Java™ Platform
Standard Ed. 6

java.nio.charset
Class CharsetDecoder

java.lang.Object
  extended by java.nio.charset.CharsetDecoder

public abstract class CharsetDecoder
extends Object

An engine that can transform a sequence of bytes in a specific charset into a sequence of sixteen-bit Unicode characters.

The input byte sequence is provided in a byte buffer or a series of such buffers. The output character sequence is written to a character buffer or a series of such buffers. A decoder should always be used by making the following sequence of method invocations, hereinafter referred to as a decoding operation:

  1. Reset the decoder via the reset method, unless it has not been used before;

  2. Invoke the decode method zero or more times, as long as additional input may be available, passing false for the endOfInput argument and filling the input buffer and flushing the output buffer between invocations;

  3. Invoke the decode method one final time, passing true for the endOfInput argument; and then

  4. Invoke the flush method so that the decoder can flush any internal state to the output buffer.

Each invocation of the decode method will decode as many bytes as possible from the input buffer, writing the resulting characters to the output buffer. The decode method returns when more input is required, when there is not enough room in the output buffer, or when a decoding error has occurred. In each case a CoderResult object is returned to describe the reason for termination. An invoker can examine this object and fill the input buffer, flush the output buffer, or attempt to recover from a decoding error, as appropriate, and try again.

There are two general types of decoding errors. If the input byte sequence is not legal for this charset then the input is considered malformed. If the input byte sequence is legal but cannot be mapped to a valid Unicode character then an unmappable character has been encountered.

How a decoding error is handled depends upon the action requested for that type of error, which is described by an instance of the CodingErrorAction class. The possible error actions are to ignore the erroneous input, report the error to the invoker via the returned CoderResult object, or replace the erroneous input with the current value of the replacement string. The replacement has the initial value "\uFFFD"; its value may be changed via the replaceWith method.

The default action for malformed-input and unmappable-character errors is to report them. The malformed-input error action may be changed via the onMalformedInput method; the unmappable-character action may be changed via the onUnmappableCharacter method.

This class is designed to handle many of the details of the decoding process, including the implementation of error actions. A decoder for a specific charset, which is a concrete subclass of this class, need only implement the abstract decodeLoop method, which encapsulates the basic decoding loop. A subclass that maintains internal state should, additionally, override the implFlush and implReset methods.

Instances of this class are not safe for use by multiple concurrent threads.

Since:
1.4
See Also:
ByteBuffer, CharBuffer, Charset, CharsetEncoder

Constructor Summary
protected CharsetDecoder(Charset cs, float averageCharsPerByte, float maxCharsPerByte)
          Initializes a new decoder.
 
Method Summary
 float averageCharsPerByte()
          Returns the average number of characters that will be produced for each byte of input.
 Charset charset()
          Returns the charset that created this decoder.
 CharBuffer decode(ByteBuffer in)
          Convenience method that decodes the remaining content of a single input byte buffer into a newly-allocated character buffer.
 CoderResult decode(ByteBuffer in, CharBuffer out, boolean endOfInput)
          Decodes as many bytes as possible from the given input buffer, writing the results to the given output buffer.
protected abstract  CoderResult decodeLoop(ByteBuffer in, CharBuffer out)
          Decodes one or more bytes into one or more characters.
 Charset detectedCharset()
          Retrieves the charset that was detected by this decoder  (optional operation).
 CoderResult flush(CharBuffer out)
          Flushes this decoder.
protected  CoderResult implFlush(CharBuffer out)
          Flushes this decoder.
protected  void implOnMalformedInput(CodingErrorAction newAction)
          Reports a change to this decoder's malformed-input action.
protected  void implOnUnmappableCharacter(CodingErrorAction newAction)
          Reports a change to this decoder's unmappable-character action.
protected  void implReplaceWith(String newReplacement)
          Reports a change to this decoder's replacement value.
protected  void implReset()
          Resets this decoder, clearing any charset-specific internal state.
 boolean isAutoDetecting()
          Tells whether or not this decoder implements an auto-detecting charset.
 boolean isCharsetDetected()
          Tells whether or not this decoder has yet detected a charset  (optional operation).
 CodingErrorAction malformedInputAction()
          Returns this decoder's current action for malformed-input errors.
 float maxCharsPerByte()
          Returns the maximum number of characters that will be produced for each byte of input.
 CharsetDecoder onMalformedInput(CodingErrorAction newAction)
          Changes this decoder's action for malformed-input errors.
 CharsetDecoder onUnmappableCharacter(CodingErrorAction newAction)
          Changes this decoder's action for unmappable-character errors.
 String replacement()
          Returns this decoder's replacement value.
 CharsetDecoder replaceWith(String newReplacement)
          Changes this decoder's replacement value.
 CharsetDecoder reset()
          Resets this decoder, clearing any internal state.
 CodingErrorAction unmappableCharacterAction()
          Returns this decoder's current action for unmappable-character errors.
 
Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait
 

Constructor Detail

CharsetDecoder

protected CharsetDecoder(Charset cs,
                         float averageCharsPerByte,
                         float maxCharsPerByte)
Initializes a new decoder. The new decoder will have the given chars-per-byte values and its replacement will be the string "\uFFFD".

Parameters:
averageCharsPerByte - A positive float value indicating the expected number of characters that will be produced for each input byte
maxCharsPerByte - A positive float value indicating the maximum number of characters that will be produced for each input byte
Throws:
IllegalArgumentException - If the preconditions on the parameters do not hold
Method Detail

charset

public final Charset charset()
Returns the charset that created this decoder.

Returns:
This decoder's charset

replacement

public final String replacement()
Returns this decoder's replacement value.

Returns:
This decoder's current replacement, which is never null and is never empty

replaceWith

public final CharsetDecoder replaceWith(String newReplacement)
Changes this decoder's replacement value.

This method invokes the implReplaceWith method, passing the new replacement, after checking that the new replacement is acceptable.

Parameters:
newReplacement - The new replacement; must not be null and must have non-zero length
Returns:
This decoder
Throws:
IllegalArgumentException - If the preconditions on the parameter do not hold

implReplaceWith

protected void implReplaceWith(String newReplacement)
Reports a change to this decoder's replacement value.

The default implementation of this method does nothing. This method should be overridden by decoders that require notification of changes to the replacement.

Parameters:
newReplacement -

malformedInputAction

public CodingErrorAction malformedInputAction()
Returns this decoder's current action for malformed-input errors.

Returns:
The current malformed-input action, which is never null

onMalformedInput

public final CharsetDecoder onMalformedInput(CodingErrorAction newAction)
Changes this decoder's action for malformed-input errors.

This method invokes the implOnMalformedInput method, passing the new action.

Parameters:
newAction - The new action; must not be null
Returns:
This decoder
Throws:
IllegalArgumentException - If the precondition on the parameter does not hold

implOnMalformedInput

protected void implOnMalformedInput(CodingErrorAction newAction)
Reports a change to this decoder's malformed-input action.

The default implementation of this method does nothing. This method should be overridden by decoders that require notification of changes to the malformed-input action.


unmappableCharacterAction

public CodingErrorAction unmappableCharacterAction()
Returns this decoder's current action for unmappable-character errors.

Returns:
The current unmappable-character action, which is never null

onUnmappableCharacter

public final CharsetDecoder onUnmappableCharacter(CodingErrorAction newAction)
Changes this decoder's action for unmappable-character errors.

This method invokes the implOnUnmappableCharacter method, passing the new action.

Parameters:
newAction - The new action; must not be null
Returns:
This decoder
Throws:
IllegalArgumentException - If the precondition on the parameter does not hold

implOnUnmappableCharacter

protected void implOnUnmappableCharacter(CodingErrorAction newAction)
Reports a change to this decoder's unmappable-character action.

The default implementation of this method does nothing. This method should be overridden by decoders that require notification of changes to the unmappable-character action.


averageCharsPerByte

public final float averageCharsPerByte()
Returns the average number of characters that will be produced for each byte of input. This heuristic value may be used to estimate the size of the output buffer required for a given input sequence.

Returns:
The average number of characters produced per byte of input

maxCharsPerByte

public final float maxCharsPerByte()
Returns the maximum number of characters that will be produced for each byte of input. This value may be used to compute the worst-case size of the output buffer required for a given input sequence.

Returns:
The maximum number of characters that will be produced per byte of input

decode

public final CoderResult decode(ByteBuffer in,
                                CharBuffer out,
                                boolean endOfInput)
Decodes as many bytes as possible from the given input buffer, writing the results to the given output buffer.

The buffers are read from, and written to, starting at their current positions. At most in.remaining() bytes will be read and at most out.remaining() characters will be written. The buffers' positions will be advanced to reflect the bytes read and the characters written, but their marks and limits will not be modified.

In addition to reading bytes from the input buffer and writing characters to the output buffer, this method returns a CoderResult object to describe its reason for termination:

In any case, if this method is to be reinvoked in the same decoding operation then care should be taken to preserve any bytes remaining in the input buffer so that they are available to the next invocation.

The endOfInput parameter advises this method as to whether the invoker can provide further input beyond that contained in the given input buffer. If there is a possibility of providing additional input then the invoker should pass false for this parameter; if there is no possibility of providing further input then the invoker should pass true. It is not erroneous, and in fact it is quite common, to pass false in one invocation and later discover that no further input was actually available. It is critical, however, that the final invocation of this method in a sequence of invocations always pass true so that any remaining undecoded input will be treated as being malformed.

This method works by invoking the decodeLoop method, interpreting its results, handling error conditions, and reinvoking it as necessary.

Parameters:
in - The input byte buffer
out - The output character buffer
endOfInput - true if, and only if, the invoker can provide no additional input bytes beyond those in the given buffer
Returns:
A coder-result object describing the reason for termination
Throws:
IllegalStateException - If a decoding operation is already in progress and the previous step was an invocation neither of the reset method, nor of this method with a value of false for the endOfInput parameter, nor of this method with a value of true for the endOfInput parameter but a return value indicating an incomplete decoding operation
CoderMalfunctionError - If an invocation of the decodeLoop method threw an unexpected exception

flush

public final CoderResult flush(CharBuffer out)
Flushes this decoder.

Some decoders maintain internal state and may need to write some final characters to the output buffer once the overall input sequence has been read.

Any additional output is written to the output buffer beginning at its current position. At most out.remaining() characters will be written. The buffer's position will be advanced appropriately, but its mark and limit will not be modified.

If this method completes successfully then it returns CoderResult.UNDERFLOW. If there is insufficient room in the output buffer then it returns CoderResult.OVERFLOW. If this happens then this method must be invoked again, with an output buffer that has more room, in order to complete the current decoding operation.

If this decoder has already been flushed then invoking this method has no effect.

This method invokes the implFlush method to perform the actual flushing operation.

Parameters:
out - The output character buffer
Returns:
A coder-result object, either CoderResult.UNDERFLOW or CoderResult.OVERFLOW
Throws:
IllegalStateException - If the previous step of the current decoding operation was an invocation neither of the flush method nor of the three-argument decode method with a value of true for the endOfInput parameter

implFlush

protected CoderResult implFlush(CharBuffer out)
Flushes this decoder.

The default implementation of this method does nothing, and always returns CoderResult.UNDERFLOW. This method should be overridden by decoders that may need to write final characters to the output buffer once the entire input sequence has been read.

Parameters:
out - The output character buffer
Returns:
A coder-result object, either CoderResult.UNDERFLOW or CoderResult.OVERFLOW

reset

public final CharsetDecoder reset()
Resets this decoder, clearing any internal state.

This method resets charset-independent state and also invokes the implReset method in order to perform any charset-specific reset actions.

Returns:
This decoder

implReset

protected void implReset()
Resets this decoder, clearing any charset-specific internal state.

The default implementation of this method does nothing. This method should be overridden by decoders that maintain internal state.


decodeLoop

protected abstract CoderResult decodeLoop(ByteBuffer in,
                                          CharBuffer out)
Decodes one or more bytes into one or more characters.

This method encapsulates the basic decoding loop, decoding as many bytes as possible until it either runs out of input, runs out of room in the output buffer, or encounters a decoding error. This method is invoked by the decode method, which handles result interpretation and error recovery.

The buffers are read from, and written to, starting at their current positions. At most in.remaining() bytes will be read, and at most out.remaining() characters will be written. The buffers' positions will be advanced to reflect the bytes read and the characters written, but their marks and limits will not be modified.

This method returns a CoderResult object to describe its reason for termination, in the same manner as the decode method. Most implementations of this method will handle decoding errors by returning an appropriate result object for interpretation by the decode method. An optimized implementation may instead examine the relevant error action and implement that action itself.

An implementation of this method may perform arbitrary lookahead by returning CoderResult.UNDERFLOW until it receives sufficient input.

Parameters:
in - The input byte buffer
out - The output character buffer
Returns:
A coder-result object describing the reason for termination

decode

public final CharBuffer decode(ByteBuffer in)
                        throws CharacterCodingException
Convenience method that decodes the remaining content of a single input byte buffer into a newly-allocated character buffer.

This method implements an entire decoding operation; that is, it resets this decoder, then it decodes the bytes in the given byte buffer, and finally it flushes this decoder. This method should therefore not be invoked if a decoding operation is already in progress.

Parameters:
in - The input byte buffer
Returns:
A newly-allocated character buffer containing the result of the decoding operation. The buffer's position will be zero and its limit will follow the last character written.
Throws:
IllegalStateException - If a decoding operation is already in progress
MalformedInputException - If the byte sequence starting at the input buffer's current position is not legal for this charset and the current malformed-input action is CodingErrorAction.REPORT
UnmappableCharacterException - If the byte sequence starting at the input buffer's current position cannot be mapped to an equivalent character sequence and the current unmappable-character action is CodingErrorAction.REPORT
CharacterCodingException

isAutoDetecting

public boolean isAutoDetecting()
Tells whether or not this decoder implements an auto-detecting charset.

The default implementation of this method always returns false; it should be overridden by auto-detecting decoders to return true.

Returns:
true if, and only if, this decoder implements an auto-detecting charset

isCharsetDetected

public boolean isCharsetDetected()
Tells whether or not this decoder has yet detected a charset  (optional operation).

If this decoder implements an auto-detecting charset then at a single point during a decoding operation this method may start returning true to indicate that a specific charset has been detected in the input byte sequence. Once this occurs, the detectedCharset method may be invoked to retrieve the detected charset.

That this method returns false does not imply that no bytes have yet been decoded. Some auto-detecting decoders are capable of decoding some, or even all, of an input byte sequence without fixing on a particular charset.

The default implementation of this method always throws an UnsupportedOperationException; it should be overridden by auto-detecting decoders to return true once the input charset has been determined.

Returns:
true if, and only if, this decoder has detected a specific charset
Throws:
UnsupportedOperationException - If this decoder does not implement an auto-detecting charset

detectedCharset

public Charset detectedCharset()
Retrieves the charset that was detected by this decoder  (optional operation).

If this decoder implements an auto-detecting charset then this method returns the actual charset once it has been detected. After that point, this method returns the same value for the duration of the current decoding operation. If not enough input bytes have yet been read to determine the actual charset then this method throws an IllegalStateException.

The default implementation of this method always throws an UnsupportedOperationException; it should be overridden by auto-detecting decoders to return the appropriate value.

Returns:
The charset detected by this auto-detecting decoder, or null if the charset has not yet been determined
Throws:
IllegalStateException - If insufficient bytes have been read to determine a charset
UnsupportedOperationException - If this decoder does not implement an auto-detecting charset

Java™ Platform
Standard Ed. 6

Submit a bug or feature
For further API reference and developer documentation, see Java SE Developer Documentation. That documentation contains more detailed, developer-targeted descriptions, with conceptual overviews, definitions of terms, workarounds, and working code examples.

Copyright © 1993, 2015, Oracle and/or its affiliates. All rights reserved. Use is subject to license terms. Also see the documentation redistribution policy.

Scripting on this page tracks web page traffic, but does not change the content in any way.