/modules/glassfish.jar by default, exception
>>>>>>>>>>>>> above
>>>>>>>>>>>>> was
>>>>>>>>>>>>> captured
>>>>>>>>>>>>> from the console. I luanched glassfish again and compared
>>>>>>>>>>>>> server.log
>>>>>>>>>>>>> to the
>>>>>>>>>>>>> console, couldn't really find differences. I have attached
>>>>>>>>>>>>> server.log if you
>>>>>>>>>>>>> like to have a look. Thanks.
>>>>>>>>>>>>>
>>>>>>>>>>>>> BR,
>>>>>>>>>>>>> Mohamed http://www.nabble.com/file/p25817601/server.log
>>>>>>>>>>>>> server.log
>>>>>>>>>>>>>
>>>>>>>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi Mohamed,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Sorry for cross posting but I posted another question
>>>>>>>>>>>>>>> regarding
>>>>>>>>>>>>>>> TCP/
>>>>>>>>>>>>>>> SOAP in
>>>>>>>>>>>>>>> GlassFish here
>>>>>>>>>>>>>>> http://www.nabble.com/SOAP-TCP-has-been-integrated-to-Glassfish-V3-td25045927.html#a25045927
>>>>>>>>>>>>>>> .
>>>>>>>>>>>>>> Oh, it's difficult to follow all the forums :)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> After reading Paul's and your blog posts. I realise TCP-
>>>>>>>>>>>>>>> SOAP
>>>>>>>>>>>>>>> is
>>>>>>>>>>>>>>> already
>>>>>>>>>>>>>>> integrated,
>>>>>>>>>>>>>> That's true.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I can find soap-tcp.jar under the modules. I added a
>>>>>>>>>>>>>>> configuration similiar to the one you posted but
>>>>>>>>>>>>>>> Glassfish
>>>>>>>>>>>>>>> fails
>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>> start.
>>>>>>>>>>>>>> What exactly error you see?
>>>>>>>>>>>>>> Can you pls. run the GF is standalone mode like:
>>>>>>>>>>>>>> java -Xmx512m -jar ../glassfish/modules/glassfish.jar
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> cause there is some logging issue now, and you may not see
>>>>>>>>>>>>>> entire
>>>>>>>>>>>>>> log
>>>>>>>>>>>>>> in server.log file.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> WBR,
>>>>>>>>>>>>>> Alexey.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> melshami wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Thanks Alexey, I managed to install the bundle using
>>>>>>>>>>>>>>>> Flex
>>>>>>>>>>>>>>>> shell, I
>>>>>>>>>>>>>>>> think
>>>>>>>>>>>>>>>> in the current build there is no need to add other
>>>>>>>>>>>>>>>> paths to
>>>>>>>>>>>>>>>> felix.auto.start.1, now I will need to test the custom
>>>>>>>>>>>>>>>> filter:)
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> The exception is similiar to the previous one but I
>>>>>>>>>>>>>>>> don't
>>>>>>>>>>>>>>>> think
>>>>>>>>>>>>>>>> it's
>>>>>>>>>>>>>>>> ClassDefNotFound exception.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> java.lang.NullPointerException
>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>> com
>>>>>>>>>>>>>>>> .sun
>>>>>>>>>>>>>>>> .grizzly
>>>>>>>>>>>>>>>> .config
>>>>>>>>>>>>>>>> .GrizzlyServiceListener
>>>>>>>>>>>>>>>> .initializeListener(GrizzlyServiceListener.java:83)
>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>> com
>>>>>>>>>>>>>>>> .sun
>>>>>>>>>>>>>>>> .grizzly
>>>>>>>>>>>>>>>> .config
>>>>>>>>>>>>>>>> .GrizzlyServiceListener
>>>>>>>>>>>>>>>> .configure(GrizzlyServiceListener.java:
>>>>>>>>>>>>>>>> 77)
>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>> com
>>>>>>>>>>>>>>>> .sun
>>>>>>>>>>>>>>>> .enterprise
>>>>>>>>>>>>>>>> .v3
>>>>>>>>>>>>>>>> .services
>>>>>>>>>>>>>>>> .impl.GrizzlyListener.configure(GrizzlyListener.java:
>>>>>>>>>>>>>>>> 59)
>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>> com
>>>>>>>>>>>>>>>> .sun
>>>>>>>>>>>>>>>> .enterprise
>>>>>>>>>>>>>>>> .v3
>>>>>>>>>>>>>>>> .services
>>>>>>>>>>>>>>>> .impl.GrizzlyProxy.configureGrizzly(GrizzlyProxy.java:
>>>>>>>>>>>>>>>> 125)
>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>> com
>>>>>>>>>>>>>>>> .sun
>>>>>>>>>>>>>>>> .enterprise
>>>>>>>>>>>>>>>> .v3.services.impl.GrizzlyProxy.<init>(GrizzlyProxy.java:
>>>>>>>>>>>>>>>> 116)
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> BR,
>>>>>>>>>>>>>>>> Mohamed
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hello again :)
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> I see the changes is with network listener protocol
>>>>>>>>>>>>>>>>>> attribute
>>>>>>>>>>>>>>>>>> value
>>>>>>>>>>>>>>>>>> for the
>>>>>>>>>>>>>>>>>> http and admin listeners. I tested all possible
>>>>>>>>>>>>>>>>>> alternatives
>>>>>>>>>>>>>>>>>> before
>>>>>>>>>>>>>>>>>> bothering you with one more question:).
>>>>>>>>>>>>>>>>> Just to check, do you see any exceptions in a log?
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> btw I am using glassfish-v3-b66-windows version.
>>>>>>>>>>>>>>>>>> Could it
>>>>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>>>>> the a
>>>>>>>>>>>>>>>>>> problem
>>>>>>>>>>>>>>>>>> with this build?
>>>>>>>>>>>>>>>>> It should be fine, I believe.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> I have attached TCPProtcol.jar in case if you wanted
>>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>>> test it
>>>>>>>>>>>>>>>>>> yourself,
>>>>>>>>>>>>>>>>>> but I doubt it even reached the pointer where the
>>>>>>>>>>>>>>>>>> classes
>>>>>>>>>>>>>>>>>> were
>>>>>>>>>>>>>>>>>> loaded
>>>>>>>>>>>>>>>>>> http://www.nabble.com/file/p25767056/TCPProtocol.jar
>>>>>>>>>>>>>>>>>> TCPProtocol.jar
>>>>>>>>>>>>>>>>> Ok, how do you include jar above to a GF? :) IMO this
>>>>>>>>>>>>>>>>> is
>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>> issue.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> AFAIK you have to create osgi module from your jar and
>>>>>>>>>>>>>>>>> install
>>>>>>>>>>>>>>>>> it to
>>>>>>>>>>>>>>>>> GFv3.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> 1) How to create osgi module?
>>>>>>>>>>>>>>>>> Here I'm not big expert. You can take a look on
>>>>>>>>>>>>>>>>> internet, or
>>>>>>>>>>>>>>>>> check
>>>>>>>>>>>>>>>>> grizzly project's maven scripts to see how you can make
>>>>>>>>>>>>>>>>> osgi
>>>>>>>>>>>>>>>>> module.
>>>>>>>>>>>>>>>>> What I did with the jar you sent - is unpacked it and
>>>>>>>>>>>>>>>>> changed
>>>>>>>>>>>>>>>>> MANIFEST.MF file, so it looks like [1] and then
>>>>>>>>>>>>>>>>> repackaged
>>>>>>>>>>>>>>>>> jar
>>>>>>>>>>>>>>>>> file
>>>>>>>>>>>>>>>>> again.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> 2) Install osgi module to GFv3
>>>>>>>>>>>>>>>>> Not sure, may be it could be done easier way, but
>>>>>>>>>>>>>>>>> here are
>>>>>>>>>>>>>>>>> steps I
>>>>>>>>>>>>>>>>> did.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> 2.1) Enabled Felix shell for GFv3
>>>>>>>>>>>>>>>>> You can take a look here [2], but note that paths there
>>>>>>>>>>>>>>>>> are
>>>>>>>>>>>>>>>>> incorrect.
>>>>>>>>>>>>>>>>> Here are correct paths [3]
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> 2.2) Install osgi module
>>>>>>>>>>>>>>>>> Please look at [4], starting from step 5, but run
>>>>>>>>>>>>>>>>> glassfish
>>>>>>>>>>>>>>>>> using
>>>>>>>>>>>>>>>>> (suppose you're in glassfishv3/bin folder)
>>>>>>>>>>>>>>>>> java -Xmx512m -jar ../glassfish/modules/glassfish.jar
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> 2.3) Done
>>>>>>>>>>>>>>>>> After installing osgi module, restart GFv3 - it should
>>>>>>>>>>>>>>>>> work.
>>>>>>>>>>>>>>>>> Seems it works for me.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Thanks.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> WBR,
>>>>>>>>>>>>>>>>> Alexey.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> [1]
>>>>>>>>>>>>>>>>> Manifest-Version: 1.0
>>>>>>>>>>>>>>>>> Ant-Version: Apache Ant 1.7.1
>>>>>>>>>>>>>>>>> Created-By: 14.0-b16 (Sun Microsystems Inc.)
>>>>>>>>>>>>>>>>> X-COMMENT: Main-Class will be added automatically by
>>>>>>>>>>>>>>>>> build
>>>>>>>>>>>>>>>>> Export-Package: scedev.grizzly.protocols
>>>>>>>>>>>>>>>>> implementation-version: 0.1
>>>>>>>>>>>>>>>>> package: scedev.grizzly.protocols
>>>>>>>>>>>>>>>>> Bundle-Name: scedev-grizzly
>>>>>>>>>>>>>>>>> Bundle-Vendor: scedev
>>>>>>>>>>>>>>>>> Bundle-Version: 0.1
>>>>>>>>>>>>>>>>> Bnd-LastModified: 1254747835722
>>>>>>>>>>>>>>>>> Bundle-ManifestVersion: 2
>>>>>>>>>>>>>>>>> Bundle-SymbolicName: scedev.grizzly.protocols
>>>>>>>>>>>>>>>>> Import-Package:
>>>>>>>>>>>>>>>>> com
>>>>>>>>>>>>>>>>> .sun
>>>>>>>>>>>>>>>>> .grizzly
>>>>>>>>>>>>>>>>> ,com
>>>>>>>>>>>>>>>>> .sun
>>>>>>>>>>>>>>>>> .grizzly
>>>>>>>>>>>>>>>>> .filter
>>>>>>>>>>>>>>>>> ,com
>>>>>>>>>>>>>>>>> .sun
>>>>>>>>>>>>>>>>> .grizzly
>>>>>>>>>>>>>>>>> .http
>>>>>>>>>>>>>>>>> ,com
>>>>>>>>>>>>>>>>> .sun
>>>>>>>>>>>>>>>>> .grizzly
>>>>>>>>>>>>>>>>> .http
>>>>>>>>>>>>>>>>> .portunif,com.sun.grizzly.portunif,com.sun.grizzly.util
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> [2]
>>>>>>>>>>>>>>>>> http://blogs.sun.com/arungupta/entry/totd_34_using_felix_shell
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> [3] felix.auto.start.1= \
>>>>>>>>>>>>>>>>> reference:${com.sun.aas.installRootURI}modules/osgi-
>>>>>>>>>>>>>>>>> main.jar\
>>>>>>>>>>>>>>>>> ${com.sun.aas.installRootURI}modules/
>>>>>>>>>>>>>>>>> org.apache.felix.shell.jar \
>>>>>>>>>>>>>>>>> ${com.sun.aas.installRootURI}modules/
>>>>>>>>>>>>>>>>> org.apache.felix.shell.tui.jar
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> [4]
>>>>>>>>>>>>>>>>> http://blogs.sun.com/arungupta/entry/totd_36_deploy_osgi_bundles
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Hi Mohamed,
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> my fault, please try following config:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> <network-config>
>>>>>>>>>>>>>>>>>>> <protocols>
>>>>>>>>>>>>>>>>>>> <protocol name="pu-protocol">
>>>>>>>>>>>>>>>>>>> <port-unification>
>>>>>>>>>>>>>>>>>>> <protocol-finder protocol="http"
>>>>>>>>>>>>>>>>>>> classname
>>>>>>>>>>>>>>>>>>> ="com.sun.grizzly.http.portunif.HttpProtocolFinder"
>>>>>>>>>>>>>>>>>>> name="http-finder" />
>>>>>>>>>>>>>>>>>>> <protocol-finder protocol="rpc"
>>>>>>>>>>>>>>>>>>> classname
>>>>>>>>>>>>>>>>>>> ="scedev.grizzly.protocols.TCPProtocolFinder"
>>>>>>>>>>>>>>>>>>> name="rpc-
>>>>>>>>>>>>>>>>>>> protocol-finder" />
>>>>>>>>>>>>>>>>>>> </port-unification>
>>>>>>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>>>>>> <protocol name="http">
>>>>>>>>>>>>>>>>>>> <http max-connections="250" default-virtual-
>>>>>>>>>>>>>>>>>>> server="server" server-name="" />
>>>>>>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>>>>>> <protocol name="rpc">
>>>>>>>>>>>>>>>>>>> <protocol-chain-instance-handler>
>>>>>>>>>>>>>>>>>>> <protocol-chain>
>>>>>>>>>>>>>>>>>>> <protocol-filter
>>>>>>>>>>>>>>>>>>> classname
>>>>>>>>>>>>>>>>>>> ="scedev.grizzly.protocols.TCPProtocolFilter"
>>>>>>>>>>>>>>>>>>> name="rpc-
>>>>>>>>>>>>>>>>>>> filter" />
>>>>>>>>>>>>>>>>>>> </protocol-chain>
>>>>>>>>>>>>>>>>>>> </protocol-chain-instance-handler>
>>>>>>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>>>>>> <protocol name="http-listener-1">
>>>>>>>>>>>>>>>>>>> <http max-connections="250" default-virtual-
>>>>>>>>>>>>>>>>>>> server="server" server-name="">
>>>>>>>>>>>>>>>>>>> <file-cache enabled="false" />
>>>>>>>>>>>>>>>>>>> </http>
>>>>>>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>>>>>> <protocol security-enabled="true" name="http-
>>>>>>>>>>>>>>>>>>> listener-2">
>>>>>>>>>>>>>>>>>>> <http max-connections="250" default-virtual-
>>>>>>>>>>>>>>>>>>> server="server" server-name="">
>>>>>>>>>>>>>>>>>>> <file-cache enabled="false" />
>>>>>>>>>>>>>>>>>>> </http>
>>>>>>>>>>>>>>>>>>> <ssl ssl3-enabled="false" cert-
>>>>>>>>>>>>>>>>>>> nickname="s1as" />
>>>>>>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>>>>>> <protocol name="admin-listener">
>>>>>>>>>>>>>>>>>>> <http max-connections="250" default-virtual-
>>>>>>>>>>>>>>>>>>> server="__asadmin" server-name="">
>>>>>>>>>>>>>>>>>>> <file-cache enabled="false" />
>>>>>>>>>>>>>>>>>>> </http>
>>>>>>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>>>>>> </protocols>
>>>>>>>>>>>>>>>>>>> <network-listeners>
>>>>>>>>>>>>>>>>>>> <network-listener port="8787" protocol="pu-
>>>>>>>>>>>>>>>>>>> protocol"
>>>>>>>>>>>>>>>>>>> transport="tcp" name="tcprpc-listener" thread-
>>>>>>>>>>>>>>>>>>> pool="thread-
>>>>>>>>>>>>>>>>>>> pool-1" />
>>>>>>>>>>>>>>>>>>> <network-listener port="8080" protocol="http-
>>>>>>>>>>>>>>>>>>> listener-1"
>>>>>>>>>>>>>>>>>>> transport="tcp" name="http-listener-1" thread-
>>>>>>>>>>>>>>>>>>> pool="http-
>>>>>>>>>>>>>>>>>>> thread-
>>>>>>>>>>>>>>>>>>> pool" />
>>>>>>>>>>>>>>>>>>> <network-listener port="4848" protocol="admin-
>>>>>>>>>>>>>>>>>>> listener"
>>>>>>>>>>>>>>>>>>> transport="tcp" name="admin-listener" thread-
>>>>>>>>>>>>>>>>>>> pool="thread-
>>>>>>>>>>>>>>>>>>> pool-1" />
>>>>>>>>>>>>>>>>>>> </network-listeners>
>>>>>>>>>>>>>>>>>>> <transports>
>>>>>>>>>>>>>>>>>>> <transport name="tcp" />
>>>>>>>>>>>>>>>>>>> </transports>
>>>>>>>>>>>>>>>>>>> </network-config>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> WBR,
>>>>>>>>>>>>>>>>>>> Alexey.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> On Oct 6, 2009, at 12:53 , melshami wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Hi Alexey,
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Thanks for bearing with me, still no luck. I tried
>>>>>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>>>>>> suggestion
>>>>>>>>>>>>>>>>>>>> and I
>>>>>>>>>>>>>>>>>>>> tried different variations of configuration protocol
>>>>>>>>>>>>>>>>>>>> element.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> here is my current configuration:
>>>>>>>>>>>>>>>>>>>> <network-config>
>>>>>>>>>>>>>>>>>>>> <protocols>
>>>>>>>>>>>>>>>>>>>> <protocol name="pu-protocol">
>>>>>>>>>>>>>>>>>>>> <port-unification>
>>>>>>>>>>>>>>>>>>>> <protocol-finder protocol="http"
>>>>>>>>>>>>>>>>>>>> classname
>>>>>>>>>>>>>>>>>>>> ="com.sun.grizzly.http.portunif.HttpProtocolFinder"
>>>>>>>>>>>>>>>>>>>> name="http-finder" />
>>>>>>>>>>>>>>>>>>>> <protocol-finder protocol="rpc"
>>>>>>>>>>>>>>>>>>>> classname
>>>>>>>>>>>>>>>>>>>> ="scedev.grizzly.protocols.TCPProtocolFinder"
>>>>>>>>>>>>>>>>>>>> name="rpc-protocol-finder" />
>>>>>>>>>>>>>>>>>>>> </port-unification>
>>>>>>>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>>>>>>> <protocol name="http" />
>>>>>>>>>>>>>>>>>>>> <protocol name="rpc">
>>>>>>>>>>>>>>>>>>>> <protocol-chain-instance-handler>
>>>>>>>>>>>>>>>>>>>> <protocol-chain>
>>>>>>>>>>>>>>>>>>>> <protocol-filter
>>>>>>>>>>>>>>>>>>>> classname
>>>>>>>>>>>>>>>>>>>> ="scedev.grizzly.protocols.TCPProtocolFilter"
>>>>>>>>>>>>>>>>>>>> name="rpc-
>>>>>>>>>>>>>>>>>>>> filter" />
>>>>>>>>>>>>>>>>>>>> </protocol-chain>
>>>>>>>>>>>>>>>>>>>> </protocol-chain-instance-handler>
>>>>>>>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>>>>>>> <protocol name="http-listener-1">
>>>>>>>>>>>>>>>>>>>> <http max-connections="250" default-virtual-
>>>>>>>>>>>>>>>>>>>> server="server"
>>>>>>>>>>>>>>>>>>>> server-name="">
>>>>>>>>>>>>>>>>>>>> <file-cache enabled="false" />
>>>>>>>>>>>>>>>>>>>> </http>
>>>>>>>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>>>>>>> <protocol security-enabled="true" name="http-
>>>>>>>>>>>>>>>>>>>> listener-2">
>>>>>>>>>>>>>>>>>>>> <http max-connections="250" default-virtual-
>>>>>>>>>>>>>>>>>>>> server="server"
>>>>>>>>>>>>>>>>>>>> server-name="">
>>>>>>>>>>>>>>>>>>>> <file-cache enabled="false" />
>>>>>>>>>>>>>>>>>>>> </http>
>>>>>>>>>>>>>>>>>>>> <ssl ssl3-enabled="false" cert-nickname="s1as" />
>>>>>>>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>>>>>>> <protocol name="admin-listener">
>>>>>>>>>>>>>>>>>>>> <http max-connections="250" default-virtual-
>>>>>>>>>>>>>>>>>>>> server="__asadmin"
>>>>>>>>>>>>>>>>>>>> server-name="">
>>>>>>>>>>>>>>>>>>>> <file-cache enabled="false" />
>>>>>>>>>>>>>>>>>>>> </http>
>>>>>>>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>>>>>>> </protocols>
>>>>>>>>>>>>>>>>>>>> <network-listeners>
>>>>>>>>>>>>>>>>>>>> <network-listener port="8787" protocol="pu-
>>>>>>>>>>>>>>>>>>>> protocol"
>>>>>>>>>>>>>>>>>>>> transport="tcp" name="tcprpc-listener" thread-
>>>>>>>>>>>>>>>>>>>> pool="thread-
>>>>>>>>>>>>>>>>>>>> pool-1" />
>>>>>>>>>>>>>>>>>>>> <network-listener port="8080" protocol="pu-
>>>>>>>>>>>>>>>>>>>> protocol"
>>>>>>>>>>>>>>>>>>>> transport="tcp" name="http-listener-1" thread-
>>>>>>>>>>>>>>>>>>>> pool="http-
>>>>>>>>>>>>>>>>>>>> thread-
>>>>>>>>>>>>>>>>>>>> pool" />
>>>>>>>>>>>>>>>>>>>> <network-listener port="4848" protocol="pu-
>>>>>>>>>>>>>>>>>>>> protocol"
>>>>>>>>>>>>>>>>>>>> transport="tcp" name="admin-listener" thread-
>>>>>>>>>>>>>>>>>>>> pool="thread-
>>>>>>>>>>>>>>>>>>>> pool-1" />
>>>>>>>>>>>>>>>>>>>> </network-listeners>
>>>>>>>>>>>>>>>>>>>> <transports>
>>>>>>>>>>>>>>>>>>>> <transport name="tcp" />
>>>>>>>>>>>>>>>>>>>> </transports>
>>>>>>>>>>>>>>>>>>>> </network-config>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> Hi Mohamed,
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> hmm, this is a bug - I'll fix it for coming GF
>>>>>>>>>>>>>>>>>>>>> release.
>>>>>>>>>>>>>>>>>>>>> Meanwhile you can workaround this issue by
>>>>>>>>>>>>>>>>>>>>> declaring
>>>>>>>>>>>>>>>>>>>>> http
>>>>>>>>>>>>>>>>>>>>> protocol,
>>>>>>>>>>>>>>>>>>>>> within the port unification declaration, together
>>>>>>>>>>>>>>>>>>>>> with
>>>>>>>>>>>>>>>>>>>>> rpc
>>>>>>>>>>>>>>>>>>>>> protocol,
>>>>>>>>>>>>>>>>>>>>> like:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> <protocol name="pu-protocol">
>>>>>>>>>>>>>>>>>>>>> <port-unification>
>>>>>>>>>>>>>>>>>>>>> <protocol-finder name="http-finder"
>>>>>>>>>>>>>>>>>>>>> classname
>>>>>>>>>>>>>>>>>>>>> ="com.sun.grizzly.http.portunif.HttpProtocolFinder"
>>>>>>>>>>>>>>>>>>>>> protocol="http"/>
>>>>>>>>>>>>>>>>>>>>> <protocol-finder name="rpc-protocol-finder"
>>>>>>>>>>>>>>>>>>>>> classname
>>>>>>>>>>>>>>>>>>>>> ="scedev.grizzly.protocols.TCPProtocolFinder"
>>>>>>>>>>>>>>>>>>>>> protocol="rpc"/>
>>>>>>>>>>>>>>>>>>>>> </port-unification>
>>>>>>>>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> <protocol name="http">
>>>>>>>>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> WBR,
>>>>>>>>>>>>>>>>>>>>> Alexey.
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> On Oct 6, 2009, at 10:55 , melshami wrote:
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Hi Alexey,
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> I Can't seem to get this right, here is my
>>>>>>>>>>>>>>>>>>>>>> configuration:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> <network-config>
>>>>>>>>>>>>>>>>>>>>>> <protocols>
>>>>>>>>>>>>>>>>>>>>>> <protocol name="pu-protocol">
>>>>>>>>>>>>>>>>>>>>>> <port-unification>
>>>>>>>>>>>>>>>>>>>>>> <protocol-finder protocol="rpc" name="rpc-
>>>>>>>>>>>>>>>>>>>>>> protocol-
>>>>>>>>>>>>>>>>>>>>>> finder"
>>>>>>>>>>>>>>>>>>>>>> classname
>>>>>>>>>>>>>>>>>>>>>> ="scedev.grizzly.protocols.TCPProtocolFinder" />
>>>>>>>>>>>>>>>>>>>>>> </port-unification>
>>>>>>>>>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>>>>>>>>> <protocol name="rpc">
>>>>>>>>>>>>>>>>>>>>>> <protocol-chain-instance-handler>
>>>>>>>>>>>>>>>>>>>>>> <protocol-chain>
>>>>>>>>>>>>>>>>>>>>>> <protocol-filter name="rpc"
>>>>>>>>>>>>>>>>>>>>>> classname
>>>>>>>>>>>>>>>>>>>>>> ="scedev.grizzly.protocols.TCPProtocolFilter" />
>>>>>>>>>>>>>>>>>>>>>> </protocol-chain>
>>>>>>>>>>>>>>>>>>>>>> </protocol-chain-instance-handler>
>>>>>>>>>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>>>>>>>>> <protocol name="http-listener-1">
>>>>>>>>>>>>>>>>>>>>>> <http default-virtual-server="server" max-
>>>>>>>>>>>>>>>>>>>>>> connections="250"
>>>>>>>>>>>>>>>>>>>>>> server-name="">
>>>>>>>>>>>>>>>>>>>>>> <file-cache enabled="false" />
>>>>>>>>>>>>>>>>>>>>>> </http>
>>>>>>>>>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>>>>>>>>> <protocol security-enabled="true" name="http-
>>>>>>>>>>>>>>>>>>>>>> listener-2">
>>>>>>>>>>>>>>>>>>>>>> <http default-virtual-server="server" max-
>>>>>>>>>>>>>>>>>>>>>> connections="250"
>>>>>>>>>>>>>>>>>>>>>> server-name="">
>>>>>>>>>>>>>>>>>>>>>> <file-cache enabled="false" />
>>>>>>>>>>>>>>>>>>>>>> </http>
>>>>>>>>>>>>>>>>>>>>>> <ssl ssl3-enabled="false" cert-
>>>>>>>>>>>>>>>>>>>>>> nickname="s1as" />
>>>>>>>>>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>>>>>>>>> <protocol name="admin-listener">
>>>>>>>>>>>>>>>>>>>>>> <http default-virtual-server="__asadmin" max-
>>>>>>>>>>>>>>>>>>>>>> connections="250"
>>>>>>>>>>>>>>>>>>>>>> server-name="">
>>>>>>>>>>>>>>>>>>>>>> <file-cache enabled="false" />
>>>>>>>>>>>>>>>>>>>>>> </http>
>>>>>>>>>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>>>>>>>>> </protocols>
>>>>>>>>>>>>>>>>>>>>>> <network-listeners>
>>>>>>>>>>>>>>>>>>>>>> <network-listener port="8787" protocol="pu-
>>>>>>>>>>>>>>>>>>>>>> protocol"
>>>>>>>>>>>>>>>>>>>>>> transport="tcp" name="tcprpc-listener" thread-
>>>>>>>>>>>>>>>>>>>>>> pool="http-
>>>>>>>>>>>>>>>>>>>>>> thread-
>>>>>>>>>>>>>>>>>>>>>> pool" />
>>>>>>>>>>>>>>>>>>>>>> <network-listener port="8080" protocol="http-
>>>>>>>>>>>>>>>>>>>>>> listener-1"
>>>>>>>>>>>>>>>>>>>>>> transport="tcp" name="http-listener-1" thread-
>>>>>>>>>>>>>>>>>>>>>> pool="http-
>>>>>>>>>>>>>>>>>>>>>> thread-
>>>>>>>>>>>>>>>>>>>>>> pool" />
>>>>>>>>>>>>>>>>>>>>>> <network-listener port="8181" protocol="http-
>>>>>>>>>>>>>>>>>>>>>> listener-2"
>>>>>>>>>>>>>>>>>>>>>> transport="tcp" name="http-listener-2" thread-
>>>>>>>>>>>>>>>>>>>>>> pool="http-
>>>>>>>>>>>>>>>>>>>>>> thread-
>>>>>>>>>>>>>>>>>>>>>> pool" />
>>>>>>>>>>>>>>>>>>>>>> <network-listener port="4848" protocol="admin-
>>>>>>>>>>>>>>>>>>>>>> listener"
>>>>>>>>>>>>>>>>>>>>>> transport="tcp" name="admin-listener" thread-
>>>>>>>>>>>>>>>>>>>>>> pool="http-
>>>>>>>>>>>>>>>>>>>>>> thread-
>>>>>>>>>>>>>>>>>>>>>> pool" />
>>>>>>>>>>>>>>>>>>>>>> </network-listeners>
>>>>>>>>>>>>>>>>>>>>>> <transports>
>>>>>>>>>>>>>>>>>>>>>> <transport name="tcp" />
>>>>>>>>>>>>>>>>>>>>>> </transports>
>>>>>>>>>>>>>>>>>>>>>> </network-config>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> GlassFish won't start due to this exception:
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> #|2009-10-06T09:48:46.654+0100|SEVERE|glassfish|
>>>>>>>>>>>>>>>>>>>>>> null|
>>>>>>>>>>>>>>>>>>>>>> _ThreadID=11;_ThreadName=Thread-3;|Unable
>>>>>>>>>>>>>>>>>>>>>> to start v3. Closing all ports
>>>>>>>>>>>>>>>>>>>>>> java.lang.NullPointerException
>>>>>>>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>>>>>>>> com
>>>>>>>>>>>>>>>>>>>>>> .sun
>>>>>>>>>>>>>>>>>>>>>> .grizzly
>>>>>>>>>>>>>>>>>>>>>> .config
>>>>>>>>>>>>>>>>>>>>>> .GrizzlyServiceListener
>>>>>>>>>>>>>>>>>>>>>> .initializeListener(GrizzlyServiceListener.java:
>>>>>>>>>>>>>>>>>>>>>> 83)
>>>>>>>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>>>>>>>> com
>>>>>>>>>>>>>>>>>>>>>> .sun
>>>>>>>>>>>>>>>>>>>>>> .grizzly
>>>>>>>>>>>>>>>>>>>>>> .config
>>>>>>>>>>>>>>>>>>>>>> .GrizzlyServiceListener
>>>>>>>>>>>>>>>>>>>>>> .configure(GrizzlyServiceListener.java:
>>>>>>>>>>>>>>>>>>>>>> 77)
>>>>>>>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>>>>>>>> com
>>>>>>>>>>>>>>>>>>>>>> .sun
>>>>>>>>>>>>>>>>>>>>>> .enterprise
>>>>>>>>>>>>>>>>>>>>>> .v3
>>>>>>>>>>>>>>>>>>>>>> .services
>>>>>>>>>>>>>>>>>>>>>> .impl
>>>>>>>>>>>>>>>>>>>>>> .GrizzlyListener.configure(GrizzlyListener.java:
>>>>>>>>>>>>>>>>>>>>>> 59)
>>>>>>>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>>>>>>>> com
>>>>>>>>>>>>>>>>>>>>>> .sun
>>>>>>>>>>>>>>>>>>>>>> .enterprise
>>>>>>>>>>>>>>>>>>>>>> .v3
>>>>>>>>>>>>>>>>>>>>>> .services
>>>>>>>>>>>>>>>>>>>>>> .impl
>>>>>>>>>>>>>>>>>>>>>> .GrizzlyProxy.configureGrizzly(GrizzlyProxy.java:
>>>>>>>>>>>>>>>>>>>>>> 125)
>>>>>>>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>>>>>>>> com
>>>>>>>>>>>>>>>>>>>>>> .sun
>>>>>>>>>>>>>>>>>>>>>> .enterprise
>>>>>>>>>>>>>>>>>>>>>> .v3
>>>>>>>>>>>>>>>>>>>>>> .services
>>>>>>>>>>>>>>>>>>>>>> .impl.GrizzlyProxy.<init>(GrizzlyProxy.java:
>>>>>>>>>>>>>>>>>>>>>> 116)
>>>>>>>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>>>>>>>> com
>>>>>>>>>>>>>>>>>>>>>> .sun
>>>>>>>>>>>>>>>>>>>>>> .enterprise
>>>>>>>>>>>>>>>>>>>>>> .v3
>>>>>>>>>>>>>>>>>>>>>> .services
>>>>>>>>>>>>>>>>>>>>>> .impl
>>>>>>>>>>>>>>>>>>>>>> .GrizzlyService
>>>>>>>>>>>>>>>>>>>>>> .createNetworkProxy(GrizzlyService.java:
>>>>>>>>>>>>>>>>>>>>>> 344)
>>>>>>>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>>>>>>>> com
>>>>>>>>>>>>>>>>>>>>>> .sun
>>>>>>>>>>>>>>>>>>>>>> .enterprise
>>>>>>>>>>>>>>>>>>>>>> .v3
>>>>>>>>>>>>>>>>>>>>>> .services
>>>>>>>>>>>>>>>>>>>>>> .impl
>>>>>>>>>>>>>>>>>>>>>> .GrizzlyService.postConstruct(GrizzlyService.java:
>>>>>>>>>>>>>>>>>>>>>> 266)
>>>>>>>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>>>>>>>> com
>>>>>>>>>>>>>>>>>>>>>> .sun
>>>>>>>>>>>>>>>>>>>>>> .hk2
>>>>>>>>>>>>>>>>>>>>>> .component
>>>>>>>>>>>>>>>>>>>>>> .AbstractWombImpl.inject(AbstractWombImpl.java:
>>>>>>>>>>>>>>>>>>>>>> 174)
>>>>>>>>>>>>>>>>>>>>>> at com.sun.hk2.component.ConstructorWomb
>>>>>>>>>>>>>>>>>>>>>> $1.run(ConstructorWomb.java:
>>>>>>>>>>>>>>>>>>>>>> 91)
>>>>>>>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>>>>>>>> java.security.AccessController.doPrivileged(Native
>>>>>>>>>>>>>>>>>>>>>> Method)
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> I have set the classpath for the custom protocol
>>>>>>>>>>>>>>>>>>>>>> filter
>>>>>>>>>>>>>>>>>>>>>> and
>>>>>>>>>>>>>>>>>>>>>> finder
>>>>>>>>>>>>>>>>>>>>>> in the
>>>>>>>>>>>>>>>>>>>>>> JVM classpath settings.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Is there anything else I am missing?
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>>>>>>>>> Mohamed
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> melshami wrote:
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> It's not a problem at all, am still testing we
>>>>>>>>>>>>>>>>>>>>>>> have
>>>>>>>>>>>>>>>>>>>>>>> enough
>>>>>>>>>>>>>>>>>>>>>>> time
>>>>>>>>>>>>>>>>>>>>>>> before
>>>>>>>>>>>>>>>>>>>>>>> production so I hope there will be a new release
>>>>>>>>>>>>>>>>>>>>>>> soon. I
>>>>>>>>>>>>>>>>>>>>>>> will try
>>>>>>>>>>>>>>>>>>>>>>> that and
>>>>>>>>>>>>>>>>>>>>>>> will get back to you.
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Thanks for your help:)
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> I think since I am using glassfish-prelude v3
>>>>>>>>>>>>>>>>>>>>>>>>> it
>>>>>>>>>>>>>>>>>>>>>>>>> still
>>>>>>>>>>>>>>>>>>>>>>>>> uses v2
>>>>>>>>>>>>>>>>>>>>>>>>> configuraiton
>>>>>>>>>>>>>>>>>>>>>>>>> scheme, if I am correct it's sun-domain_1_3.dtd
>>>>>>>>>>>>>>>>>>>>>>>>> which
>>>>>>>>>>>>>>>>>>>>>>>>> has
>>>>>>>>>>>>>>>>>>>>>>>>> all
>>>>>>>>>>>>>>>>>>>>>>>>> network
>>>>>>>>>>>>>>>>>>>>>>>>> configuration under the <http-service> element.
>>>>>>>>>>>>>>>>>>>>>>>>> So I
>>>>>>>>>>>>>>>>>>>>>>>>> am
>>>>>>>>>>>>>>>>>>>>>>>>> not
>>>>>>>>>>>>>>>>>>>>>>>>> sure
>>>>>>>>>>>>>>>>>>>>>>>>> where to
>>>>>>>>>>>>>>>>>>>>>>>>> set the protocol-finder name under this scheme.
>>>>>>>>>>>>>>>>>>>>>>>> I think there is no way to use port unification
>>>>>>>>>>>>>>>>>>>>>>>> with
>>>>>>>>>>>>>>>>>>>>>>>> prelude :(
>>>>>>>>>>>>>>>>>>>>>>>> Will it be a problem for you to use latest
>>>>>>>>>>>>>>>>>>>>>>>> promoted
>>>>>>>>>>>>>>>>>>>>>>>> GFv3
>>>>>>>>>>>>>>>>>>>>>>>> [1]?
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> Thanks.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> WBR,
>>>>>>>>>>>>>>>>>>>>>>>> Alexey.
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> [1] http://download.java.net/glassfish/v3/promoted/
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>>>>>>>> Mohamed
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> you can take a look at config module in
>>>>>>>>>>>>>>>>>>>>>>>>>> grizzly
>>>>>>>>>>>>>>>>>>>>>>>>>> workspace
>>>>>>>>>>>>>>>>>>>>>>>>>> [1].
>>>>>>>>>>>>>>>>>>>>>>>>>> There you can find unit tests with different
>>>>>>>>>>>>>>>>>>>>>>>>>> configurations
>>>>>>>>>>>>>>>>>>>>>>>>>> like
>>>>>>>>>>>>>>>>>>>>>>>>>> [2],
>>>>>>>>>>>>>>>>>>>>>>>>>> which actually has port unification enabled,
>>>>>>>>>>>>>>>>>>>>>>>>>> but
>>>>>>>>>>>>>>>>>>>>>>>>>> you
>>>>>>>>>>>>>>>>>>>>>>>>>> can
>>>>>>>>>>>>>>>>>>>>>>>>>> redefine
>>>>>>>>>>>>>>>>>>>>>>>>>> config to use X-protocol directly without port
>>>>>>>>>>>>>>>>>>>>>>>>>> unification.
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> WBR,
>>>>>>>>>>>>>>>>>>>>>>>>>> Alexey.
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> [1] svn checkout
>>>>>>>>>>>>>>>>>>>>>>>>>> https://www.dev.java.net/svn/grizzly/trunk/code/modules/config
>>>>>>>>>>>>>>>>>>>>>>>>>> [2]
>>>>>>>>>>>>>>>>>>>>>>>>>> <network-config>
>>>>>>>>>>>>>>>>>>>>>>>>>> <transports>
>>>>>>>>>>>>>>>>>>>>>>>>>> <transport name="tcp"/>
>>>>>>>>>>>>>>>>>>>>>>>>>> </transports>
>>>>>>>>>>>>>>>>>>>>>>>>>> <protocols>
>>>>>>>>>>>>>>>>>>>>>>>>>> <protocol name="pu-protocol">
>>>>>>>>>>>>>>>>>>>>>>>>>> <port-unification>
>>>>>>>>>>>>>>>>>>>>>>>>>> <protocol-finder name="http-finder"
>>>>>>>>>>>>>>>>>>>>>>>>>> classname
>>>>>>>>>>>>>>>>>>>>>>>>>> =
>>>>>>>>>>>>>>>>>>>>>>>>>> "com
>>>>>>>>>>>>>>>>>>>>>>>>>> .sun.grizzly.http.portunif.HttpProtocolFinder"
>>>>>>>>>>>>>>>>>>>>>>>>>> protocol="http"/>
>>>>>>>>>>>>>>>>>>>>>>>>>> <protocol-finder name="X-protocol-
>>>>>>>>>>>>>>>>>>>>>>>>>> finder"
>>>>>>>>>>>>>>>>>>>>>>>>>> classname
>>>>>>>>>>>>>>>>>>>>>>>>>> ="com.sun.grizzly.config.XProtocolFinder"
>>>>>>>>>>>>>>>>>>>>>>>>>> protocol="X-
>>>>>>>>>>>>>>>>>>>>>>>>>> protocol"/>
>>>>>>>>>>>>>>>>>>>>>>>>>> </port-unification>
>>>>>>>>>>>>>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> <protocol name="http">
>>>>>>>>>>>>>>>>>>>>>>>>>> <http enable-comet-support="true"/>
>>>>>>>>>>>>>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> <protocol name="X-protocol">
>>>>>>>>>>>>>>>>>>>>>>>>>> <protocol-chain-instance-handler>
>>>>>>>>>>>>>>>>>>>>>>>>>> <protocol-chain>
>>>>>>>>>>>>>>>>>>>>>>>>>> <protocol-filter name="x-filter"
>>>>>>>>>>>>>>>>>>>>>>>>>> classname
>>>>>>>>>>>>>>>>>>>>>>>>>> ="com.sun.grizzly.config.XProtocolFilter"/>
>>>>>>>>>>>>>>>>>>>>>>>>>> </protocol-chain>
>>>>>>>>>>>>>>>>>>>>>>>>>> </protocol-chain-instance-handler>
>>>>>>>>>>>>>>>>>>>>>>>>>> </protocol>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> </protocols>
>>>>>>>>>>>>>>>>>>>>>>>>>> <network-listeners>
>>>>>>>>>>>>>>>>>>>>>>>>>> <thread-pool name="defaultThreadPool"/>
>>>>>>>>>>>>>>>>>>>>>>>>>> <network-listener name="http-listener"
>>>>>>>>>>>>>>>>>>>>>>>>>> port="38082"
>>>>>>>>>>>>>>>>>>>>>>>>>> transport="tcp" protocol="pu-protocol" thread-
>>>>>>>>>>>>>>>>>>>>>>>>>> pool="defaultThreadPool"/>
>>>>>>>>>>>>>>>>>>>>>>>>>> </network-listeners>
>>>>>>>>>>>>>>>>>>>>>>>>>> </network-config>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>> On Oct 5, 2009, at 15:14 , melshami wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Alexey,
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks very much for the prompt reply. I am a
>>>>>>>>>>>>>>>>>>>>>>>>>>> bit
>>>>>>>>>>>>>>>>>>>>>>>>>>> confused to
>>>>>>>>>>>>>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>>>>>>>>>>>>>> honest
>>>>>>>>>>>>>>>>>>>>>>>>>>> since I am new to Grizzly. But I wish to
>>>>>>>>>>>>>>>>>>>>>>>>>>> configure a
>>>>>>>>>>>>>>>>>>>>>>>>>>> listener
>>>>>>>>>>>>>>>>>>>>>>>>>>> which
>>>>>>>>>>>>>>>>>>>>>>>>>>> listens
>>>>>>>>>>>>>>>>>>>>>>>>>>> to custom TCP based protocol. As a starting
>>>>>>>>>>>>>>>>>>>>>>>>>>> point
>>>>>>>>>>>>>>>>>>>>>>>>>>> I am
>>>>>>>>>>>>>>>>>>>>>>>>>>> trying
>>>>>>>>>>>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>>>>>>>>>>>> configure a
>>>>>>>>>>>>>>>>>>>>>>>>>>> simple echo server which replies to socket
>>>>>>>>>>>>>>>>>>>>>>>>>>> connections
>>>>>>>>>>>>>>>>>>>>>>>>>>> on
>>>>>>>>>>>>>>>>>>>>>>>>>>> GlassFish
>>>>>>>>>>>>>>>>>>>>>>>>>>> v3.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Regards,
>>>>>>>>>>>>>>>>>>>>>>>>>>> Mohamed
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> Oleksiy Stashok wrote:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Mohamed,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I can't seem to find any documentation
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> for how
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> configure
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> grizlly
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> listeners and connectors on GlassFish v3.
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Currently doc team is working on that.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> So far I can find only this page
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://wiki.glassfish.java.net/Wiki.jsp?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> page=GrizzlyConfigOnePager,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> which
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> refers to a new scheme and it's not
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> complete
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> yet.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Anyone can help with this please?
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Do you have any specific item in mind you'd
>>>>>>>>>>>>>>>>>>>>>>>>>>>> like to
>>>>>>>>>>>>>>>>>>>>>>>>>>>> configure?
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Thanks.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> WBR,
>>>>>>>>>>>>>>>>>>>>>>>>>>>> Alexey.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> BR,
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Mohamed
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> View this message in context:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25750048.html
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Sent from the Grizzly - Users mailing list
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> archive
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Nabble.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> To unsubscribe, e-mail: users-
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> For additional commands, e-mail: users-
>>>>>>>>>>>>>>>>>>>>>>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>>> To unsubscribe, e-mail:
>>>>>>>>>>>>>>>>>>>>>>>>>>>> users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>>>>>>>>>>>>> For additional commands, e-mail:
>>>>>>>>>>>>>>>>>>>>>>>>>>>> users-help_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>>>> View this message in context:
>>>>>>>>>>>>>>>>>>>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25750628.html
>>>>>>>>>>>>>>>>>>>>>>>>>>> Sent from the Grizzly - Users mailing list
>>>>>>>>>>>>>>>>>>>>>>>>>>> archive
>>>>>>>>>>>>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>>>>>>>>>>>>> Nabble.com.
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>>>> To unsubscribe, e-mail: users-
>>>>>>>>>>>>>>>>>>>>>>>>>>> unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>>>>>>>>>>>> For additional commands, e-mail: users-
>>>>>>>>>>>>>>>>>>>>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>>>>> View this message in context:
>>>>>>>>>>>>>>>>>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25752899.html
>>>>>>>>>>>>>>>>>>>>>>>>> Sent from the Grizzly - Users mailing list
>>>>>>>>>>>>>>>>>>>>>>>>> archive
>>>>>>>>>>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>>>>>>>>>>> Nabble.com.
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>>> To unsubscribe, e-mail:
>>>>>>>>>>>>>>>>>>>>>>>>> users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>>>>>>>>>> For additional commands, e-mail: users-
>>>>>>>>>>>>>>>>>>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>>>> To unsubscribe, e-mail: users-
>>>>>>>>>>>>>>>>>>>>>>>> unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>>>>>>>>> For additional commands, e-mail:
>>>>>>>>>>>>>>>>>>>>>>>> users-help_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>>>> View this message in context:
>>>>>>>>>>>>>>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25765021.html
>>>>>>>>>>>>>>>>>>>>>> Sent from the Grizzly - Users mailing list
>>>>>>>>>>>>>>>>>>>>>> archive at
>>>>>>>>>>>>>>>>>>>>>> Nabble.com.
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>>> To unsubscribe, e-mail: users-
>>>>>>>>>>>>>>>>>>>>>> unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>>>>>>> For additional commands, e-mail: users-
>>>>>>>>>>>>>>>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>>> To unsubscribe, e-mail:
>>>>>>>>>>>>>>>>>>>>> users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>>>>>> For additional commands, e-mail:
>>>>>>>>>>>>>>>>>>>>> users-help_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>>>> View this message in context:
>>>>>>>>>>>>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25766557.html
>>>>>>>>>>>>>>>>>>>> Sent from the Grizzly - Users mailing list archive
>>>>>>>>>>>>>>>>>>>> at
>>>>>>>>>>>>>>>>>>>> Nabble.com.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>>> To unsubscribe, e-mail: users-
>>>>>>>>>>>>>>>>>>>> unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>>>>> For additional commands, e-mail: users-
>>>>>>>>>>>>>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>>>>>>>> To unsubscribe, e-mail:
>>>>>>>>>>>>>>>>>>> users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>>>> For additional commands, e-mail:
>>>>>>>>>>>>>>>>>>> users-help_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>>>>> View this message in context:
>>>>>>>>>>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25767056.html
>>>>>>>>>>>>>>>>>> Sent from the Grizzly - Users mailing list archive at
>>>>>>>>>>>>>>>>>> Nabble.com.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>>>>>>> To unsubscribe, e-mail: users-
>>>>>>>>>>>>>>>>>> unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>>> For additional commands, e-mail: users-
>>>>>>>>>>>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>>>>>> To unsubscribe, e-mail:
>>>>>>>>>>>>>>>>> users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>> For additional commands, e-mail:
>>>>>>>>>>>>>>>>> users-help_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> --
>>>>>>>>>>>>>>> View this message in context:
>>>>>>>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25802994.html
>>>>>>>>>>>>>>> Sent from the Grizzly - Users mailing list archive at
>>>>>>>>>>>>>>> Nabble.com.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>>>> To unsubscribe, e-mail:
>>>>>>>>>>>>>>> users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>>>> For additional commands, e-mail:
>>>>>>>>>>>>>>> users-help_at_grizzly.dev.java.net
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>>> To unsubscribe, e-mail: users-
>>>>>>>>>>>>>> unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>>> For additional commands, e-mail: users-
>>>>>>>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> --
>>>>>>>>>>>>> View this message in context:
>>>>>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p25817601.html
>>>>>>>>>>>>> Sent from the Grizzly - Users mailing list archive at
>>>>>>>>>>>>> Nabble.com.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>>> For additional commands, e-mail:
>>>>>>>>>>>>> users-help_at_grizzly.dev.java.net
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>>> For additional commands, e-mail: users-
>>>>>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> View this message in context:
>>>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p26013307.html
>>>>>>>>>>> Sent from the Grizzly - Users mailing list archive at
>>>>>>>>>>> Nabble.com.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>>> To unsubscribe, e-mail: users-
>>>>>>>>>>> unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> View this message in context:
>>>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p26034151.html
>>>>>>>>> Sent from the Grizzly - Users mailing list archive at
>>>>>>>>> Nabble.com.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>>>>> For additional commands, e-mail: users-
>>>>>>>>> help_at_grizzly.dev.java.net
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> View this message in context:
>>>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p26060328.html
>>>>>>> Sent from the Grizzly - Users mailing list archive at Nabble.com.
>>>>>>>
>>>>>>>
>>>>>>> ---------------------------------------------------------------------
>>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>>>>
>>>>>>
>>>>>>
>>>>>> ---------------------------------------------------------------------
>>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>>>
>>>>>>
>>>>>>
>>>>> http://www.nabble.com/file/p26061009/xpro.zip xpro.zip
>>>>> --
>>>>> View this message in context:
>>>>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p26061009.html
>>>>> Sent from the Grizzly - Users mailing list archive at Nabble.com.
>>>>>
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>>
>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>>>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>>>
>>>>
>>>>
>>>
>>>
>>
>> --
>> View this message in context:
>> http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p26082538.html
>> Sent from the Grizzly - Users mailing list archive at Nabble.com.
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
>> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe_at_grizzly.dev.java.net
> For additional commands, e-mail: users-help_at_grizzly.dev.java.net
>
>
>
--
View this message in context: http://www.nabble.com/Grizzly-configuration-on-Glassfish-v3-tp25750048p26111116.html
Sent from the Grizzly - Users mailing list archive at Nabble.com.