Skip Headers
StorageTek SL150 Modular Tape Library Installation Manual
E28647-05
Library
Index
Next
Contents
Title and Copyright Information
Preface
Access to Oracle Support
What's New
1
Product Overview
Configuration Overview
Library System Indicators
Human Interfaces
Installation Wizard Keyboard Screens
Specifications
Installation Overview
2
Planning and Preparation
Rack Preparation
Tape Device Driver
Environmental Information
To Stage the SL150 Library
To Unpack and Acclimate the SL150 Library
3
Hardware Installation
Overview
Base Module Installation
Gather the Rail Parts
Base Module Mounting Rail
Back Rail
Tool Requirement
To Install the Base Module Back Rails
Front Rail
Tool Requirement
To Install the Front Rail
Clip Nut Location
To Install the Clip Nut
Mount the Base Module
To Insert the Base Module
Expansion Module Installation
Tool Requirement
To Unpack and Acclimate the Expansion Module
Expansion Module Attachment Kit
Gather the Attachment Hardware
To Power Down the Library
To Remove the Library Floor
To Install Clip Nuts for the Expansion Module
To Prepare the Expansion Module for Installation
To Install the Expansion Module
To Secure the Expansion Module
To Replace the Cartridge Magazines
To Label the Module
To Install the Hook and Loop Strap
Final Hardware Actions
To Release the Robot Lock
To Perform Basic Cabling
To Apply Power
4
Library Initialization
Initialization Overview
To Start Library Initialization
To Log in as the Default Administrator
Step 1 of 4 (Change the Default Administrator Password)
To Change the Default Password
Step 2 of 4 (Set the Library Date and Time)
To Set the Date
To Set the Time
Step 3 of 4 (Configure Network Port 1)
To Configure the Network with a Static IP Address
To Configure the Network Using DHCP
Step 4 of 4 (Review and Apply Initialization Settings)
To Apply Changes
To Verify Network Settings
Final Configuration
To Reset the Library with Manufacturing Default Values
5
Checkout
Self-Test Overview
To Set the Library Offline
To Run the Self-Test
Incomplete Test
6
Adding Power Supplies and Tape Drives
Power Supply
To Remove the Power Supply Filler
To Install an Additional Power Supply
Tape Drive Tray
To Remove the Tape Drive Filler
To Install an Additional Tape Drive Tray
7
Relocation
A
Startup
B
Drive Firmware
Determine the Current Drive Firmware Version
Download Firmware from MyOracleSupport
C
Controlling Contaminants
Environmental Contaminants
Required Air Quality Levels
Contaminant Properties and Sources
Operator Activity
Hardware Movement
Outside Air
Stored Items
Outside Influences
Cleaning Activity
Contaminant Effects
Physical Interference
Corrosive Failure
Shorts
Thermal Failure
Room Conditions
Exposure Points
Filtration
Positive Pressurization and Ventilation
Cleaning Procedures and Equipment
Daily Tasks
Weekly Tasks
Quarterly Tasks
Biennial Tasks
Activity and Processes
D
Robot Locking for Reshipment
Glossary
Index
