/* Generated with Author-it 23.4.1.30004  12/23/2024 1:30:17 PM */
Page[0]=new Array("Title and Copyright Information","Copyright  2022, 2025, Oracle and/or its affiliates.","Primary Author: Oracle Corporation","Title and Copyright Information","46576.htm");
Page[1]=new Array("This chapter provides an overview of:","the CIC Analytics Administration application","the navigation options available for managing CIC Analytics","a roadmap for setting up CIC Analytics","Getting Started","86261.htm");
Page[2]=new Array("Video","CIC Analytics is managed using the CIC Analytics Administration application. The administration application allows you to configure and manage users, and CIC Analytics data sources for your organization.","The following applications can be used as data sources in CIC Analytics:","P6 EPPM","Primavera Unifier","Primavera Cloud","Oracle Aconex ","This document describes how to administer CIC Analytics by accomplishing the above tasks.","Administrator Privileges","As a CIC Analytics administrator, you can:","configure data sources from the above source applications","run initial loads, ODI loads, and schedule ETLs for each data source","add users as analytics consumers and analytics creators","create custom groups and assign users to these groups","manage user's privileges to access specific data sources","Managing CIC Applications Suite","If your organization is also provisioned with CIC Advisor, then you can use the administration application to also manage CIC Advisor. For more details, see the CIC Advisor Administration Guide.","With access to both the CIC applications, you can create Suite administrators and analytics administrators. For more details, see Managing CIC Suite Users.","Intended Audience","Cloud administrators responsible for managing CIC Analytics should use this document.","Construction Intelligence Cloud Analytics Administration Application Overview","86262.htm");
Page[3]=new Array("When your organization is provisioned with CIC Analytics, as a cloud administrator, you will receive the CIC Analytics Administration Application URL in a Welcome email.","Note: Cloud administrators can only be setup when CIC Analytics is initially provisioned for your organization. Ensure you provide contact details of resources you plan to designate as administrators.","To sign in as an administrator to CIC Analytics Cloud Administration Application: ","In your Welcome email, click the Administration Application URL available in the format:","https://&lt;host&gt;:&lt;port&gt;/p6rdb/login","where","&lt;host&gt;: Enter the host name or the server IP address of CIC Analytics.","&lt;port&gt;: Enter the unique port number associated with CIC Analytics.","Note: For a list of supported browser versions, see the Construction Intelligence Cloud Analytics Client System Requirements document.","In the Username field, enter the user name of the cloud administrator.","In the Password field, enter a unique alphanumeric password.","Click Sign In.","Accessing CIC Analytics Administration Application","86289.htm");
Page[4]=new Array("New customers receive an initial email from no-reply@oracle.com to activate their Oracle Cloud account. The link has an expiration date mentioned at the bottom of the email. Make sure to activate your account before the link expires. ","You will receive a separate welcome email from no-reply@primavera.oraclecloud.com that includes the URL to access CIC Analytics.","All other email communications coming from your CIC Analytics environment will be sent from no-reply@primavera.oraclecloud.com.","Tips","If you do not receive either email, check the spam or junk folder in your email account, or reach out to your customer success manager or CIC administrator.","In case you miss the activation window to activate your CIC Analytics account, reach out to your customer success manager or CIC administrator.","Add no-reply@oracle.com and no-reply@primavera.oraclecloud.com to your address book or list of approved contacts.","About Your Login Credentials","88862.htm");
Page[5]=new Array("You can reset your password for CIC Analytics at any time.","To reset your password:","Navigate to the Oracle Cloud Account Sign In page.","Select the Need help Signing in? Click here link.","On the Forgot your password page, enter your username, and then click Next.","Review the on-screen message, and click Submit.","Select Password Reset in the email you receive.","On the Reset Your Password page, complete the New Password and Confirm New Password fields.","Note: The Confirm New Password field will not be active until your new password meets the specified criteria.","Click Submit.","Select Click here to continue to navigate back to the Oracle Cloud Account Sign In page, and log in with your new password.","Note: To allow time for system processing, it is recommended that you wait a few minutes before logging in with your new password.","Reset Your Password","88878.htm");
Page[6]=new Array("This topic includes guidelines and tips regarding accessible product usage.","Oracle has also published an Accessibility Conformance Report (ACR) for the Construction Intelligence Cloud Analytics Administration application. The latest version of the CIC Analytics Administration application Accessibility Conformance Report can be accessed from Oracle's Accessibility Program Website at this link: https://www.oracle.com/corporate/accessibility/vpats.html#acrs-tab.","Assistive Technology","Users can use assistive technology, such as screen readers, with CIC Analytics Administration application.","Keyboard Shortcuts","The list of keyboard shortcuts for CIC Analytics, Administration application can be accessed here: Keyboard Shortcuts.","Product Accessibility","89153.htm");
Page[7]=new Array("You can use your keyboard to navigate throughout the CIC Analytics Administration application, and access frequently used or important functionality. Use the Tab key to cycle through elements within the application, and press Enter or Space bar to access them. Some keyboard shortcuts may change depending on the browser you use. ","Common Shortcuts","The following shortcuts are common to all pages of CIC Analytics Administration application:","Press Tab to navigate to any element.","Press Enter to click on the element.","Press the space bar to select a check box.","Press Shift+Tab to navigate back to any element.","Use the Arrow keys(LEFT and RIGHT) to select radio buttons/within the table row.","Use Arrow keys(UP and DOWN) to move through the drop-down lists/ to select values in combo boxes.","Keyboard Shortcuts","89152.htm");
Page[8]=new Array("Select a staretl process to manage any of the following data sources in the administration application:","P6 EPPM","Primavera Unifier","Oracle Primavera Cloud","Oracle Aconex","Depending on the data source set up in the administration application and the ETL you select in the @ Home  menu (P6 as shown above), the following icons display in the sidebar of the administration application.","Icon","Description","@ Home","Shows currently running STARETL processes for all data sources and enables you to stop a currently running STARETL process. ","@ User Management","Setup and manage CIC Analytics users.","@ Status","Manage and schedule ETL runs and ODI load plans, view ETL logs and status reports for a selected data source.","@ Codes","Displays a list of codes which have been enabled for project, activity, and resource data. Use this menu option to add or remove codes for a data source.","@ UDFs","Displays a list of available UDFs which have been enabled for project, activity, resource assignment, resource, and WBS data.If applicable, use this menu option to add or remove UDFs in a data source.","@ Publication Status ","View the status of recent publication runs for a selected data source.","@ Config","Configure the properties of the STARETL process for each data source.","@ Project Fields","Select the project fields that will be made available to created dashboards in CIC Analytics. ","Navigating the CIC Analytics Administration Application","86272.htm");
Page[9]=new Array("CIC Analytics can be configured for projects managed and tracked in the following source applications:","P6 EPPM cloud","Primavera Unifier ","Oracle Primavera Cloud","Oracle Aconex ","To connect CIC Analytics with your source application, you have to setup the following applications as listed in the order listed below:","The source applications you wish to connect with CIC Analytics listed above.","CIC Analytics Administration application","The application setup roadmap illustrates the applications you need to setup to display projects in CIC Analytics.","Note: At this point in the setup sequence, you must have completed and configured your source applications if applicable (step 1). For more details, see Setting Up Source Applications for CIC Analytics.","CIC Analytics Application Setup Roadmap","86273.htm");
Page[10]=new Array("This administration guide is meant for CIC Analytics administrators who manage data displayed in CIC Analytics from any of the following source applications: ","P6 EPPM","Unifier","Primavera Cloud","Oracle Aconex","Setting Up P6 EPPM for Analytics","If you plan to use CIC Analytics for P6 projects, then configure and publish your P6 EPPM projects to bring data into CIC Analytics.","For more details see Construction Intelligence Cloud Analytics P6 EPPM Application Setup Guide.","Setting Up Primavera Unifier for Analytics","If you plan to stage Primavera Unifier data in CIC Analytics then configure analytics settings in Unifier to bring data into CIC Analytics.","For more details, see the Construction Intelligence Cloud Analytics Primavera Unifier Application Setup Guide.","Setting Up Oracle Primavera Cloud for Analytics","No specific settings need to enabled to publish Primavera Cloud data in CIC Analytics.","Setting Up Oracle Aconex for Analytics","Identify and enable project fields in Aconex that are to be made available in CIC Analytics. Only the Enabled project fields will be picked up by the ETL process in CIC Analytics.","Setting Up Source Applications for CIC Analytics","86333.htm");
Page[11]=new Array("Video ","CIC suite refers to the following applications:","CIC Advisor","CIC Analytics","If your organization is provisioned with CIC Advisor as well as CIC Analytics, as an administrator, you can additionally:","create suite administrators and suite users who have  access to both CIC applications","In addition to the standard groups, create new custom groups which are a combination of the standard groups associated with each CIC application","For example, create a new custom group by selecting the Analytics Creator standard group in CIC Analytics and the Advisor Consumer standard group in CIC Advisor.","assign users to custom groups","You can assign access to CIC suite applications to users of any of the following products:","P6 EPPM","Primavera Unifier","Oracle Primavera Cloud","Oracle Aconex","This chapter describes how to create custom groups, associate roles with custom groups and then assign users to custom groups to control their level of access in CIC Advisor and CIC Analytics.","Managing CIC Suite Users","87306.htm");
Page[12]=new Array("When your organization is provisioned with both, CIC Advisor and CIC Analytics, you can assign a user to any of the following standard groups:","Advisor Administrator","Advisor administrators can manage data sources, benchmarking groups, threshold settings, schedule ETLs, and add users and additional administrators to CIC Advisor.","Advisor Consumer","Advisor consumers can only view projects in CIC Advisor corresponding to the data sources that they have been given access to.","Analytics Administrator","Analytics administrators can manage data sources, schedule ETLs, and add users to CIC Analytics. They can also create data visualizations if required.","Analytics Creator","Analytics creators can access and create projects, data sets, and data visualizations in CIC Analytics.","Analytics Consumer","Analytics consumers can only view projects, data sets, and data visualizations in CIC Analytics.","Suite administrator","Suite administrators are super users of CIC applications. They are a combination of Advisor administrator and Analytics administrator, and therefore. can administer both applications.","Note: Assign this role judiciously in your organization.","Suite Consumer","Suite consumers are a combination of Advisor consumer and Analytics consumer. users of this group can only view data visualizations that have been given access to in CIC Analytics, and also view analyses of projects evaluated in CIC Advisor for data sources they access to.","Unassigned (default)","Initially, users are not assigned to any group by default.","About Standard Groups","87311.htm");
Page[13]=new Array("Video","Users in your organization may have varied needs when viewing and accessing data in CIC suite. Assigning all users to any of the standard groups may not be a universal solution. Custom roles give your users the ability to selectively access or view data above and beyond their roles in standard groups. For example, create a custom role for Insights Developers or Project Controls users.","Custom roles can only be created by:","Suite Administrators","Analytics Administrators","This section describes how to add users with custom roles. ","About Custom Roles","88307.htm");
Page[14]=new Array("To add users with custom roles, complete the following tasks:","Create a custom role","Create a custom group which includes the custom role","Assign users to custom groups","When users assigned these groups sign in to CIC Analytics they will be able to see the content shared with this role.","Adding Users With Custom Roles","88312.htm");
Page[15]=new Array("Custom roles can be created by Suite administrators and Analytics Administrators. If your organization is provisioned with CIC Analytics and CIC Advisor, CIC Advisor administrators can only view custom roles.","To add a new custom role:","Use any of the following methods to sign in to the administration application:","In your Welcome email, click on the CIC Analytics administration application URL and sign in as a Suite administrator or CIC Analytics administrator or","Sign in from the Primavera Administration Application portal and click on the Administration application URL.","https://&lt;host&gt;:&lt;port&gt;/p6rdb","In the side bar, click @ User Management, select the Roles tab, and then click Add New Role.","In the Role Name field, enter a unique name for the custom role.","In the Description field, enter a short description about the purpose of the role.","Click Save.","When the custom role is created successfully, the role Status displays Created.","Note: Custom role creation takes approximately 70 minutes, depending on the number of roles queued up for creation.","Proceed to create groups with custom roles.","Creating Custom Roles","88306.htm");
Page[16]=new Array("Video","Custom groups can be created if your organization is provisioned with:","a multi-product platform (MPP) environment with CIC Advisor and CIC Analytics or","CIC Analytics only","Being provisioned with the CIC application suite gives your organization greater flexibility to create custom groups of users with specific permissions based on their needs for accessing any of the CIC applications.","Create a custom group if you want to grant users access to both analytics and advisor applications or if you have created custom roles and want to grant those to users in analytics-only environment. "," ","About Custom Groups","88308.htm");
Page[17]=new Array("To meet the specific needs of your targeted user group, you can create a custom group as a combination of:","one or more standard groups or ","one or more standard groups with a custom role","Custom groups can be created only if your organization is provisioned with CIC Analytics.","Optional Prerequisite: Creating Custom Roles","To create a custom group:","Use any of the following methods to sign in to the administration application:","In your Welcome email, click on the CIC Analytics administration application URL and sign in with administrator credentials or","Sign in from the Primavera Administration Application portal and click on the Administration application URL.","https://&lt;host&gt;:&lt;port&gt;/p6rdb","In the side bar, click @ User Management and then select the Groups and Permissions tab.","The following message displays: Sync in in progress, please wait. Once sync is completed, the following message displays: &lt;n&gt; users synced, <br />where n is the number of users synced.","Click Add new group.","In the Create custom group pane, enter the following information:","In the Group Name field, enter the name of the custom group.","In the Group Description field, briefly explain the purpose of the group.","Select a standard group from the following:","In the Analytics Standard Groups,select at least one standard group. Choices include: ","Analytics Administrator","Analytics Creator","Analytics Consumer","In the Advisor Standard Groups, select at least one standard group. Choices include: ","Advisor Administrator","Advisor Consumer","(Optional) In the Roles field, select any of the custom roles previously created.","Click Save.","The new custom group will now display in the Custom Groups table in the Groups tab.","You can also:","Edit Custom Groups","Delete Custom Groups","Proceed to assign users to the custom group.","Creating Custom Groups","87307.htm");
Page[18]=new Array(" You can modify a custom group by adding or removing custom roles. Standard roles once selected for a custom group cannot be modified.","To edit a custom group:","Sign in to the CIC Administration application.","In the side bar, click @ User Management and then select the Groups tab.","The following message displays: Sync in in progress, please wait. Once sync is completed, the following message displays: &lt;n&gt; users synced, <br />where n is the number of users synced.","In the Groups table, click the Overflow Menu @  for a specific group and then click Edit Group.","Make the necessary changes and click Save.","A confirmation message displays the changes have been saved successfully.","Editing Custom Groups","87346.htm");
Page[19]=new Array(" To delete a custom group:","Sign in to the CIC Administration application.","In the side bar, click @ User Management and then select the Groups tab.","The following message displays: Sync in in progress, please wait. Once sync is completed, the following message displays: &lt;n&gt; users synced, <br />where n is the number of users synced.","In the Custom Groups table, for a specific group, click the Overflow Menu @  and then click Delete Group.","In the Confirm Delete Group dialog box, click OK.","All users belonging to this group will now be designated with an unassigned role.","Deleting Custom Groups","87347.htm");
Page[20]=new Array("After creating custom groups, assign users to custom groups as follows:","In the side bar, click @ User Management.","The following message displays: Sync in in progress, please wait. Once sync is completed, the following message displays: &lt;n&gt; users synced, <br />where n is the number of users synced.","Click the All Users tab to view a list of existing users from the following source applications who have been ported into CIC Advisor and CIC Analytics:","P6","Unifier","Oracle Aconex","Primavera Cloud","(Optional) In the search bar, click @ Filter to view a subset of users of a particular data source and a group. ","Select a Data Source and a Group of users to filter on.","Click Apply.","Note: At least one data source and a custom group must be selected.","In the Group column, select a custom group for each user.","All initially created users belong to an unassigned group by default.","Click Change Group to save the updates made to all users on this page.","Click OK to confirm the changes in the Confirm Group Change dialog box.","To revoke a user's privileges, reset the user's group to Unassigned. Note that this user will still be able to sign in to CIC.","To remove a user from accessing CIC Advisor or CIC Analytics, you will need to change the user's account status. See the Primavera Administration Application Identity Management Administration Guide (https://docs.oracle.com/cd/F33532_01/English/admin/id_mgmt/141597.htm to complete the following tasks:","Reset a user's password","Disable a user account","Enable a user account","Unlock a user account","Assigning Users to Custom Groups","87308.htm");
Page[21]=new Array("When you select @ User Management in the sidebar, users are synched between the  between the CIC administration application and Primavera Cloud portal. Users whose roles cannot be associated with any group in CIC, are classified as Unassigned by default. You will need to manually assign these users to a standard or custom group. ","To assign a group for unmatched users:","In the side bar, click @ User Management.","The following message displays: Sync in in progress, please wait. Once sync is completed, the following message displays: &lt;n&gt; users synced, <br />where n is the number of users synced.","In the Assign Users dialog:","Click Select a group in the Group column, and choose a group from the drop-down list.","Select the check box to confirm your selection.","Repeat the above step for each user.","Click Save to confirm your selections.","Assigning Groups For Unmatched Users","88295.htm");
Page[22]=new Array("When your organization is provisioned with CIC Analytics, as a cloud administrator, you will receive the CIC Analytics Administration Application URL in a Welcome email.","Note: Cloud administrators can only be setup when CIC Analytics is initially provisioned for your organization. Therefore ensure you provide contact details of those individuals you plan to designate as administrators.","As a cloud administrator, you can assign access to CIC Analytics who may be users of any of the following products:","P6 EPPM","Primavera Unifier","Oracle Primavera Cloud","User-level data access for Construction Intelligence Cloud (CIC) is governed by the following criteria: ","User must be granted access to at least one CIC Data Source Cloud Service","For each applicable CIC Data Source Cloud Service granted access, the following applies:","If the user is licensed in the source application, CIC data access matches the source application data access privileges of each user unless further restricted within CIC","If the user is not licensed in the source application, the user has access to all source application data transferred to CIC unless further restricted in CIC","This chapter describes how to add users, assign roles to users to manage their level of access in CIC Analytics, and also create custom roles to support users with specific privileges.","Click here to watch how to manage users in &lt;0P_ProdName_CIC_Analytics_Suite&gt;.","Managing CIC Analytics Users","86294.htm");
Page[23]=new Array("Use this procedure to grant CIC Analytics access to users brought over from the source applications.","Assign any of the following groups to give users access to CIC Analytics:","Analytics Creator: Users can access and create projects, data sets, and data visualizations in CIC Analytics","Analytics Consumer: Users can only view projects, data sets, and data visualizations in CIC Analytics","To enable user access to CIC Analytics:","Use any of the following methods to sign in to the administration application: ","In your Welcome email, click on the CIC Analytics administration application URL and sign in with administrator credentials or","Sign in from the Primavera Administration Application portal and click on the Administration application URL.","https://&lt;host&gt;:&lt;port&gt;/p6rdb","In the side bar, click @ User Management.","The following message displays: Sync in in progress, please wait. Once sync is completed, the following message displays: &lt;n&gt; users synced, <br />where n is the number of users synced.","Click the All Users tab to view a list of existing users from the following source applications who have been ported into CIC Analytics:","P6","Unifier","Primavera Cloud","(Optional) In the search bar, click @ Filter to view a subset of users of a particular data source and a group. ","Select a Data Source and a Group of users to filter on.","Click Apply.","Note: At least one data source and a group must be selected.","Assign each user to a group. Select any of the following groups:","Analytics Creator","Analytics Consumer","Note: All users initially have an unassigned role.","Click Change Group to save the updates made to all users on this page.","Click OK to confirm the changes in the Confirm Group Change dialog box.","To revoke a user's privileges, reset the user's role to Unassigned. Note that this user will still be able to sign in to CIC Analytics.","To remove a user from accessing CIC Analytics, you will need to change the user's account status. See the Primavera Administration Application Identity Management Administration Guide (https://docs.oracle.com/cd/F33532_01/English/admin/id_mgmt/141597.htm to complete the following tasks:","Reset a user's password","Disable a user account","Enable a user account","Unlock a user account","Enabling CIC Analytics User Access","86296.htm");
Page[24]=new Array("Use this procedure if you want to add a new user who has not been ported from any source application. Users of this category will automatically have access to CIC Analytics.","Use any of the following methods to sign in to the administration application:","In your Welcome email, click on the CIC Analytics administration application URL and sign in with administrator credentials or","Sign in from the Primavera Administration Application portal and click on the Administration application URL.","https://&lt;host&gt;:&lt;port&gt;/p6rdb","In the side bar, click @ User Management.","The following message displays: Sync in in progress, please wait. Once sync is completed, the following message displays: &lt;n&gt; users synced, <br />where n is the number of users synced.","Click the All Users tab to view a list of existing users from the following source applications who have been ported into CIC Analytics:","P6","Unifier","Primavera Cloud","In the Search bar, enter or search for a user by their user name or email and click  Search.","If the user does not exist click Create an account to create an identity management account for this new user.","In the Create User pane, enter the following contact information of the user: ","In the Last Name field, enter the last name of the user.","In the First Name field, enter the first name of the user.","In the User ID field, enter the user name that the user will use to sign in to the CIC Analytics application.","In the Email field, enter the user's email ID that is to be associated with their User ID.","In the Mobile field, enter the primary phone number to contact the user.","In the Datasource section, select the corresponding check box to give the user access to all data brought into CIC Analytics from the selected data sources.","Caution: Judiciously assign users of this category in your organization as they will have access to all data from the source applications in CIC Analytics.","Click Create to add the new user.","The user will be assigned the role of an Analytics Consumer by default. To change the user's role, see Enabling CIC Analytics User Access.","Creating CIC Analytics Only Users","86371.htm");
Page[25]=new Array("You can modify a user's privileges by adding or removing their access to one or more data sources.","To manage a user's privileges: ","Use any of the following methods to sign in to the administration application:","In your Welcome email, click on the CIC Analytics administration application URL and sign in with administrator credentials or","Sign in from the Primavera Administration portal and click on the Administration application URL.","https://&lt;host&gt;:&lt;port&gt;/p6rdb","In the side bar, click @ User Management.","Click the All Users tab to view a list of existing users who have been ported into CIC Analytics from various source applications.","In the Actions column, click the Overflow Menu @ and then click Manage Privileges for a user.","In the Manage Privileges dialog, select or deselect datasources as needed. ","Click Update.","Managing User Privileges","88811.htm");
Page[26]=new Array("The CIC administration application supports the following data sources for CIC Analytics:","P6 EPPM","Primavera Unifier","Primavera Cloud","This chapter describes how to configure CIC Analytics for each data source.","Configuring Data Sources","86851.htm");
Page[27]=new Array("Video ","Before scheduling ETL runs for P6 EPPM data, you will need to configure a P6 EPPM data source.","To set up P6 EPPM data source:","Sign in to the CIC Administration application from the Cloud Landing page of the Primavera Administration Application provided in your Welcome email.","http://&lt;host&gt;:&lt;port&gt;/cicadmin","In the Home menu, select a staretl&lt;id&gt; or a &lt;Custom Name of a data source&gt;.","In the sidebar, select @ Config.","Set the following properties for a P6 EPPM data source, and then select Save.","Configuration Property","Description","In the Configurable Properties section, set up the following properties as required:","Custom Name for Datasource","Enter a name for the data source for identification purposes. For example, P6 EPPM Production Data.","Enable Activity Period Actuals","Controls the display of past period actuals for activities.","Select any of the following values:","True (default): Enables pay period actuals for activities.","False: Disables pay period actuals for activities.","ODI LoadPlan Auto Restart","Controls restart of all real-time ODI Load plans.","Select any of the following values:","True (default): Auto restarts ODI load plans for a maximum count of 3 if an initial run fails.","False: Manually restart is required for all real-time ODI load plans.","Enable Resource Assignment Period Actuals","Controls the display of past period actuals for resources.","Select any of the following values:","True (default): Enables pay period actuals for resources.","False: Disables pay period actuals for resources.","Enable Relationship load","Controls the ETL from processing activity relationships.","Select any of the following values:","True (default): ETL runs will not process relationship loads.","False: ETL runs will process relationship loads.","Turn off all History, keep Slowly Changing Dimensions","Controls history tables.","Select any of the following values:","True: Turns off history tables. ","Note: SCDs will continue to be captured at the project level without the history tables.","False (default): Keeps history tables with SCDs.","Note: To delete SCD data for an effective date or a specific date range, contact Oracle Support with a service request. ","Disable Rebuild Index","Controls rebuilding of indexes in the cloud database.","Select any of the following values:","True: Does not rebuild indexes. Results in improved performance.","False (default): Rebuilds indexes.","Turn off Resource and Role Limits","Controls resource and role utilization scripts. ","Select any of the following values:","True: Turn the scripts off. ","False (default): Keeps the scripts running.","Enabled Spread Snapshot History","Controls the use of spread snapshot history in the advanced analytics dashboard.","Select any of the following values:","True: Enables spread snapshot history.","False (default): Disables spread snapshot history.","Use project filter in data source 1","Selects filtered projects only.","Select any of the following values:","True: Ensures the next ETL run includes only projects filtered with the ETLFILTER code = &#8216;&#8217;Y&#8217;.","False (default): Does not use project filters","Include Inactive Resources","Controls resource filtration.","Select any of the following values:","True: Ensures Primavera Data Warehouse tables will not filter out inactive resources.","Note: If inactive resources are included, then spread data and other dimension tables will also be included. You may not need to process this extra resource assignment information.","False (default): Filters out inactive resources.","Enable Slowly Changing Dimensions and Spread History","Slowly changing dimensions (SCDs) are used to capture the change history of dimension fields. If SCD is enabled, any change to the field will add a new row to capture the change in the data warehouse. If SCD is disabled, a new row will not be added if a change is made to that field. This property controls the creation of SCD and spread history. ","Select any of the following values:","True (default): Captures SCD and spread history.","False: Turns off SCD and spread history.","Load all Hierarchy Codes","Builds code hierarchies.","Select any of the following values:","True: Builds code hierarchies with all codes that come from the source.","False (default): Builds hierarchies with codes from configStar. ","ODI Log Level","Controls the level of detail included in the ODI log files.","Select any of the following values:","Summary: Displays a summarized content in the log file.","Detail (default): Displays detailed information in the log file.","Degree of Parallelism for Rebuild Index","If the Disable Rebuild Index property is set to False, then select the number of threads (CPUs) you want to enable to run in parallel to rebuild the index. ","If you plan to use ODI for projects in real-time, set the following properties to poll for changes in project data in P6 EPPM. The minimum poll interval is 5 minutes, and the maximum is 1440 minutes for all poll interval settings listed below:","ODI Realtime Global Loadplan Poll Interval (in minutes)","Enter the frequency at which changes to global data is to be checked in P6 EPPM and captured in the data warehouse.","By default the poll interval is set to 10 minutes. ","ODI Realtime On Demand Loadplan Poll Interval (in minutes)","Checks for changes to projects whose Enable Publication flag is selected in P6 EPPM. This process runs when new projects are added and published to the data warehouse by triggering the ODI On Demand load plan to run for the selected projects and include it in the data warehouse.","Enter the frequency in minutes to check for changes to the Enable Publication flag for projects in P6 EPPM and send it to the data warehouse. By default the poll interval for running the On Demand ODI load plan is set to 60 minutes. ","At each check, new projects with the Enable Publication flag will be added to the data warehouse, and projects whose Enable Publication flag is disabled will be deleted in the data warehouse. ","ODI Realtime Project Loadplan Poll Interval (in minutes)","Checks for changes in current projects in P6 EPPM. This configuration property checks those projects whose Data Warehouse Update Frequency (ODI Only) field is set as Immediate in the Project Preferences dialog box in P6 EPPM.","Enter the frequency in minutes to send changes directly to the data warehouse. By default the poll interval value is set to 1440 minutes (24 hours). ","In the OBIEE Settings section, setup the following properties:","Mail Prefix","Customize the text that will be displayed in the subject line of email notifications that are sent regarding the status of ETL runs.","For example, enter Analytics for status updates on ETL runs in CIC Analytics. ","P6 Base URL","Enter the URL in the following format: http://&lt;host&gt;:&lt;port&gt;/p6","OBIEE Cache Purge","OBIEE cache entries are used to as a method to improve response times of OBIEE dashboards. This property controls the clearance of OBIEE cache entries.","Select any of the following values:","True: Clears OBIEE cache entries.","False (default): Retains the cache entries.","Send Email Notification","Enter the email IDs of the personnel to be notified regarding the status or issues with the STARETL runs. Also select the type of events for which they are to be notified:","Failure: Email notifications are sent only for failed ETL runs.","Success: Email notifications are sent only for successful ETL runs.","Both: Email notifications are sent for successful and failed ETL runs.","Configuration Settings for P6 EPPM Data Source","86852.htm");
Page[28]=new Array("To extract and load P6 EPPM codes: ","Sign in to the CIC Administration application from the Cloud Landing page of the Primavera Administration Application provided in your Welcome email.","http://&lt;host&gt;:&lt;port&gt;/cicadmin","In the Home menu, select a staretl&lt;id&gt; or a &lt;Custom Name of a data source&gt;.","In the left pane, select@ Codes.","To migrate codes for the selected P6 data source, select any of the following tabs:","Project","Activity","Notes:","A maximum of 240 codes is supported for each area (Project, Activity, and Resource).","By default, only those codes that have been enabled through the CIC Administration application are exposed in the subject areas.","To select codes for migration:","From the Available Codes list, select one or more P6 codes.","Select  Move Right.","To deselect codes from being migrated:","From the Enabled Codes list, select one or more P6 codes you want to remove.","Select @ Move Left.","Select Save.","Configuring P6 Codes for Each Data Source","88559.htm");
Page[29]=new Array("To extract and load P6 EPPM user-defined fields (UDFs):","Sign in to the CIC Administration application from the Cloud Landing page of the Primavera Administration Application provided in your Welcome email.","http://&lt;host&gt;:&lt;port&gt;/cicadmin","In the Home menu, select a staretl&lt;id&gt; or a &lt;Custom Name of a data source&gt;.","In the sidebar, select @ Status.","In the All list, select staretl&lt;id&gt; or a P6 &lt;custom name for data source&gt;.","In the left pane, select @ UDFs.","Select any of the following tabs to migrate the following UDFs for the selected data source:","Project","Activity","Resource Assignment","Resource","WBS","Select any of the following tabs to migrate specific UDF types:","Cost","Date","Non-Cost","Number and Integer UDF types are displayed in the 'Non-Cost' folders.","Text","Indicator","Notes: ","Formula-driven UDF values are not brought over during the STARETL process. The calculated UDFs can be selected as columns but  with null values.","A limit of approximately 220 UDFs for each supported level (Project, WBS, Activity, Resource, and Resource Assignment) and data type (Cost limit is 220, Non-Cost limit is 220, and a combination comprising Date, Text, and Integer of 220) is allowed. The limit for Indicator type UDFs for each level is 40. For example, you can select a total of 220 UDFs that includes Project Cost UDFs, WBS Cost UDFs, Activity Cost UDFs.","By default, only those UDFs that have been enabled through the CIC Administration application are exposed in the subject areas.","To select a UDF to be migrated to Primavera Data Warehouse:","In the Available UDFs list, select a UDF from P6 EPPM.","Select  Move Right.","To deselect a UDF from being migrated:","In the Enabled UDFs list, select the UDF from P6 EPPM.","Select @ Move Left.","Select Save","Configuring P6 UDFs for Each Data Source","88558.htm");
Page[30]=new Array("Video ","Before scheduling ETL runs for Unifier data, you will need to configure a Unifier data source. ","To set up Unifier data source:","Sign in to the CIC Administration application from the Cloud Landing page of the Primavera Administration Application provided in your Welcome email.","http://&lt;host&gt;:&lt;port&gt;/cicadmin","In the Home menu, select a staretl&lt;id&gt; or a &lt;Custom Name of a data source&gt;.","Set the following properties for a Unifier data source, and then select Save.",".","Configuration Property","Description","In the Configurable Settings section, setup the following properties:","Custom Name for Datasource  ","Enter a name for the data source for identification purposes. For example, Unifier Production Data.","Disable Rebuild Index ","Controls rebuilding of indexes in the cloud database.","Select any of the following values:","True: Does not rebuild indexes. Results in improved performance.","False (default): Rebuilds indexes. ","Degree of Parallelism for Rebuild Index","If the Disable Rebuild Index property is set to False, then select the number of threads (CPUs) you want to enable to run in parallel to rebuild the index. ","ODI Log Level","Controls the level of detail included in the ODI log files.","Select any of the following values:","Summary: Displays a summarized content in the log file.","Detail (default): Displays detailed information in the log file.","Enable Unifier EVM ","Controls the usage of Unifier Earned Value Management data. ","Select any of the following values:","True: Populates the cloud database with EVM data.","False (default): Does not populate the cloud database with EVM data. Results in improved performance.","Store Unifier History","Controls Unifier history tables.","Select any of the following values:","True (default): Keeps the history tables running.","False: Disables all history tables.","If Store Unifier History is set to True, you can set the history levels for the following:","Use P6 project Name for Unifier Project","Controls the source that will be used for naming a Unifier project.","Select any of the following values:","True (default): If the Unifierproject ID is identical in P6 and Unifier, then the project name from P6 will be used for the Unifier project.","False: Uses the project name from Unifier.","Unifier BP Data History Level ","Controls BP data history level.","Select the frequency of BP history tables as Week (default) or Month to capture the history of BP dimensions. ","Unifier Level Data History Level ","Controls level history (Facility and Asset Management, FAM).","Select the frequency of data history tables as Week or Month (default).","Unifier Cash Flow and Cost Sheet Data History Level","Controls the cash flow history and cost sheet history tables.","Select the frequency of history tables as Week (default) or Month.","Unifier Space Data History Level","Controls space history tables. Set this value to Month (default). ","Enable Unifier Slowly Changing Dimensions ","Controls the capability to see how business process has changed over time. A business process history can then be generated weekly or monthly. When you select Refresh All, it overwrites all previous history and only the latest history data is made available. Use this setting for Project / Shell, BP and BP Line Items and BP UDFs to generate reports based on historical data.","Select any of the following values:","True (default): Captures history for all projects and business processes. This includes non-dynamic Business process related dimensional data, and dynamic dimensional data for Business process (UDFs) metadata.","False: Disables business process history.","Unifier Project Shell History Level  ","Controls project shell history levels. Select the frequency of BP history tables as Week (default) or Month. ","In the OBIEE Settings section, setup the following properties:","Mail Prefix","Customize the text that will be displayed in the subject line of email notifications that are sent regarding the status of ETL runs.","For example, enter Analytics for status updates on ETL runs in CIC Analytics. ","Unifier Base URL","Enter the URL in the following format: http://&lt;host&gt;:&lt;port&gt;/unifier ","OBIEE Cache Purge","OBIEE cache entries are used to as a method to improve response times of OBIEE dashboards. This property controls the clearance of OBIEE cache entries.","Select any of the following values:","True: Clears OBIEE cache entries.","False (default): Retains the cache entries.","Send Email Notification On","Enter the email IDs of the personnel to be notified regarding the status or issues with the STARETL runs. Also select the type of events for which they are to be notified:","Failure: Email notifications are sent only for failed ETL runs.","Success: Email notifications are sent only for successful ETL runs.","Both: Email notifications are sent for successful and failed ETL runs.","Configuration Settings for Unifier Data Source","86854.htm");
Page[31]=new Array("Video ","CIC can be configured to display projects from multiple Primavera Cloud data sources. ","To configure the properties for a Primavera Cloud data source:","Sign in to the CIC Administration application from the Cloud Landing page of the Primavera Administration Application provided in your Welcome email.","http://&lt;host&gt;:&lt;port&gt;/cicadmin","In the Home menu, select a staretl&lt;id&gt; or a &lt;Custom Name of a data source&gt;.","Note: &lt;id&gt; is the identifier of the data source.","Click @ Config in the sidebar for a selected Primavera Cloud data source.","In the Configurable Properties section, set the following properties, and then click Save.","Configuration Property","Description","Custom Name for Datasource","Enter a name for the data source for identification purposes. For example, Primavera Cloud Production Data.","ODI Log Level","Controls the level of detail included in the ODI log files.","Select any of the following values:","Summary: Displays a summarized content in the log file.","Detail (default): Displays detailed information in the log file.","Spread Page Size","Enter the maximum number of assignments to be calculated for spread data. It controls the data volume the server handles in one request batch. ","Primavera Cloud URL","This URL is preset for your organization and is used for detailed analysis.","Enable Loading Primavera Cloud Codes","Controls the ability to load codes. ","Select any of the following values:","True: Loads codes.","False (default): Does not load codes.","Enable Loading Primavera Cloud UDFs","Controls the ability to load user defined fields (UDFs. ","Select any of the following values:","True: Loads codes.","False (default): Does not load codes.","In the OBIEE Settings section set up the following properties:","Mail Prefix","Customize the text that will be displayed in the subject line of email notifications that are sent regarding the status of ETL runs. For example, enter Analytics for status updates on ETL runs.","Primavera CIC Host URL","The Primavera CIC Host URL is preset for your organization and is used for analysis.","Lobby URL","The Lobby URL is preset for your organization and is used to switch between applications accessible through the Smart Construction Platform. ","OBIEE Cache Purge","OBIEE cache entries are used to as a method to improve response times of OBIEE dashboards. This property controls the clearance of OBIEE cache entries.","Select any of the following values:","True: Clears OBIEE cache entries.","False (default): Retains the cache entries.","Send Email Notification","Enter the email IDs of the personnel to be notified regarding the status or issues with the STARETL runs. Also select the type of events for which they are to be notified:","Failure: Email notifications are sent only for failed ETL runs.","Success: Email notifications are sent only for successful ETL runs.","Both: Email notifications are sent for successful and failed ETL runs.","Configuring Primavera Cloud Data Sources","86267.htm");
Page[32]=new Array("To extract and load Primavera Cloud codes: ","Sign in to the CIC Administration application from the Cloud Landing page of the Primavera Administration Application provided in your Welcome email.","http://&lt;host&gt;:&lt;port&gt;/cicadmin","In the Home menu, select a staretl&lt;id&gt; or a &lt;Custom Name of a data source&gt;.","In the left pane, select @ Codes.","To migrate codes for a selected data source, select any of the following tabs:","Project","Activity","Notes:","A maximum of 300 codes is supported for each area (Project, Activity).","By default, only those codes that have been enabled in the CIC Administration application are exposed in the subject areas.","To select a code for migration:","From the Available Codes list, select a Primavera Cloud code you want to enable.","Select  Move Right.","To deselect a code from being migrated:","From the Enabled Codes list, select a Primavera Cloud code you want to remove.","Select @ Move Left.","Select Save.","Configuring Primavera Cloud Codes for Each Data Source","88555.htm");
Page[33]=new Array("To extract and load Primavera Cloud user-defined fields (UDFs): ","Sign in to the CIC Administration application from the Cloud Landing page of the Primavera Administration Application provided in your Welcome email.","http://&lt;host&gt;:&lt;port&gt;/cicadmin","In the Home menu, select a staretl&lt;id&gt; or a &lt;Custom Name of a data source&gt;.","In the left pane, select @ UDFs.","Select any of the following tabs to migrate the corresponding UDFs or the selected data source:","Activity","Project","Select any of the following sub-tabs to migrate a UDF type:","Cost","Date","Non-Cost: Number and Integer UDF types are displayed in the 'Non-Cost' folders.","Text","Notes:","A maximum of 200 UDFs are supported for each area (Project, Activity) and data type. ","By default, CIC those UDFs that have been enabled in the CIC Administration application are exposed in the subject areas.","To select a UDF to be migrated","In the Available UDFs list, select a Primavera Cloud UDF you want to enable.","Select  Move Right.","To deselect a UDF from being migrated","In the Enabled UDFs list, select the UDF you want to remove.","Select @ Move Left.","Select Save Changes.","Configuring Primavera Cloud UDFs for Each Data Source","88556.htm");
Page[34]=new Array("Video ","CIC can be configured to display projects from multiple Aconex data sources. ","To configure the properties for an Aconex data source:","Sign in to the CIC Administration application provided in your Welcome email.","http://&lt;host&gt;:&lt;port&gt;/cicadmin","From the @ Home menu, select an Aconex data source. For example, select Staretl10 or Aconex_Staging.","Click @ Config in the sidebar for a selected Aconex data source.","Set the following properties, and then click Save.","Configuration Property","Description","Custom Name for Datasource","Enter a name for the data source for identification purposes. For example Aconex Production Data.","Aconex URL","This URL is preset for your organization and is used for detailed analysis. ","Degree of Parallelism for Rebuild Index","If the Disable Rebuild Index property is set to False, then select the number of threads (CPUs) you want to enable to run in parallel to rebuild the index. ","In the OBIEE Settings section set up the following properties:","Mail Prefix","Customize the text that will be displayed in the subject line of email notifications that are sent regarding the status of ETL runs.","For example, STAR ETL email notifications for Aconex can be prefixed as  CIC for Aconex ETL.","Aconex CIC Host URL","The Aconex URL is preset for your organization and is used for analysis.","Lobby URL","The Lobby URL is preset for your organization and is used to switch between applications accessible through the Smart Construction Platform. ","OBIEE Cache Purge","OBIEE cache entries are used to as a method to improve response times of OBIEE dashboards. This property controls the clearance of OBIEE cache entries.","Select any of the following values:","True: Clears OBIEE cache entries.","False (default): Retains the cache entries.","Send Email Notification","Enter the email IDs of the personnel to be notified regarding the status or issues with the STARETL runs. Also select the type of events for which they are to be notified:","Failure: Email notifications are sent only for failed ETL runs.","Success: Email notifications are sent only for successful ETL runs.","Both: Email notifications are sent for successful and failed ETL runs.","Configuration Settings for Aconex Data Source","88907.htm");
Page[35]=new Array("After the initial ETL run is complete and Aconex data is available in CIC Analytics, a master list of all enabled project fields in Aconex is displayed in the CIC Analytics administration application. You will need to select a subset of this master list that are to be made available for creating Aconex data visualizations and dashboards in CIC Analytics.","To select a subset of project fields from Aconex that are to be made available in CIC Analytics for data visualizations:","Sign in to the CIC Administration application.","http://&lt;host&gt;:&lt;port&gt;/cicadmin","From the @ Home menu, select a data source. For example, select Staretl10 or Aconex_Staging.","Note: &lt;id&gt; is the identifier of the data source.","In the sidebar, click @ Project Fields.","From the master list of project fields in the Available Project Fields page, select the check box of a required project field to make it available in CIC Analytics, and click Next.","Note: The master list contains only those project fields that have an Enabled status, and are linked with Mails/Docs in Aconex in-app. Disabled project fields or those that are not linked with Mails/Docs are not included in this master list.","A maximum of 50 project fields (common + non-common) of the following data types can be selected in the common and non-common folders:","Textual (includes Text, Text Area, Select List Single, Select List Multiple, and Yes/No)","Numerical (includes Length, Time, %, Area, Currency, and Temperature)","Date","For example, select 20 common textual project fields, and 30 non-common textual project fields for CIC Analytics.","In the Selected Project Fields page, validate your selection. You can also manually re-categorize common project fields as non-common (if required) by de-selecting the check box in the Common column.","To undo a manually marked project field, go back to the Available Project Fields page, deselect that project field, and click Next. It will be removed from the Non common list. ","To include the project field again, go to the Available Project Fields page, select that project field, and click Next. It will start appearing in the Common list again.","Common project fields are fields that have the same label and type, and are used in multiple Aconex projects.","Non-common project fields are limited to a specific project.","Click Save to confirm the changes.","Run the ETL to make these project fields available in the RPD for data visualizations and dashboards.","Selecting Aconex Project Fields for CIC Analytics","88908.htm");
Page[36]=new Array("To bring data from a source application into CIC Analytics, you need to run or schedule ETLs and ODI load plans (if applicable to your data source) from the Status page of the CIC Administration application.","To select a data source, from the @ Home menu, select a STARETL or a &lt;Custom Name for DataSource&gt; such as productionP6, or productionaconex as shown below.","The following source applications are currently supported:","P6 EPPM","Unifier","Oracle Primavera Cloud","Oracle Aconex ","This chapter describes the standard administration tasks that you will perform to manage the source data displayed in CIC Analytics.","Standard Administration Tasks","86346.htm");
Page[37]=new Array("The CIC Administration application contains a staretl section for each data source.","To run the STARETL process: ","Select a data source.","Sign in to the CIC Administration application.","http://&lt;host&gt;:&lt;port&gt;/cicadmin","From the@ Home  menu, select a staretl&lt;id&gt; or a &lt;Custom Name for DataSource&gt;.","Note: &lt;id&gt; is the identifier of the data source.","In the sidebar, click @ Status.","Click Actions and select Run ETL to run the STARETL process immediately.","Running the STARETL Process","86347.htm");
Page[38]=new Array("To stop the STARETL process run for a data source:","Select a data source.","Sign in to the CIC Administration application.","http://&lt;host&gt;:&lt;port&gt;/cicadmin","From the@ Home  menu, select a staretl&lt;id&gt; or a &lt;Custom Name for DataSource&gt;.","Note: &lt;id&gt; is the identifier of the data source.","In the sidebar, click @ Status.","Click Stop for a currently running STARETL process.","Stopping the STARETL Process","86349.htm");
Page[39]=new Array("The option to run an initial load is displayed only for the first time a data source is made available in CIC. If an initial load run fails, this option will be available until the initial load is successfully completed.","Notes: When an initial load is in process:","You cannot run an initial load of another data source simultaneously.","You cannot run an ETL process for another data source when an initial load run is in process. The ETL process will be in queue for a run. ","To run an initial load for a new data source:","Select a data source","Sign in to the CIC Administration application.","http://&lt;host&gt;:&lt;port&gt;/cicadmin","From the@ Home  menu, select a staretl&lt;id&gt; or a &lt;Custom Name for DataSource&gt;.","Note: &lt;id&gt; is the identifier of the data source.","In the sidebar, click @ Status.","Click Run Initial Load.","Upon successful completion, proceed to run an ETL. See Running the STARETL Process.","Running Initial Loads","88814.htm");
Page[40]=new Array("To schedule a STARETL process run for a data source:","Select a data source","Sign in to the CIC Administration application.","http://&lt;host&gt;:&lt;port&gt;/cicadmin","From the@ Home  menu, select a staretl&lt;id&gt; or a &lt;Custom Name for DataSource&gt;.","Note: &lt;id&gt; is the identifier of the data source.","In the sidebar, click @ Status.","Click Actions and select Schedule ETL.","In the Schedule Frequency field, select the frequency for the STARETL process run as Daily, Weekly or None.","If you select Daily:","In the Run ETL at field, enter the start time for the daily ETL run and click Save.","To schedule multiple ETL runs daily, click Add and enter a date and time for each ETL run.","Note: Schedule multiple ETLs daily at least two hours apart.","If you select Weekly:","In the Run ETL at field, enter the time for the process run.","Select the days for running the STARETL process, and click Save.","If you select None, no STARETL process run will be scheduled for a data source.","Scheduling STARETL Runs","86350.htm");
Page[41]=new Array("To schedule automatic restart of load plans:","Select a data source","Sign in to the CIC Administration application.","http://&lt;host&gt;:&lt;port&gt;/cicadmin","From the@ Home  menu, select a staretl&lt;id&gt; or a &lt;Custom Name for DataSource&gt;.","Note: &lt;id&gt; is the identifier of the data source.","In the sidebar, click @ Status.","Click Actions and select Schedule Auto Restart.","From the Auto Restart On list, select the week day to restart the load plan. Initially, the Auto Restart is set to None by default.","In the At field, scroll and schedule the restart time.","Click Save.","Click OK to close the success message, Restart Load Plans Scheduled Successfully.","Click Close.","Schedule Auto Restart of Load Plans","86392.htm");
Page[42]=new Array("To view a list of recently run STARETL processes across all data sources, and access their respective log files:","Sign in to CIC Administration application.","http://&lt;host&gt;:&lt;port&gt;/cicadmin","In the sidebar, click @ Status.","On the Global Status page, the following information displays each STARETL process:","Custom Name: The custom name given to a data source. ","ETL Name: The identifier for the data source for the STARETL process.","ETL ID: The unique identifier for the STARETL process run.","ETL Start Date: The start date and time for the STARETL process run based on the server time.","ETL End Date: The end date and time for the STARETL process run based on the server time.","Status: The status of the STARETL process run. These include:","OK: The STARETL process completed successfully.","Running: The STARETL process is currently running.","Stopped: The STARETL process has been manually intervened to stop","Failed: The STARETL process has failed. View the report and log for more information about the failure.","Log: Click View Log to access details of the STARETL run.","Note: Alternatively, to view the log file from the Status page of a specific staretl process run, from the @ Home , menu select a staretl and, and then click @ Status.","Reviewing Log Files of STARETL Runs","86351.htm");
Page[43]=new Array("P6 projects can be set up for:","Burn Down calculations","Work Planning calculations or","Graded approach for schedule adherence","Ensure specific project settings are enabled in P6 EPPM if you plan to have any of the above metrics calculated in CIC Analytics. For more details on how to enable the project settings, see the Construction Intelligence Cloud Analytics P6 EPPM Application Setup Guide.","Additional P6 EPPM Procedures","86600.htm");
Page[44]=new Array("Burn down is a set of calculations that display how a project will progress if everything goes according to plan. CIC Analytics contains an additional way that data can be analyzed outside of the standard P6 EPPM methods.","CIC Analytics includes metrics and key performance indicators (KPIs) for both the current project data, as well as any point in the past for which the data was captured. These metrics and KPIs include both current and historical activity counts, units, and costs. CIC Analytics has the ability to track and monitor how the current schedule is executing in relationship to how it was supposed to progress at the start of the project (T0). This includes, but is not limited to, any new activities that were added to the current project that did not exist at the start of the project (emergent), activities that have been removed in the current schedule that existed in the point in time capture of the project (deleted), and activities whose start or finish has changed since the point in time capture of the project. ","Notes: Oracle provides several white papers that detail aspects of Burn Down:","Burn Down Detail Data Flow: http://www.oracle.com/webfolder/technetwork/tutorials/primavera/OnlineLearning/WhitePapers/BurnDown_Details_DataFlow.pdf","Burn Down Units Details: http://www.oracle.com/webfolder/technetwork/tutorials/primavera/OnlineLearning/WhitePapers/BurnDown_Details_Units.pdf","Burn Down Counts Details: http://www.oracle.com/webfolder/technetwork/tutorials/primavera/OnlineLearning/WhitePapers/BurnDown_Details_Counts.pdf","Supporting P6 Projects with Burn Down Calculations","86601.htm");
Page[45]=new Array("A project can have activities scheduled and completed before a burn down begins. This gives users the flexibility to begin the project burn down on the date specified in the sys_workdown_date UDF rather than the Project Start Date.","In a Burn Down project, the initial snapshot of the project's activities and assignments is taken the day before the date entered in the sys_workdown_date UDF. This snapshot is used as a baseline to compare against actual values. For example, the Baseline Remaining Units Burned can be compared to the Remaining Units Burned. The STARETL process must be run one day before the sys_workdown_date (or the Project Start Date if this UDF is not used) to capture this initial snapshot.","Scheduling a Burn Down Project","86548.htm");
Page[46]=new Array("When using Burn Down metrics, you must update the schedule and run the STARETL process. Each daily STARETL process updates two sets of daily metrics:","Metrics for &#8216;Today&#8217;: All work completed today through the latest schedule update and data date change is recorded as work completed for the current date when the STARETL process occurs.","Metrics for &#8216;Yesterday&#8217;: Since the data from yesterday is only current through the latest schedule update and data date change, any additional work completed yesterday but AFTER the update is now added to the daily metrics for &#8216;yesterday&#8217;. ","For example, a project is updated at 6pm daily and then the STARETL process is run. The next day, these become metrics for &#8216;yesterday&#8217; and initially reflect work only through 6pm yesterday. When the STARETL process is run today, any additional work completed between 6pm and midnight is now included under the metrics for &#8216;yesterday&#8217;.","STARETL Runs for Burn Down Metrics","86549.htm");
Page[47]=new Array("To capture daily trending information, complete the following steps each day to calculate the metrics in the Burn Down subject area:","Update the status of activities in the projects you configured in P6 to be included in the Burn Down subject area. For example, update the Actual and Remaining Units and which activities are completed.","Adjust the data date to correspond to the latest status update.","Run the STARETL process.","Note: The STARETL run must occur within each calendar date to properly capture daily metrics.","Calculating Metrics in Burn Down Subject Area","86550.htm");
Page[48]=new Array("Work Planning is a method of tracking how work is progressing based on a set of user-determined points in time. CIC Analytics supports Work Planning for P6 EPPM data.","Supporting P6 Projects with Work Planning Calculations","86602.htm");
Page[49]=new Array("Scope freeze, schedule freeze, and actual metrics are captured for each week of planned work in a project that has been opted into the Work Planning subject area. Each individual week in the schedule will have these metrics captured leading up to that week&#8217;s execution, allowing users to monitor their planning performance on a weekly basis for an upcoming week of work.","The sys_scope_freeze and sys_schedule_freeze UDFs control the amount of history or the number of weeks these metrics capture for each individual week leading up to the execution week.","The diagram below illustrates how the ETL process would capture Work Planning metrics for the week 12/17/2012 to 12/23/2012 given the following P6 settings:","The sys_scope_freeze equals T-2w","The sys_schedule_freeze equals T-1w","The Starting Day of Week equals Monday (this is set in the P6 Application Settings)","In this scenario, the Scope Freeze for the week starting on Monday 12/17/2012 occurs two weeks prior (T-2w) to that week&#8217;s planned start date. Schedule Freeze occurs one week prior (T-1w) to that week&#8217;s planned start date. Daily Actual Start and Finish metrics are captured throughout the week.","Once the STARETL process has run on these respective freeze dates, any changes in the schedule for an upcoming week (such as adds, deletes, or planned date changes) are recorded the next time the STARETL process runs.","Scheduling a Work Planning Project","82100.htm");
Page[50]=new Array("Graded approach to schedule adherence is a method for tracking adherence using four distinct levels of work scheduling (A, B, C, and D). ","The levels of work scheduling are:","A (Hourly): Used when you require the most control, adherence, and management oversight. Reasons include risk (probability safety analysis/risk assessment), personnel safety, or other significant concerns. Users must finish Level A activities within one hour of the target planned finish date.","B (Daily): Used for work requiring multi-discipline coordination, significant tagouts, or risk significant work. Users must finish Level B activities on the same day as the target planned finish date.","C (Weekly): Used for non-risk significant and routine work that does not require support from other work groups. Users must finish Level C activities within the week of the target planned finish date.","D (No Tracking): Used for housekeeping, shop work, and other types of work that have no impact to the plant. Level D activities are considered &#8220;fill-in&quot; work and are not tracked for schedule adherence.","For graded schedule adherence, ensure history exists for the project as of the scheduled freeze date and T-0 baseline date for the week the STARETL process will run.","During T-0 for a given week when you run the STARETL process, the Baseline Planned Finish Date (as of T-0) and the Schedule Freeze Planned Finish Date (as of schedule freeze UDF) for the activities will be captured. You can use these dates along with the assigned adherence grade to calculate the graded schedule adherence in CIC Analytics.","Using Graded Approach for Schedule Adherence","82199.htm");
Page[51]=new Array("This chapter describes how to manage personal information (PI) in Construction Intelligence Cloud Analytics.","Managing Personal Information","86785.htm");
Page[52]=new Array("Consent notices inform users how personal information (PI) is collected, processed, stored, and transmitted, along with details related to applicable regulations and policies. Consent notices also alert users that the action they are taking may risk exposing PI. Oracle Construction and Engineering products help you to ensure that you have requested the appropriate consent to collect, process, store, and transmit the PI your organization holds as part of any source application (P6 EPPM) that can be configured with CIC Analytics.","About Consent Notices","86786.htm");
Page[53]=new Array("Personal information (PI) is any piece of data which can be used on its own or with other information to identify, contact or locate an individual or identify an individual in context. This information is not limited to a person's name, address, and contact details. For example, a person's IP address, phone IMEI number, gender, and location at a particular time could all be personal information. Depending on local data protection laws, organizations may be responsible for ensuring the privacy of PI wherever it is stored, including in back-ups, locally stored downloads, and data stored in development environments.","As part of your CIC Analytics Cloud Service, you may be using Oracle Identity Cloud Service (&#8220;Oracle IDCS&#8221;) to manage your user access and entitlements across a number of cloud and on-premises applications and services. If you are using or accessing Oracle IDCS, you are responsible for deleting your details and data from the Oracle IDCS environment. You are responsible for retrieving your content in Oracle IDCS during your applicable services period.","About Personal Information","86787.htm");
Page[54]=new Array("CIC Analytics consumes data from source applications and makes it available to CIC Analytics users. End-users must give their consent in the source application to read and agree to the consent message to ensure they:","have access to the data in CIC Analytics","understand the responsibilities with regard to data protection and security","P6 EPPM and Unifier source applications can be configured with CIC Analytics. For detailed instructions on how to configure consent notices in either application, refer to the P6 EPPM Application Administration Guide and the Primavera Unifier General Administration Guide respectively.","Configuring Consent Notices for CIC Analytics","86788.htm");
Page[55]=new Array("Information security and privacy laws can carry heavy penalties and fines for organizations which do not adequately protect PI they gather and store. Data visible to a CIC Analytics user depends on the consent notices configured and accepted by users in the source applications which can be configured with CIC Analytics.","If these laws apply to your organization, it is your responsibility to ensure consent notices are configured in the source applications before they are required.","Your Responsibilities","86789.htm");
Page[56]=new Array("Personal information (PI) in CIC Analytics depends on the changes made in source applications such as P6 EPPM. When PI data is modified or deleted in the source applications, run the ETL process to ensure it is automatically reflected in CIC Analytics. If a user is deleted in a source application, they can no longer access CIC Analytics. ","Ensuring Privacy of Data Collection","86790.htm");
Page[57]=new Array("Products provide granular access controls, by record, data element, type of data, or logs. Ensure CIC Analytics adheres to the same user privileges and access rights as any of the source applications supported by CIC Analytics.","Limiting Granular Access to Data","86791.htm");
Page[58]=new Array("Data masking is the ability to display only a portion of a data field or prevent viewing data. Oracle database security policies can hide access to certain columns. Ensure you review this feature for CIC Analytics.","Ensuring Data Masking is Supported","86792.htm");
Page[59]=new Array("An IP white list is a list of trusted IP addresses from which your users can access domains. CIC Analytics uses Oracle Analytics Server for displaying analyses and data visualizations. For more details on IP white-listing, refer to OAS documentation.","Ensuring IP White-listing","86793.htm");
Page[60]=new Array("CIC Analytics has control over some sensitive fields. Control can be regulated to only users that are allowed to login. Data access is generally project level and either cost or no cost, and granularity is provided for those differences. Global data is also visible but honors same security as source applications.","Controlling Access to Special Categories of Data","86794.htm");
var PageCount=61;


/*
Date: 12/23/2024 1:30 PM
Source: analytics_25_dev
BookID: 86260
PubProduct: CIC_ANALYTICS
BookTitle: Administration Guide
Version: Version 25
Lang:	en
*/
