Of course it is a wrong target. package does not copy anything to your
maven local repo. The reason it was working earlier because we had
pushed the artifacts to remote repo. After the version change, we have
not pushed the artifacts yet. So, run install target and you should be fine.
Marina Vatkina wrote:
> Sahoo,
>
> I was running "clean package" inside the packager module. Is it a
> wrong target to call now? It was working before.
>
> thanks,
> -marina
>
> Sahoo wrote:
>> Marina,
>>
>> OK, I see what is going on. Upon careful reading of your first email,
>> I see that you are facing a different issue. You need to run "clean
>> install" targets as opposed to "clean package."
>>
>> Thanks,
>> Sahoo
>>
>> Marina Vatkina wrote:
>>
>>> Sahoo,
>>>
>>> I had your changes in the packager module :(.
>>>
>>> thanks,
>>> -marina
>>>
>>> Sahoo wrote:
>>>
>>>> Snjezana,
>>>>
>>>> I actually put back a fix for packager module last night (see svn
>>>> rev #23438). The same fix was required in installer and
>>>> distributions-prelude module and I see you have already done it.
>>>> Thanks for taking care of those two modules.
>>>>
>>>> Sahoo
>>>>
>>>> Snjezana Sevo-Zenzerovic wrote:
>>>>
>>>>> Marina,
>>>>>
>>>>> as the last line of Sahoo's checkin comment says, "I have not
>>>>> tried to build packager module." :-)
>>>>>
>>>>> I think there are two separate issues here: first one is that
>>>>> packager module does not build at all at this point since
>>>>> maven-glassfish-extension is not defined as extension in packager,
>>>>> distributions-prelude and installer modules. Second issue is that
>>>>> because of that build failure, updated packager zip file artifacts
>>>>> do not get published into maven repository and that's direct cause
>>>>> of your problem.
>>>>>
>>>>> I'll try to update affected POMs as soon as possible and make
>>>>> packager and other failing modules buildable...
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Snjezana
>>>>>
>>>>> Marina Vatkina wrote:
>>>>>
>>>>>> Hi Sahoo,
>>>>>>
>>>>>> While I can successfully build v3_prelude_release following your
>>>>>> instructions, building inside v3_prelude_release/packager - 'mvn
>>>>>> -D<...> clean package' fails with the message below.
>>>>>>
>>>>>> thanks,
>>>>>> -marina
>>>>>>
>>>>>> [INFO]
>>>>>> ------------------------------------------------------------------------
>>>>>>
>>>>>> [ERROR] BUILD ERROR
>>>>>> [INFO]
>>>>>> ------------------------------------------------------------------------
>>>>>>
>>>>>> [INFO] Failed to resolve artifact.
>>>>>>
>>>>>> Missing:
>>>>>> ----------
>>>>>> 1) org.glassfish.packager:felix:zip:3.0-Prelude-SNAPSHOT
>>>>>>
>>>>>> Try downloading the file manually from the project website.
>>>>>>
>>>>>> Then, install it using the command:
>>>>>> mvn install:install-file -DgroupId=org.glassfish.packager
>>>>>> -DartifactId=felix \
>>>>>> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip -Dfile=/path/to/file
>>>>>> Alternatively, if you host your own repository you can deploy the
>>>>>> file there: mvn deploy:deploy-file
>>>>>> -DgroupId=org.glassfish.packager -DartifactId=felix \
>>>>>> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip
>>>>>> -Dfile=/path/to/file \
>>>>>> -Durl=[url] -DrepositoryId=[id]
>>>>>>
>>>>>> Path to dependency:
>>>>>> 1)
>>>>>> org.glassfish.packager:glassfish-api:distribution-base-zip:3.0-Prelude-SNAPSHOT
>>>>>>
>>>>>> 2) org.glassfish.packager:felix:zip:3.0-Prelude-SNAPSHOT
>>>>>>
>>>>>> 2) org.glassfish.packager:glassfish-hk2:zip:3.0-Prelude-SNAPSHOT
>>>>>>
>>>>>> Try downloading the file manually from the project website.
>>>>>>
>>>>>> Then, install it using the command:
>>>>>> mvn install:install-file -DgroupId=org.glassfish.packager
>>>>>> -DartifactId=glassfish-hk2 \
>>>>>> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip -Dfile=/path/to/file
>>>>>> Alternatively, if you host your own repository you can deploy the
>>>>>> file there: mvn deploy:deploy-file
>>>>>> -DgroupId=org.glassfish.packager -DartifactId=glassfish-hk2 \
>>>>>> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip
>>>>>> -Dfile=/path/to/file \
>>>>>> -Durl=[url] -DrepositoryId=[id]
>>>>>>
>>>>>> Path to dependency:
>>>>>> 1)
>>>>>> org.glassfish.packager:glassfish-api:distribution-base-zip:3.0-Prelude-SNAPSHOT
>>>>>>
>>>>>> 2) org.glassfish.packager:glassfish-hk2:zip:3.0-Prelude-SNAPSHOT
>>>>>>
>>>>>> 3) org.glassfish.packager:glassfish-grizzly:zip:3.0-Prelude-SNAPSHOT
>>>>>>
>>>>>> Try downloading the file manually from the project website.
>>>>>>
>>>>>> Then, install it using the command:
>>>>>> mvn install:install-file -DgroupId=org.glassfish.packager
>>>>>> -DartifactId=glassfish-grizzly \
>>>>>> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip -Dfile=/path/to/file
>>>>>> Alternatively, if you host your own repository you can deploy the
>>>>>> file there: mvn deploy:deploy-file
>>>>>> -DgroupId=org.glassfish.packager -DartifactId=glassfish-grizzly \
>>>>>> -Dversion=3.0-Prelude-SNAPSHOT -Dpackaging=zip
>>>>>> -Dfile=/path/to/file \
>>>>>> -Durl=[url] -DrepositoryId=[id]
>>>>>>
>>>>>> Path to dependency:
>>>>>> 1)
>>>>>> org.glassfish.packager:glassfish-api:distribution-base-zip:3.0-Prelude-SNAPSHOT
>>>>>>
>>>>>> 2) org.glassfish.packager:glassfish-grizzly:zip:3.0-Prelude-SNAPSHOT
>>>>>>
>>>>>> ----------
>>>>>> 3 required artifacts are missing.
>>>>>>
>>>>>> for artifact:
>>>>>> org.glassfish.packager:glassfish-api:distribution-base-zip:3.0-Prelude-SNAPSHOT
>>>>>>
>>>>>>
>>>>>> from the specified remote repositories:
>>>>>> central (http://repo1.maven.org/maven2),
>>>>>> maven2.java.net (http://download.java.net/maven/2),
>>>>>> repo1.maven.org (http://repo1.maven.org/maven2),
>>>>>> java-dev-repository
>>>>>> (https://maven-repository.dev.java.net/nonav/repository),
>>>>>> glassfish-repository (http://download.java.net/maven/glassfish),
>>>>>> java.net (http://download.java.net/maven/1),
>>>>>> maven2.java.net-backup
>>>>>> (https://maven2-repository.dev.java.net/nonav/repository),
>>>>>> glassfish-repository-wsinterop (http://maven.dyndns.org/glassfish/)
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Sahoo wrote:
>>>>>>
>>>>>>> After my recent check in [1], when you update your workspace and
>>>>>>> do a build, you are likely to see maven complaining about
>>>>>>> missing artifact called
>>>>>>> /org.glassfish.build:maven-glassfish-extension:jar:3.0-Prelude-SNAPSHOT./
>>>>>>> To avoid this, run the following command:
>>>>>>> 'mvn -Prelease-phase1 install' in your workspace.
>>>>>>>
>>>>>>> More about the problem and solution:
>>>>>>> The reason for this error is obvious: build depends on an
>>>>>>> artifact which is not available in remote repo. But, you may
>>>>>>> have noticed that v3 build itself produces that artifact (see
>>>>>>> build/maven-glassfish-extension/pom.xml). Why then maven
>>>>>>> complains instead of building the artifact locally and using the
>>>>>>> same like every other build dependency? Even though that
>>>>>>> artifact is produced by v3 build, maven can't get there as it is
>>>>>>> a build extension that maven needs to resolve at a very early
>>>>>>> stage of release. So, we have introduced a separate profile
>>>>>>> called /release-phase1/ which only builds this artifact. To
>>>>>>> invoke maven in this profile, pass -Prelease-phase1 in command
>>>>>>> line.
>>>>>>>
>>>>>>> We are asking RE to publish 3.0-Prelude-SNAPSHOT artifacts to
>>>>>>> remote repo so that everyone does not run into this problem.
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Sahoo
>>>>>>>
>>>>>>> [1]
>>>>>>> http://fisheye4.atlassian.com/changelog/glassfish-svn/branches?cs=23437
>>>>>>>
>>>>>>>
>>>>>>> ------------------------------------------------------------------------
>>>>>>>
>>>>>>>
>>>>>>> Subject:
>>>>>>> [GFv3] HEADS UP: version to be updated to 3.0-Prelude and 3.0 in
>>>>>>> branch and trunk resp.
>>>>>>> From:
>>>>>>> Sahoo <sahoo_at_Sun.COM>
>>>>>>> Date:
>>>>>>> Wed, 15 Oct 2008 20:10:32 +0530
>>>>>>> To:
>>>>>>> dev_at_glassfish.dev.java.net
>>>>>>>
>>>>>>> To:
>>>>>>> dev_at_glassfish.dev.java.net
>>>>>>>
>>>>>>>
>>>>>>> To avoid confusion, we have decided to use version numbers in
>>>>>>> pom.xmls same as what release we are preparing. So, we will set
>>>>>>> the version as 3.0-Prelude-SNAPSHOT in prelude branch and
>>>>>>> 3.0-SNAPSHOT in trunk. When the final release is performed,
>>>>>>> SNAPSHOT will be dropped. I am in the process of making the
>>>>>>> change, so I request you not to make major changes to pom.xmls
>>>>>>> at this point of time.
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Sahoo
>>>>>>>
>>>>>>> ---------------------------------------------------------------------
>>>>>>>
>>>>>>> To unsubscribe, e-mail: dev-unsubscribe_at_glassfish.dev.java.net
>>>>>>> For additional commands, e-mail: dev-help_at_glassfish.dev.java.net
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> ------------------------------------------------------------------------
>>>>>>>
>>>>>>>
>>>>>>> ---------------------------------------------------------------------
>>>>>>>
>>>>>>> To unsubscribe, e-mail: dev-unsubscribe_at_glassfish.dev.java.net
>>>>>>> For additional commands, e-mail: dev-help_at_glassfish.dev.java.net
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> ---------------------------------------------------------------------
>>>>>>
>>>>>> To unsubscribe, e-mail: dev-unsubscribe_at_glassfish.dev.java.net
>>>>>> For additional commands, e-mail: dev-help_at_glassfish.dev.java.net
>>>>>>
>>>>>
>>>>>
>>>>> ---------------------------------------------------------------------
>>>>> To unsubscribe, e-mail: dev-unsubscribe_at_glassfish.dev.java.net
>>>>> For additional commands, e-mail: dev-help_at_glassfish.dev.java.net
>>>>>
>>>>
>>>> ---------------------------------------------------------------------
>>>> To unsubscribe, e-mail: dev-unsubscribe_at_glassfish.dev.java.net
>>>> For additional commands, e-mail: dev-help_at_glassfish.dev.java.net
>>>>
>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: dev-unsubscribe_at_glassfish.dev.java.net
>>> For additional commands, e-mail: dev-help_at_glassfish.dev.java.net
>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: dev-unsubscribe_at_glassfish.dev.java.net
>> For additional commands, e-mail: dev-help_at_glassfish.dev.java.net
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: dev-unsubscribe_at_glassfish.dev.java.net
> For additional commands, e-mail: dev-help_at_glassfish.dev.java.net
>