I have set the class path suffix.
PFA the updated domain.xml
Thanks and Regards
Deepu Janardhananachary
-----Original Message-----
From: Deepu Syamaladevi Janardhananachary
Sent: Tuesday, November 10, 2009 9:49 PM
To: 'Ramesh.Parthasarathy_at_Sun.COM'; users_at_genericjmsra.dev.java.net
Cc: Seema Richard
Subject: RE: Issue in glassfish configuration with Tibco EMS and MDB
>> 1. I dont see the ra config in the domain.xml, have u created it as per
"Configuring the Resource Adapter"
Yes, I have done it.
In the command prompt it showed executed successfully.
2. I do not see the Tibco classes in the classpath prefix of server,
without which your integration is not going to work
has to be done as per 3rd bullet in "Initial Setup"
Sorry , I missed it. I will try it and let you know.
Thanks and Regards
Deepu Janardhananachary
-----Original Message-----
From: Ramesh.Parthasarathy_at_Sun.COM [mailto:Ramesh.Parthasarathy_at_Sun.COM]
Sent: Tuesday, November 10, 2009 9:29 PM
To: users_at_genericjmsra.dev.java.net
Cc: Seema Richard; Deepu Syamaladevi Janardhananachary
Subject: Re: Issue in glassfish configuration with Tibco EMS and MDB
1. I dont see the ra config in the domain.xml, have u created it as per
"Configuring the Resource Adapter"
2. I do not see the Tibco classes in the classpath prefix of server,
without which your integration is not going to work
has to be done as per 3rd bullet in "Initial Setup"
Thanks
-Ramesh
Deepu Syamaladevi Janardhananachary wrote:
> PFA
>
>
> Thanks and Regards
> Deepu Janardhananachary
>
>
>
> -----Original Message-----
> From: Ramesh.Parthasarathy_at_Sun.COM [mailto:Ramesh.Parthasarathy_at_Sun.COM]
> Sent: Tuesday, November 10, 2009 8:37 PM
> To: users_at_genericjmsra.dev.java.net
> Cc: Seema Richard
> Subject: Re: Issue in glassfish configuration with Tibco EMS and MDB
>
>
>> Do I need to give my queue name in the place of Queue?
>>
> Yes,
>
> and I need to see your deployment descriptor and domain.xml to comment
> on the exception
>
> -Ramesh
> Deepu Syamaladevi Janardhananachary wrote:
>
>> Hi Ramesh,
>>
>>
>>
>> I have done as in the document
>>
>>
>>
>>
>>
>> I am using EJB3.
>>
>> I have done exactly like in the document.
>>
>> https://genericjmsra.dev.java.net/docs/tibco-genericjmsra-integration-sample-doc/Integrating_Sun_Java_System_Application_Server_with_Tibco_JMS_using_the_Generic_Resource_Adapter_for_JMS.html
>>
>>
>>
>> In the document in the sun-ejb-jar entry it is mentioned as
>> imqDestinationName=Queue
>>
>> Do I need to give my queue name in the place of Queue?
>>
>>
>>
>>
>>
>> When I tried to deploy the ear file I got the error like the following
>>
>> Could you please tell me where is the mapping miss match happened?
>>
>>
>>
>>
>>
>> [#|2009-11-10T20:13:30.151+0530|WARNING|sun-appserver9.1|javax.enterprise.system.tools.deployment|_ThreadID=60;_ThreadName=Thread-5373;_RequestID=7d1bb0da-cfcf-4365-ad8d-35d0f43e627f;|This
>> bean [MDBTest1] has no resource reference by the name of
>> [jms/QCFactory]|#]
>>
>>
>>
>> [#|2009-11-10T20:13:30.151+0530|SEVERE|sun-appserver9.1|javax.enterprise.system.tools.deployment|_ThreadID=60;_ThreadName=Thread-5373;jndi-name;jms/QCFactory;_RequestID=7d1bb0da-cfcf-4365-ad8d-35d0f43e627f;|"DPL8007:
>> Invalid Deployment Descriptors element jndi-name value jms/QCFactory"|#]
>>
>>
>>
>> [#|2009-11-10T20:13:30.666+0530|SEVERE|sun-appserver9.1|javax.enterprise.system.tools.deployment|_ThreadID=60;_ThreadName=Thread-5373;_RequestID=7d1bb0da-cfcf-4365-ad8d-35d0f43e627f;|Exception
>> occured in J2EEC Phasejava.lang.NullPointerException
>>
>> com.sun.enterprise.deployment.backend.IASDeploymentException: Error
>> loading deployment descriptors for module [WUMT] -- null
>>
>> at
>> com.sun.enterprise.deployment.backend.Deployer.loadDescriptors(Deployer.java:390)
>>
>> at
>> com.sun.enterprise.deployment.backend.AppDeployerBase.loadDescriptors(AppDeployerBase.java:358)
>>
>>
>>
>>
>>
>> Thanks and Regards
>>
>> Deepu Janardhananachary
>>
>>
>>
>>
>>
>> -----Original Message-----
>> From: Ramesh.Parthasarathy_at_Sun.COM [mailto:Ramesh.Parthasarathy_at_Sun.COM]
>> Sent: Tuesday, November 10, 2009 9:34 AM
>> To: Seema Richard
>> Cc: users_at_genericjmsra.dev.java.net; Deepu Syamaladevi Janardhananachary
>> Subject: Re: Issue in glassfish configuration with Tibco EMS and MDB
>>
>>
>>
>> Hi Seema,
>>
>> The ra.xml cannot be edited through admin GUI, and it is not
>>
>> supposed to be. The ra.xml is a bundled configuration of the resource
>>
>> adapter. The values configured through ra-config (that is persisted in
>>
>> domain.xml and *not* ra.xml) will override the the ra.xml values. And
>>
>> finally an MCF configuration (or activation spec) will override what is
>>
>> configured in the ra-config.
>>
>>
>>> 1. The ra.xml file in the deployed file didn't have the values that
>>>
>> were entered.
>>
>> What is the requirement for this ? If you are expecting the
>>
>> configuration in ra-config to be persisted in ra.xml, then the
>>
>> understanding is not correct.
>>
>>
>>
>>
>>> 2. The error message in the logs were " Caused by:
>>>
>> java.lang.Exception: ResourceAdapterConfig already exists: cannot add
>> duplicate"
>>
>> There is already an ra-config with the same name, and that is why you
>>
>> get this error.
>>
>>
>>
>> If there is any step in the integration guide that requires
>>
>> clarification, please point out.
>>
>>
>>
>> Thanks
>>
>> -Ramesh
>>
>>
>>
>> Seema Richard wrote:
>>
>>
>>> Ramesh,
>>>
>>> The following steps were performed according to the tutorial link
>>>
>> that you sent.
>>
>>
>>> - The asadmin create-resource-adapter-config command displayed a
>>>
>> success message after execution.
>>
>>
>>> - The genericra.rar available in
>>>
>> glassfish-v2ur2\lib\addons\resourceadapters\genericjmsra was deployed
>>
>>
>>> Results were as follows.
>>>
>>> 1. The ra.xml file in the deployed file didn't have the values that
>>>
>> were entered.
>>
>>
>>> 2. The error message in the logs were " Caused by:
>>>
>> java.lang.Exception: ResourceAdapterConfig already exists: cannot add
>> duplicate"
>>
>>
>>> Please advise if we are missing something.
>>>
>>> Thanks,
>>>
>>> Seema
>>>
>>> -----Original Message-----
>>>
>>> From: Ramesh.Parthasarathy_at_Sun.COM
>>>
>> [mailto:Ramesh.Parthasarathy_at_Sun.COM]
>>
>>
>>> Sent: Monday, November 09, 2009 9:50 PM
>>>
>>> To: users_at_genericjmsra.dev.java.net
>>>
>>> Cc: Seema Richard
>>>
>>> Subject: Re: Issue in glassfish configuration with Tibco EMS and MDB
>>>
>>> Hi
>>>
>>> Its not clear as to what you are trying to do
>>>
>>> If you are looking for integration steps, please follow this
>>>
>> https://genericjmsra.dev.java.net/docs/tibco-genericjmsra-integration-sample-doc/Integrating_Sun_Java_System_Application_Server_with_Tibco_JMS_using_the_Generic_Resource_Adapter_for_JMS.html
>>
>>
>>> If you have an error , the server.log file would provide more
>>>
>> information.
>>
>>
>>> Thanks
>>>
>>> Ramesh
>>>
>>> Deepu Syamaladevi Janardhananachary wrote:
>>>
>>>
>>>
>>>> Hi,
>>>>
>>>> I would like to know how to get messages from a Tibco Queue to an MDB
>>>>
>>>> deployed in glassfish.
>>>>
>>>> I am using glassfish server(Sun Java System Application Server 9.1_02
>>>>
>>>> (build b04-fcs)), EJB 3 and Tibco EMS version 5.0.0
>>>>
>>>> I created the resource adapter genericra using the command prompt
>>>>
>>>> C:\Program Files\glassfish-v2ur2\bin>asadmin
>>>>
>>>> create-resource-adapter-config --user admin --property
>>>>
>> SupportsXA=false:ProviderIntegrationMode=jndi:UserName=xxx:Password=xxx:JndiProperties=java.naming.factory.url.pkgs\\=com.tibco.tibjms
>>
>>
>> .naming,java.naming.factory.initial\\=com.tibco.tibjms.naming.TibjmsInitialContextFactory,java.naming.provider.url\\=xxx\://xxx.xxx.com\\:1234:LogLevel=
>>
>>
>>>> finest genericra
>>>>
>>>> After this though it is showing executed successfully, I couldn't find
>>>>
>>>> the location of created file.
>>>>
>>>> From the admin console ApplicationsąConnector Modules, I deployed the
>>>>
>>>> genericra.rar available in
>>>>
>>>> glassfish-v2ur2\lib\addons\resourceadapters\genericjmsra.
>>>>
>>>> Then two columns of Name and Value came. The ra.xml in the deployed
>>>>
>>>> file didn't have any of the value that I entered. Its version is 1.7
>>>>
>>>> What do I need to do to change the values in resource adapter?
>>>>
>>>> So I changed my approach
>>>>
>>>> I created a connector project in eclipse(Ganymede) and entered the
>>>>
>>>> values in the ra.xml within the tag resourceadapter. But when I deploy
>>>>
>>>> it in the connector Modules, it is saying as error resource adapter.
>>>>
>>>> Regards,
>>>>
>>>> Deepu Janardhananachary
>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe_at_genericjmsra.dev.java.net
> For additional commands, e-mail: users-help_at_genericjmsra.dev.java.net
>
>
> ------------------------------------------------------------------------
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: users-unsubscribe_at_genericjmsra.dev.java.net
> For additional commands, e-mail: users-help_at_genericjmsra.dev.java.net
>
- application/x-zip-compressed attachment: domain.zip