Kedar Mhaswade wrote:
> That's because master password was NEVER enforced for v3. I
> implemented it
> for the first time for v3. If you ran the commands like you did for V2,
> this would always work. Remember, for V2, a domain startup would always
> require to open the stores otherwise the server startup fails.
Yes but in V2 when the masterpassword is not provided for the
create-domain command the password is assumed to be "changeit".
The start-domain command never prompted for masterpassword in this
default case.
>
> Since the master password was enforced only since b55, the start-domain
> needs this to be provided while doing the startup.
>
> Now, in most cases, this is not a problem. In the "default" case, i.e.
> when the domain is *created* with default master password, startup would
> have it.
Does this mean the masterpassword has to be explicitly provided as
"changeit" ?.
When the masterpassword is not provided the create-domain command still
goes ahead and creates a domain. What is the masterpassword used in this
case ?.
If it is "changeit" why does the start-domain command still prompts for
masterpassword ?.
> In another case, where you choose the do --savemasterpassword during
> create-domain, start-domain would have that password read
> automatically for
> you, so that you don't have to provide it during startup.
>
> -Kedar
>
>
> Sankar Neelakandan wrote:
>> Kedar,
>> The exact problem is,
>> In B55 when the domain is created without MASTERPASSWORD in
>> passwordfile the start-domain works without prompting for
>> masterpassword.
>> But in B56 when the domain is created without MASTERPASSWORD in
>> passwordfile the start-domain doesn't work without providing the
>> master password. (If the domain is started without a console there is
>> no prompting for masterpassword and fails with the noconsole message)
>>
>> Please see the following logs.
>>
>>
>> bash-3.00# cat /password.txt
>> AS_ADMIN_PASSWORD=adminadmin
>>
>>
>> bash-3.00# glassfishv3/glassfish/bin/asadmin create-domain
>> --adminport 4848 --user admin --passwordfile /password.txt domain1
>> Deprecated syntax: create-domain, Options: [passwordfile, user]
>> Using port 4848 for Admin.
>> Using default port 8080 for HTTP Instance.
>> Using default port 7676 for JMS.
>> Using default port 3700 for IIOP.
>> Using default port 8181 for HTTP_SSL.
>> Using default port 3820 for IIOP_SSL.
>> Using default port 3920 for IIOP_MUTUALAUTH.
>> Using default port 8686 for JMX_ADMIN.
>> Distinguished Name of the self-signed X.509 Server Certificate is:
>> [CN=easqesf4,OU=GlassFish,O=Sun Microsystems,L=Santa
>> Clara,ST=California,C=US]
>> Domain domain2 created.
>> Command create-domain executed successfully.
>>
>> bash-3.00# glassfishv3/glassfish/bin/asadmin start-domain domain2
>> No valid master password found
>> Enter master password (3 attempt(s) remain)> Sorry, incorrect master
>> password, retry
>> Enter master password (2 attempt(s) remain)> Sorry, incorrect master
>> password, retry
>> Enter master password (1 attempt(s) remain)> Sorry, incorrect master
>> password, retry
>> Number of attempts (3) exhausted, giving up
>> Command start-domain failed.
>>
>> When started without console it fails with the following error message
>>
>>
>> bash-3.00# glassfishv3/glassfish/bin/asadmin start-domain domain1
>> Deprecated syntax: start-domain, Options: [passwordfile, user]
>> No valid master password found
>> Command start-domain failed.
>> No console, no prompting possible
>>
>>
>>
>> Kedar Mhaswade wrote:
>>> Dave,
>>>
>>> It should be AS_ADMIN_MASTERPASSWORD. AS_ADMIN_USERPASSWORD is
>>> for (an entirely) different purpose.
>>>
>>> If you don't really care about master password (:-0) you can just
>>> have AS_ADMIN_MASTERPASSWORD=changeit added to this password.txt
>>> file and I am pretty sure this will be fixed.
>>>
>>> But I think we need to address this use case. My understanding was
>>> that in this case, (i.e. the way your password.txt seems) we should
>>> have defaulted the master password to "changeit". I am not sure if
>>> this is due to recent changes to create-domain command as well. We'll
>>> investigate.
>>>
>>> For now, just add this one more line to password.txt to get unblocked.
>>>
>>> -Kedar
>>>
>>> David Ronge wrote:
>>>> Hi Kedar,
>>>>
>>>> yes, we delete domain1 first to be sure the eventual setup change
>>>> of default domain won't give us some obscure diffs and to keep
>>>> setup stable.
>>>>
>>>> (delete-domain.1:
>>>> [exec] Domain domain1 deleted.
>>>> [exec] Command delete-domain executed successfully.
>>>> No passwd used.)
>>>> content of the password.txt is here:
>>>> AS_ADMIN_PASSWORD=adminadmin
>>>> AS_ADMIN_USERPASSWORD=changeit
>>>>
>>>> create-by-admin-command:
>>>> [echo] exec: create-domain --user admin --passwordfile
>>>> /space/test4u/cvswork/sunsw/tango/qe-tests/gf-setup/password.txt
>>>> domain1
>>>> [echo] With properties:
>>>> [echo] http.ssl.port=8181:orb.listener.port=3007:imq.port=7676
>>>> [exec] Deprecated syntax: create-domain, Options:
>>>> [passwordfile, user]
>>>> [exec] Using port 4848 for Admin.
>>>> [exec] Using port 8080 for HTTP Instance.
>>>> [exec] Using default port 7676 for JMS.
>>>> [exec] Using port 3007 for IIOP.
>>>> [exec] Using port 8181 for HTTP_SSL.
>>>> [exec] Using default port 3820 for IIOP_SSL.
>>>> [exec] Using default port 3920 for IIOP_MUTUALAUTH.
>>>> [exec] Using default port 8686 for JMX_ADMIN.
>>>> [exec] Distinguished Name of the self-signed X.509 Server
>>>> Certificate is:
>>>> [exec] [CN=eas-x2100-1.India.Sun.COM,OU=GlassFish,O=Sun
>>>> Microsystems,L=Santa Clara,ST=California,C=US]
>>>> [exec] Domain domain1 created.
>>>> [exec] Command create-domain executed successfully.
>>>>
>>>> is the target used, more precisely, target corresponding to the
>>>> above log is here:
>>>> <target name="create-by-admin-command" depends="get-asadmin"
>>>> if="create.by.admin.command">
>>>> <!-- propertyset refid="full.domain.propertyset"/ -->
>>>> <echo message="exec: create-domain --user admin --passwordfile
>>>> ${basedir}/password.txt ${domain.name}"/>
>>>> <property name="dmn.specif.1"
>>>> value="http.ssl.port=${https.port}" />
>>>> <property name="dmn.specif.2"
>>>> value="${dmn.specif.1}:orb.listener.port=${orb.port}" />
>>>> <property name="dmn.specif.0"
>>>> value="${dmn.specif.2}:imq.port=${imq.port}" />
>>>> <echo message="With properties:"/>
>>>> <echo message="${dmn.specif.0}"/>
>>>>
>>>> <exec executable="${asadmin.executable}" dir="${basedir}"
>>>> resultproperty="asadmin.result">
>>>> <!-- in ${gf.install.home} or ${basedir} ? -->
>>>> <arg value="create-domain"/>
>>>> <arg value="--user"/>
>>>> <arg value="admin"/>
>>>> <arg value="--passwordfile"/>
>>>> <arg value="password.txt"/><!-- ${basedir}/... -->
>>>> <arg value="--instanceport"/>
>>>> <arg value="${instance.port}"/>
>>>> <arg value="--adminport"/>
>>>> <arg value="${admin.port}"/>
>>>> <arg value="--domaindir"/>
>>>> <arg value="${gf.install.home}/domains"/>
>>>> <arg value="--domainproperties"/>
>>>> <arg value="${dmn.specif.0}"/>
>>>> <!-- leave as last item value - (first that is not an
>>>> option) -->
>>>> <arg value="${domain.name}"/>
>>>> </exec>
>>>> </target>
>>>>
>>>> with --domainproperties echoed as visible.
>>>> There's alternative setup target using setup.xml but that is used
>>>> with V2 only for continuity.
>>>> (The property set contains the original default ports mainly - i
>>>> think these are exclusively defaults - you can see better.)
>>>>
>>>> The master password claimed is AS_ADMIN_PASSWORD - according to the
>>>> password.txt? Or the other entry?
>>>>
>>>> ~dave
>>>>
>>>> Kedar Mhaswade wrote:
>>>>> Hi David,
>>>>>
>>>>> VB Kumar told me that you guys were seeing some issues here.
>>>>>
>>>>> Yes, I made some changes to the master password handling in b55.
>>>>> It was
>>>>> not a big deal as far as users are concerned. I am sorry that it
>>>>> seems to
>>>>> affect you. But I do think that you guys are creating domain
>>>>> differently.
>>>>> As you can see the console output of start-domain, it contains:
>>>>>
>>>>> >>> [exec] No valid master password found
>>>>> >>> [exec] No console, no prompting possible
>>>>> >>> [exec] Command start-domain failed.
>>>>> >>> [exec] Result: 1
>>>>>
>>>>> So, it's not failing for deprecated syntax, but for something else.
>>>>> Can I get the entire sequence of commands you run? For example, is
>>>>> the
>>>>> same password.txt provided to both create-domain and start-domain
>>>>> commands?
>>>>> I somehow think that the master password for this domain is not
>>>>> the default
>>>>> ("changeit") or there is a bug in what I recently did ...
>>>>>
>>>>> Let me know either way. My commit log is here:
>>>>> http://fisheye4.atlassian.com/changelog/glassfish-svn/trunk/v3/admin/cli/src/main/java/com/sun/enterprise/admin/cli/commands?cs=29406
>>>>>
>>>>>
>>>>> -Kedar
>>>>>
>>>>>
>>>>> David Ronge wrote:
>>>>>> This way:
>>>>>>
>>>>>> <target name="start-a-domain" if="a.domain.exists"
>>>>>> unless="skip.domain" depends="check.domain.exists">
>>>>>> <property name="a.domain.name"
>>>>>> value="${default.domain}"/><!-- convenience default -->
>>>>>> <echo message="STARTING domain ${a.domain.name}..." />
>>>>>> <echo message="stuff.dir ${stuff.dir}..." />
>>>>>> <exec executable="${gf.install.home}/bin/asadmin.bat"
>>>>>> os="Windows XP,Windows 2000,Windows 2003"
>>>>>> dir="${stuff.dir}" spawn="true" failonerror="false">
>>>>>> <arg value="start-domain"/>
>>>>>> <arg value="--user"/>
>>>>>> <arg value="admin"/>
>>>>>> <arg value="--passwordfile"/>
>>>>>> <arg value="password.txt"/>
>>>>>> <arg value="${a.domain.name}"/>
>>>>>> </exec>
>>>>>> <exec executable="${gf.install.home}/bin/asadmin"
>>>>>> dir="${stuff.dir}" os="SunOS,Linux,AIX,Mac OS X">
>>>>>> <arg line="start-domain --user admin --passwordfile
>>>>>> password.txt ${a.domain.name}"/>
>>>>>> </exec>
>>>>>> <echo message="STARTED domain ${a.domain.name}..." />
>>>>>> </target>
>>>>>>
>>>>>> (start-domain command seemed not to be obligatory with user and
>>>>>> passwd data but stop-domain did when file-user was added etc.
>>>>>> So we include it for start too.)
>>>>>> This worked reliably unless some integration fault prevented
>>>>>> proper start due to bundling error or start failure of some
>>>>>> essential service.
>>>>>>
>>>>>> ~dave
>>>>>>
>>>>>> Jane Young wrote:
>>>>>>> Can you provide the syntax used to start the domain?
>>>>>>>
>>>>>>> Thanks,
>>>>>>> Jane
>>>>>>>
>>>>>>>
>>>>>>> David Ronge wrote:
>>>>>>>> Hi, is there any instruction to handle starting/stopping domain
>>>>>>>> differently now?
>>>>>>>> The behavior has changed ~ with build b55 as now i can see >
>>>>>>>>
>>>>>>>> start-a-domain:
>>>>>>>> [echo] STARTING domain domain1...
>>>>>>>> [echo] stuff.dir
>>>>>>>> /space/test4u/cvswork/sunsw/tango/qe-tests/gf-setup...
>>>>>>>> [exec] Deprecated syntax: start-domain, Options:
>>>>>>>> [passwordfile, user]
>>>>>>>> [exec] No valid master password found
>>>>>>>> [exec] No console, no prompting possible
>>>>>>>> [exec] Command start-domain failed.
>>>>>>>> [exec] Result: 1
>>>>>>>> [echo] STARTED domain domain1...
>>>>>>>>
>>>>>>>> it says "deprecated" but the coming syntax simply doesn't work
>>>>>>>> without change.
>>>>>>>> Can someone please give me a clue?
>>>>>>>> Our team tests Metro/jaxws webservices on V2/V3/Tomcat... so
>>>>>>>> managing GF administration is sort of routine for us.
>>>>>>>> (Still, if there's page to look at when something stops working
>>>>>>>> the old way it would be nice.)
>>>>>>>>
>>>>>>>> Thank you much in advance.
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>> David
>>>>>>>>
>>>>>>>>
>>>>>>>> ---------------------------------------------------------------------
>>>>>>>>
>>>>>>>> To unsubscribe, e-mail: admin-unsubscribe_at_glassfish.dev.java.net
>>>>>>>> For additional commands, e-mail: admin-help_at_glassfish.dev.java.net
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>> ---------------------------------------------------------------------
>>>>>>
>>>>>> To unsubscribe, e-mail: admin-unsubscribe_at_glassfish.dev.java.net
>>>>>> For additional commands, e-mail: admin-help_at_glassfish.dev.java.net
>>>>>>
>>>
>>> ---------------------------------------------------------------------
>>> To unsubscribe, e-mail: admin-unsubscribe_at_glassfish.dev.java.net
>>> For additional commands, e-mail: admin-help_at_glassfish.dev.java.net
>>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: admin-unsubscribe_at_glassfish.dev.java.net
>> For additional commands, e-mail: admin-help_at_glassfish.dev.java.net
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: admin-unsubscribe_at_glassfish.dev.java.net
> For additional commands, e-mail: admin-help_at_glassfish.dev.java.net
>