Skip Headers

Oracle® Database Client Quick Installation Guide
10g Release 1 (10.1.0.2.0) for Windows
Part No. B13691-01
 

 

Copyright © 1996, 2004  Oracle. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners.

Oracle® Database

Client Quick Installation Guide

10g Release 1 (10.1.0.2.0) for Windows

Part No. B13691-01

March 2004

This guide describes how to quickly install Oracle Database Client on Windows systems. It includes information about the following:

  1. Documentation Accessibility

  2. Review Information About this Guide

  3. Software Requirements

  4. Hardware Requirements

  5. Install the Oracle Database Client Software

  6. What to Do Next

1 Documentation Accessibility

Our goal is to make Oracle products, services, and supporting documentation accessible, with good usability, to the disabled community. To that end, our documentation includes features that make information available to users of assistive technology. This documentation is available in HTML format, and contains markup to facilitate access by the disabled community. Standards will continue to evolve over time, and Oracle is actively engaged with other market-leading technology vendors to address technical obstacles so that our documentation can be accessible to all of our customers. For additional information, visit the Oracle Accessibility Program Web site at

http://www.oracle.com/accessibility/
Accessibility of Code Examples in Documentation

JAWS, a Windows screen reader, may not always correctly read the code examples in this document. The conventions for writing code require that closing braces should appear on an otherwise empty line; however, JAWS may not always read a line of text that consists solely of a bracket or brace.

Accessibility of Links to External Web Sites in Documentation

This documentation may contain links to Web sites of other companies or organizations that Oracle does not own or control. Oracle neither evaluates nor makes any representations regarding the accessibility of these Web sites.

2 Review Information About this Guide


Note:

This guide describes how to install Oracle Database Client on a system that does not have any Oracle software installed on it. If there is an existing Oracle software installation on this system, see Oracle Database Client Installation Guide for Windows for more detailed installation instructions.

This guide describes how to complete a default installation of Oracle Database Client in a new Oracle home directory. It describes how to perform one of the following installation types:


See Also:

Oracle Call Interface Programmer’s Guide for more information about the Instant Client feature


Where to Get Additional Installation Information

For more detailed information about installing Oracle Database Client, see Oracle Database Client Installation Guide for Windows.

This guide is available on the product compact disc. To access it, use a Web browser to open the welcome.htm file, either in the top-level directory on the CD-ROM or in the client directory on the DVD-ROM, then select the Documentation tab.

3 Software Requirements

Table 1 lists the software requirements for Oracle Database Client.

Table 1 Oracle Database Client Software Requirements

Requirement Value
System Architecture 32-bit
Operating System Oracle Database Client for Windows is supported on the following operating systems:
  • Windows NT Server 4.0, Windows NT Server Enterprise Edition 4.0, and Terminal Server Edition with service pack 6a or higher. Windows NT Workstation is no longer supported.

  • Windows 2000 with service pack 1 or higher. All editions, including Terminal Services and Windows 2000 MultiLanguage Edition (MLE), are supported.

  • Windows Server 2003

  • Windows XP Professional

Windows Multilingual User Interface Pack is supported on Windows XP Professional and Windows Server 2003.

Compiler Oracle C++ Call Interface supports the following compilers: Microsoft Visual C++ 6.0, Microsoft Visual C++ .NET 2002, Microsoft Visual C++ .NET 2003, Intel Proton

Oracle Call Interface supports the following compilers: Microsoft Visual C++ 6.0, Microsoft Visual C++ .NET 2002, and Microsoft Visual C++ .NET 2003

External callouts support the following compilers: Microsoft Visual C++ 6.0, Microsoft Visual C++ .NET 2002, and Microsoft Visual C++ .NET 2003

PL/SQL native compilation supports the following compilers: Microsoft Visual C++ 6.0, Microsoft Visual C++ .NET 2002, and Microsoft Visual C++ .NET 2003

Pro*COBOL supports Micro Focus NetExpress. Object Oriented COBOL (OOCOBOL) specifications are not supported.

XDK supports the following compilers: Microsoft Visual C++ 6.0, Microsoft Visual Studio .NET 2002, and Microsoft Visual Studio .NET 2003

Network Protocol The Oracle Net foundation layer uses Oracle protocol support to communicate with the following industry-standard network protocols:
  • TCP/IP

  • TCP/IP with SSL

  • Named Pipes


4 Hardware Requirements

The following hardware components are required for Oracle Database Client:

4.1 Hard Disk Space Requirements

This section lists system requirements for NT File System (NTFS) file systems. FAT32 space requirements are slightly larger. Oracle recommends installing Oracle components on NTFS.

The NTFS system requirements listed in this section are more accurate than the hard disk values reported by the Oracle Universal Installer Summary screen. The Summary screen does not include the space required to create a database or the size of compressed files that are expanded on the hard drive.

The hard disk requirements for Oracle Database Client components include space required to install Java Runtime Environment (JRE) and Oracle Universal Installer on the partition where the operating system is installed. If sufficient space is not detected, then installation fails and an error message appears.

Table 2 lists the space requirements for NTFS.

Table 2 Hard Disk Space Requirements for NTFS

Installation Type System Drive Oracle Home
Administrator 80 MB 485 MB
Runtime 70 MB 240 MB
Instant Client 70 MB 88 MB


See Also:

"About NTFS File System and Windows Registry Permissions" in Oracle Database Platform Guide for Windows

To ensure that the system meets these requirements, follow these steps:

  1. Determine the physical RAM size. For a computer using Windows 2000, for example, open the System control panel and select the General tab. If the size of the physical RAM installed in the system is less than the required size, then you must install more memory before continuing.

  2. Determine the size of the configured swap space (also known as paging file size). For a computer using Windows 2000, for example, open the System control panel, select the Advanced tab, and click Performance Options.

    If necessary, see your operating system documentation for information about how to configure additional swap space.

  3. Determine the amount of free disk space on the system. For a computer using Windows 2000, for example, open My Computer, right-click the drive where the Oracle software is to be installed, and choose Properties.

  4. Determine the amount of disk space available in the temp directory. This is equivalent to the total amount of free disk space, minus what will be needed for the Oracle software to be installed.

    If there is less than 100 MB of disk space available in the temp directory, then first delete all unnecessary files. If the temp disk space is still less than 100 MB, then set the TEMP or TMP environment variable to point to a different hard drive. For a computer using Windows 2000, for example, open the System control panel, select the Advanced tab, and click Environment Variables.

5 Install the Oracle Database Client Software

The following sections describe how to install the Oracle software:

5.1 Reviewing Product-Specific Installation Guidelines

Review the following guidelines before starting Oracle Universal Installer:

  • Do not use Oracle Universal Installer from an earlier Oracle product release to install components from this release.

  • Reinstalling Oracle Software

    If you reinstall Oracle software into an Oracle home directory where Oracle Database Client is already installed, then you must also reinstall any components that were installed before you began the reinstallation.

5.2 Running Oracle Universal Installer


Note:

Use the same installation media to install Oracle Database Client on all supported Windows platforms.


See Also:

For instructions on installing Oracle Database Client without using the installation media, see Oracle Database Client Installation Guide for Windows

Start Oracle Universal Installer and install the software, as follows:

  1. Insert the CD labeled Oracle Database Client.

    The Autorun screen automatically appears. If the Autorun screen does not appear, then:

    1. Choose Start > Run.

    2. Enter the following:

      DRIVE_LETTER:\autorun\autorun.exe
      
      

      The Autorun screen appears.

  2. Choose Install/Deinstall Products from the Autorun screen.

    The Welcome screen appears.Table 3 lists the recommended action for each screen.

  3. Use the following guidelines to complete the installation:

    • Follow the instructions displayed in the Oracle Universal Installer screens. If you need additional information, click Help.

    • Do not install Oracle Database 10g release 1 (10.1) software into an existing Oracle home that contains Oracle9i or earlier software.

    • Do not modify the Java Runtime Environment (JRE) except by using a patch provided by Oracle Support Services. Oracle Universal Installer automatically installs the Oracle-supplied version of the JRE. This version is required to run Oracle Universal Installer and several Oracle assistants.

    • If you chose an installation type that runs Oracle Net Configuration Assistant in interactive mode, then you must provide detailed information about configuring your database and network. If you need assistance when using Oracle Net Configuration Assistant in interactive mode, then click Help on any screen.


      Note:

      If you chose a default installation, then Oracle Net Configuration Assistant runs non-interactively.

  4. When all of the configuration tools have finished, click Exit, then click Yes to exit from Oracle Universal Installer.

  5. Optionally, delete the \temp\OraInstalldate_time directory if you want to remove the temporary files that were created during the installation process. The OraInstalldate_time directory holds about 45 MB of files.

    Restarting your computer also removes the OraInstalldate_time directory.

Table 3 Oracle Universal Installer Screens

Screen Recommended Action
Welcome Click Next.
Specify File Locations In the Destination section, accept the default values or enter the Oracle home name and directory path in which to install Oracle components.

Click Next.

Select Installation Type Select Instant Client, Administrator, Runtime, or Custom.

Click Next.

Summary Review the information displayed, then click Install.
Install The Install screen displays status information while the product is being installed.
Configuration Assistants The Configuration Assistants screen displays status information for the configuration assistants that configure the software.
Oracle Net Configuration Assistant: Welcome You can choose Naming Methods configuration or let Oracle Net Configuration Assistant complete a typical configuration for you. If you want to choose, simply click Next. If you want a typical configuration, first click the Perform typical configuration checkbox and then click Next.
Oracle Net Configuration Assistant: Naming Methods Configuration, Select Naming Methods This screen appears only if you did not click the Perform typical configuration checkbox. Local Naming, the recommended naming method, is preselected. But you can remove it, add other naming methods, or change the order of selected naming methods by first clicking on the naming method and then clicking on the arrow keys. When you are done selecting naming methods, click Next.
Oracle Net Configuration Assistant: Net Service Name Configuration, Service Name This screen appears only if you did not click the Perform typical configuration checkbox. Enter the service name of the database or other service you want to access and click Next.
Oracle Net Configuration Assistant: Net Service Name Configuration, Select Protocols This screen appears only if you did not click the Perform typical configuration checkbox. Select the protocol used by the database you want to access and click Next.
Oracle Net Configuration Assistant: Net Service Name Configuration, Your Protocol This screen appears only if you did not click the Perform typical configuration checkbox, and its contents depend on which protocol you chose in the previous screen. If you chose TCP or TCPS, then this screen asks for a Host name and port number. If you chose IPC, then this screen asks for an IPC Key value. If you chose NMP, then this screen asks for a Computer Name and a pipe name. Supply the needed information and click Next.
Oracle Net Configuration Assistant: Net Service Name Configuration, Test This screen appears only if you did not click the Perform typical configuration checkbox. It offers a pair of radio buttons enabling you to test or not test your connection to the database. Make your choice and click Next.
Oracle Net Configuration Assistant: Net Service Name Configuration, Connecting This screen appears only if you chose to test the connection in the previous screen. If the connection does not succeed, then this screen instructs you to click Back to review the connection information you supplied or click Change Login to change username, password, or both. Click Next.
Oracle Net Configuration Assistant: Net Service Name This screen appears only if you did not click the Perform typical configuration checkbox. It lets you enter a name for this net service name. The default is the service name you entered earlier. Click Next.
Oracle Net Configuration Assistant: Another Net Service Name? This screen appears only if you did not click the Perform typical configuration checkbox. It asks if you want to enter another name for this net service name. Click Next.
Oracle Net Configuration Assistant: Net Service Name Configuration Done This screen appears only if you did not click the Perform typical configuration checkbox. It tells you that net service name configuration is complete. Click Next.
Oracle Net Configuration Assistant: Naming Methods Configuration Done This screen appears only if you did not click the Perform typical configuration checkbox. It tells you that naming methods configuration is complete. Click Next.
Oracle Net Configuration Assistant: Done Click Finish.
End of Installation The End of Installation screen tells you installation was successful.

Click Exit, then click Yes.


6 What to Do Next

After you have successfully installed Oracle Database Client, see Chapter 4, "Postinstallation Tasks" in Oracle Database Client Installation Guide for Windows for information about required and optional postinstallation steps.