Oracle® Database Companion CD Quick Installation Guide
10g Release 1 (10.1) for hp HP-UX Itanium Part No. B13765-01 |
|
Copyright © 1996, 2004, Oracle. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.
Companion CD Quick Installation Guide
10g Release 1 (10.1) for hp HP-UX Itanium
March 2004
Part No. B13765-01
This guide describes how to quickly install Oracle Database 10g Companion Products (Oracle HTTP Server and Oracle HTML DB) on HP-UX systems. It includes information about the following:
Note: This guide describes how to install Oracle Database 10g Companion Products on a system that does not have any Oracle software installed on it. If there is an existing Oracle software installation on this system, see the Oracle Database Companion CD Installation Guide for UNIX Systems for more detailed installation instructions. |
This guide describes how to complete a default installation of Oracle Database 10g Companion Products in a new Oracle home directory. Oracle Database 10g Companion Products include:
Oracle HTTP Server: A Web server that is based on Apache HTTP Server.
Oracle HTML DB: A hosted development environment that enables non-programmers to create database-centric Web applications. It provides developers with the productivity of a desktop database, but with the security, reliability, and performance of the Oracle database. Any IT organization can host Oracle HTML DB environments for departments in the company that do not have Oracle development skills available.
This guide does not describe how to complete the following tasks:
Installing the Oracle Database 10g Products in an existing Oracle home that contains Oracle Database 10g
Installing Oracle HTML DB in an existing Oracle home that contains Oracle HTTP Server
For more detailed information about installing Oracle Database 10g Companion CD products, including information about the tasks not described in this guide, see the Oracle Database Companion CD Installation Guide for UNIX Systems.
This guide is available on the product disc. To access it, use a Web browser to open the welcome.htm
file, either in the top-level directory of the CD-ROM or in the companion
directory on the DVD-ROM, then select the Documentation tab.
Complete the following tasks before installing Oracle HTML DB.
Before installing Oracle HTML DB, identify the Oracle database that you want to use with Oracle HTML DB. The database must be Oracle9i release 9.2.0.3 or higher. The database can be on a different system from the system where you are installing Oracle HTML DB.
Oracle XML DB must be installed in the database that you want to use.
If you are using a preconfigured database created either during an installation or by the Database Configuration Assistant (DBCA), Oracle XML DB is already installed and configured. For information about manually adding Oracle XML DB to an existing database, see the Oracle XML DB Developer’s Guide.
During the installation, you must specify the following information about the database:
The host name of the database system
The port number of the Oracle Net listener
The service name of the database
The password of the SYS user
Make sure that you have this information before starting the installation.
Before you install the Oracle software, you must complete several tasks as the root
user. To log in as the root
user, complete one of the following procedures:
Note: You must install the software from an X window workstation, an X terminal, or a PC or other system with X server software installed. |
If you are installing the software from an X Window System workstation or X terminal:
Start a local terminal session, for example, an X terminal (xterm
).
If you are not installing the software on the local system, enter the following command to enable remote hosts to display X applications on the local X server:
$ xhost +
If you want to install the software on a remote system, enter a command similar to the following to connect to that system:
$ telnet remote_host
If you are not logged in as the root
user, enter the following command to switch user to root
:
$ su - root password: #
If you are installing the software from a PC or other system with X server software installed:
Note: If necessary, see your X server documentation for more information about completing this procedure. Depending on the X server software that you are using, you may need to complete the tasks in a different order. |
Start the X server software.
Configure the security settings of the X server software to permit remote hosts to display X applications on the local system.
Connect to the remote system where you want to install the software and start a terminal session on that system, for example, an X terminal (xterm
).
If you are not logged in as the root
user on the remote system, enter the following command to switch user to root
:
$ su - root password: #
The system must meet the following minimum hardware requirements:
Requirement | Minimum Value |
---|---|
Physical memory (RAM) | 256 MB (262144 KB) |
Swap space | 512 MB (524288 KB) or twice the size of RAM
On systems with 2 GB or more of RAM, the swap space can be between one and two times the size of RAM |
Disk space in /tmp
|
400 MB (409600 KB) |
Disk space for software files | 700 MB (716800 KB) to install only Oracle HTTP Server, or 1 GB (1048576 KB) to install Oracle HTTP Server and Oracle HTML DB |
System architecture | 64-bit |
To ensure that the system meets these requirements, follow these steps:
To determine the physical RAM size, enter the following command:
# /usr/sbin/dmesg | grep "Physical:"
If the size of the physical RAM installed in the system is less than 256 MB, you must install more memory before continuing.
To determine the size of the configured swap space, enter the following command:
# /usr/sbin/swapinfo -a
If necessary, see your operating system documentation for information about how to configure additional swap space.
To determine the amount of free disk space available in the /tmp
directory, enter the following command:
# bdf /tmp
If there is less than 400 MB of disk space available in the /tmp
directory, complete one of the following steps:
Delete unnecessary files from the /tmp
directory to achieve the required disk space.
Set the TEMP and TMPDIR environment variables when setting the oracle
user’s environment (described later).
Extend the file system that contains the /tmp
directory. If necessary, contact your system administrator for information about extending file systems.
To determine the amount of free disk space available on the system, enter the following command:
# bdf
This command displays the disk space usage on all mounted file systems. To complete the installation, identify a file system with sufficient disk space.
To determine whether the system architecture is 64-bit, enter the following command:
# /bin/getconf KERNEL_BITS
This command should return the following output. If you do not see the expected output, you cannot install the software on this system.
64
The system must meet the following minimum software requirements:
The version of HP-UX must be HP-UX 11i v2 (11.23).
The following patches must be installed:
PHSS_29658: Aries cumulative patch
PHSS_29660: linker + fdp cumulative patch
You must install any additional recommended patches for Java SDK 1.4.2.
See the following Web site for a list of patches required by Java SDK 1.4.2:
http://www.hp.com/products1/unix/java/patches/index.html
To ensure that the system meets these requirements, follow these steps:
To determine which version of HP-UX is installed, enter the following command:
# uname -a HP-UX hostname B.11.23 U ia64 2359460360 unlimited-user license
In this example, the version of HP-UX 11i is 11.23.
To determine whether a patch is installed, enter a command similar to the following:
# /usr/sbin/swlist -l patch | grep PHSS_29658
Alternatively, to list all installed patches, enter the following command:
# /usr/sbin/swlist -l patch | more
If a required patch is not installed, download it from the following URL and install it:
http://itresourcecenter.hp.com
The following local UNIX group and user must exist on the system:
The oinstall
group (the Oracle Inventory group)
The oracle
user (the Oracle software owner)
The oinstall
group and the oracle
user may already exist on your system. To determine whether they exist already, and if necessary, to create them, follow these steps:
To determine whether the oinstall
group exists, enter the following command:
# grep oinstall /etc/group
If the output from this command shows the specified group name, that group already exists.
If necessary, enter the following command to create the oinstall
group:
# /usr/sbin/groupadd oinstall
To determine whether the oracle
user exists and belongs to the correct groups, enter the following command:
# id oracle
If the oracle
user exists, this command displays information about the groups to which the user belongs. The output should be similar to the following, indicating that oinstall
is the primary group:
uid=502(oracle) gid=502(oinstall) groups=502(oinstall),503(dba)
If necessary, complete one of the following actions:
If the oracle
user exists, but its primary group is not oinstall
, enter a command similar to the following, where the -g
option specifies oinstall
as the primary group and the -G
option specifies any existing groups to which the oracle
user belongs:
# /usr/sbin/usermod -g oinstall -G dba oracle
If the oracle
user does not exist, enter the following command to create it:
# /usr/sbin/useradd -g oinstall -G dba oracle
This command creates the oracle
user and specifies:
oinstall
as the primary group
dba
as an optional secondary group
Enter the following command to set the password of the oracle
user:
# passwd oracle
Create an Oracle base directory with a name similar to the following and specify the correct owner, group, and permissions for it:
/u01/app/oracle
The Oracle base directory must have either 700 MB (716800 KB) of free disk space to install only Oracle HTTP Server or 1 GB (1048576 KB) of free disk space to install Oracle HTTP Server and Oracle HTML DB.
To determine where to create this directory, follow these steps:
Enter the following command to display information about all mounted file systems:
# bdf
This command displays information about all of the file systems mounted on the system, including:
The physical device name
The total amount, used amount, and available amount of disk space, in kilobytes
The mount point directory for that file system
From the display, identify a file system that has sufficient disk space.
Note the name of the mount point directory for the file system that you identified.
In the following examples, /u01
is the mount point directory used for the software. You must specify the appropriate mount point directory for the file system on your system.
To create the required directory and specify the correct owner, group, and permissions for it, follow these steps:
Note: In the following procedure, replace/u01 with the appropriate mount point directory that you identified in Step 3 previously.
|
Enter the following command to create subdirectories in the mount point directory that you identified for the Oracle base directory:
# mkdir -p /u01/app/oracle
Change the owner and group of the directory that you created to the oracle
user and the oinstall
group:
# chown -R oracle:oinstall /u01/app/oracle
Change the permissions on the directory that you created to 775:
# chmod -R 775 /u01/app/oracle
The Oracle software is available on both CD-ROM and DVD-ROM. These discs are in ISO 9660 format with Rockridge extensions.
To mount the product disc, follow these steps:
If necessary, enter a command similar to following to unmount the currently mounted disc, then remove it from the drive:
# /usr/sbin/umount /SD_CDROM
In this example, /SD_CDROM
is the mount point directory for the CD-ROM drive.
Insert the disc into the CD-ROM or DVD-ROM drive.
To mount the disc, enter a command similar to the following:
# /usr/sbin/mount -F cdfs -o rr /dev/dsk/cxtydz /SD_CDROM
In this example, /SD_CDROM
is the CD-ROM mount point directory and /dev/dsk/c
x
t
y
d
z
is the device name for the CD-ROM device, for example /dev/dsk/c0t2d0
.
You run the Installer from the oracle
account. However, before you start the Installer you must configure the environment of the oracle
user. To configure the environment, you must:
Set the default file mode creation mask (umask) to 022 in the shell startup file.
Set the DISPLAY and ORACLE_BASE environment variables.
To set the oracle
user’s environment, follow these steps:
Start another terminal session.
Enter the following command to ensure that X Window applications can display on this system:
$ xhost +
Complete one of the following steps:
If the terminal session is not connected to the system where you want to install the software, log in to that system as the oracle
user.
If the terminal session is connected to the system where you want to install the software, switch user to oracle
:
$ su - oracle
To determine the default shell for the oracle
user, enter the following command:
$ echo $SHELL
Open the oracle
user’s shell startup file in any text editor:
Bourne shell (sh
), Bash shell (bash
), or Korn shell (ksh
):
$ vi .profile
C shell (csh
or tcsh
):
% vi .login
Enter or edit the following line in the shell startup file, specifying a value of 022 for the default file mode creation mask:
umask 022
Save the file and exit from the editor.
To run the shell startup script, enter the following command:
Bourne, Bash, or Korn shell:
$ . ./.profile
C shell:
% source ./.login
If you determined that the /tmp
directory had insufficient free disk space when checking the hardware requirements, enter the following commands to set the TEMP and TMPDIR environment variables. Specify a directory on a file system with sufficient free disk space.
Bourne, Bash, or Korn shell:
$ TEMP=/directory $ TMPDIR=/directory $ export TEMP TMPDIR
C shell:
% setenv TEMP /directory % setenv TMPDIR /directory
If you are not installing the software on the local system, enter the following command to direct X applications to display on the local system:
Bourne, Bash, or Korn shell:
$ DISPLAY=local_host
:0.0 ; export DISPLAY
C shell:
% setenv DISPLAY local_host
:0.0
In this example, local_host
is the host name or IP address of the system you want to use to display the Installer (your workstation or PC).
Enter commands similar to the following to set the ORACLE_BASE environment variable:
Bourne, Bash, or Korn shell:
$ ORACLE_BASE=/u01/app/oracle $ export ORACLE_BASE
C shell:
% setenv ORACLE_BASE /u01/app/oracle
In these examples, /u01/app/oracle
is the Oracle base directory that you created earlier.
Enter the following commands to ensure that the ORACLE_HOME and TNS_ADMIN environment variables are not set:
Bourne, Bash, or Korn shell:
$ unset ORACLE_HOME $ unset TNS_ADMIN
C shell:
% unsetenv ORACLE_HOME % unsetenv TNS_ADMIN
To verify that the environment has been set correctly, enter the following commands:
$ umask $ env | more
Verify that the umask
command displays a value of 022
and the environment variables that you set in this section have the correct values.
After configuring the oracle
user’s environment, start the Installer and install the Oracle software, as follows:
Note: The following examples show paths to therunInstaller script on a CD-ROM. If you are installing the software from DVD-ROM, use a command similar to the following:
$ /mount_point/companion/runInstaller |
To start the Installer, enter the following commands:
$ cd /tmp $ /SD_CDROM/runInstaller
If the Installer does not appear, see the Oracle Database Companion CD Installation Guide for UNIX Systems for information about how to troubleshoot X display problems.
Use the following guidelines to complete the installation:
The following table describes the recommended action for each Installer screen.
Note: If you have completed the tasks listed previously, you can complete the installation by choosing the default values on most screens. |
If you need more assistance, or if you want to choose an option that is not a default, click Help for additional information.
If you encounter errors while installing or linking the software, see the Oracle Database Companion CD Installation Guide for UNIX Systems for information about troubleshooting.
Screen | Recommended Action |
---|---|
Welcome | Click Next. |
Specify Inventory Directory and Credentials | Note: This screen appears only during the first installation of Oracle products on a system.
Specify the following information, then click Next: Enter the full path of the inventory directory Verify that the path is similar to the following, where oracle_base/oraInventory Specify operating system group name Verify that the group specified is the Oracle Inventory group: oinstall |
Run orainstRoot.sh | If prompted, run the following script in a separate terminal window as the root user:
oracle_base/oraInventory/orainstRoot.sh |
Specify File Locations | In the Destination section, specify values similar to the following for a new Oracle home directory, then click Next:
Name OraDb10g_Home1 Path oracle_base/product/10.1.0/companion_1 |
Select a Product to Install | Select Oracle Database 10g Companion Products, then click Next. |
Available Product Components | Select Apache Standalone to install Oracle HTTP Server, and optionally select HTML DB, then click Next. |
Enter HTML DB Configuration Information | Specify the following information, then click Next:
Hostname Specify the host name of the system where the database is installed. Port Specify the TCP/IP port number for the Oracle Net listener on the database system. The default port number is 1521. Database Service Name Specify the database service name for the database where you want to install the Oracle HTML DB database objects. The database service name is usually the same as the global database name for the database, for example, SYS Password Specify the password for the SYS user in the database. HTML DB Password Specify the password that you want to use for the HTML DB schemas (users), which are created in the database during the installation. After the installation, you can use this password to connect to Oracle HTML DB as the ADMIN user. The password that you specify is also used for the HTMLDB_PUBLIC_USER schema, which is used by mod_plsql to connect to the database. Confirm HTML DB Password Enter the password again to verify that you have specified it correctly. TABLESPACE Name Enter the name of the tablespace where you want to load the Oracle HTML DB database objects, or accept the default (SYSAUX). |
Summary | Review the information displayed, then click Install. |
Install | The Install screen displays status information while the product is being installed. |
Configuration Assistants | The Configuration Assistants screen displays status information for the configuration assistants that configure the software. |
Setup Privileges | If prompted, run the following script in a separate terminal window as the root user:
oracle_home/root.sh In this example, When the script finishes, click OK. |
End of Installation | Make a note of the URL for the Oracle HTTP Server home page. This information is also available in the following file:
oracle_home/Apache/Apache/setupinfo.txt To exit from the Installer, click Exit, then click Yes. |
To enable Oracle HTML DB to access the database, you must configure a Database Access Descriptor (DAD) as follows:
Using any text editor, edit the following file, deleting all of the lines in the file except the first line:
$ORACLE_HOME/Apache/modplsql/conf/marvel.conf
In a Web browser, access the Oracle HTTP Server home page:
http://hostname:port/
Select Mod_plsql Configuration Menu.
Select Gateway Database Access Descriptor Settings.
Select Add Default (blank configuration).
On the Database Access Descriptor page, enter the values for the fields listed in the following table:
Note: Only enter values for the fields listed in the table. |
Field | Value |
---|---|
Database Access Descriptor Name | htmldb |
Oracle User Name | HTMLDB_PUBLIC_USER |
Oracle Password | Password specified for HTML DB during the installation |
Oracle Connect String | The connect string for the database where the HTML DB objects are installed, in the following format:
host:port:service_name |
Enable Connection Pooling? | No |
Default (Home) Page | htmldb |
Document Table | WWW_FLOW_FILE_OBJECTS$ |
Document Access Path | docs
|
Document Access Procedure | WWW_FLOW_FILE_MANAGER.PROCESS_DOWNLOAD |
Enter the following command to restart Oracle HTTP Server:
$ $ORACLE_HOME/Apache/Apache/bin/apachectl restart
After you have successfully installed Oracle HTTP Server and Oracle HTML DB, complete the following steps:
Use a Web browser to access the Oracle HTTP Server home page, using the URL displayed at the end of the installation. The default URL is similar to the following:
http://host.domain:7777/
Use a Web browser to access the Oracle HTML DB administration page:
http://host.domain:7777/pls/htmldb/htmldb_admin
Log in to Oracle HTML DB using the user name ADMIN and the password that you specified during the installation.
See the online help and the Oracle HTML DB User’s Guide to learn about using, developing applications with, and administering Oracle HTML DB.
See Chapter 5 in the Oracle Database Companion CD Installation Guide for UNIX Systems for information about required and optional post-installation steps.
Our goal is to make Oracle products, services, and supporting documentation accessible, with good usability, to the disabled community. To that end, our documentation includes features that make information available to users of assistive technology. This documentation is available in HTML format, and contains markup to facilitate access by the disabled community. Standards will continue to evolve over time, and Oracle is actively engaged with other market-leading technology vendors to address technical obstacles so that our documentation can be accessible to all of our customers. For additional information, visit the Oracle Accessibility Program Web site at
http://www.oracle.com/accessibility/
JAWS, a Windows screen reader, may not always correctly read the code examples in this document. The conventions for writing code require that closing braces should appear on an otherwise empty line; however, JAWS may not always read a line of text that consists solely of a bracket or brace.
This documentation may contain links to Web sites of other companies or organizations that Oracle does not own or control. Oracle neither evaluates nor makes any representations regarding the accessibility of these Web sites.
Oracle provides dedicated Text Telephone (TTY) access to Oracle Support Services within the United States of America 24 hours a day, seven days a week:
For technical questions, call 1.800.446.2398
For non-technical questions, call 1.800.464.2330