| StorageTek SL150 Modular Tape Library Systems Assurance Guide 22579-04 |
|
![]() Previous |
![]() Next |
This chapter provides the following information:
When ordering a new SL150, use the following part numbers:
7101750: base module, 30 slots with one HP LTO-5 half-height FC tape drive
7101760: base module, 30 slots with one HP LTO-5 half-height SAS tape drive
7104475: base module, 30 slots with one HP LTO6- half-height FC tape drive
7104476: base module, 30 slots with one HP LTO-6 half-height SAS tape drive
7101763: SL150 expansion module, 30 slots (contains neither a tape drive assembly nor a power supply)
7101761: SL150 drive, HP LTO-5, half-height SAS
7104474: SL150 drive, HP LTO-6, half-height SAS
7101762: SL150 drive, HP LTO-5, half-height FC
7104473: SL150 drive, HP LTO-6, half-height FC
For upgrades and other options to existing systems, use the following part numbers:
7101770: SL150 expansion module, 30 slots (contains neither a tape drive assembly nor a power supply)
7101772: SL150 drive, HP LTO-5, half-height SAS
7104450: SL150 drive, HP LTO-6, half-height SAS
7101773: SL150 drive, HP LTO-5, half-height FC
7104449: SL150 drive, HP LTO-6, half-height FC
7101771: SL150 power supply
A few examples are provided to show the use of both new library part numbers and upgrade part numbers.
Example 1:
30 cartridge library with an FC drive, a second FC drive, and a second power supply (redundant power):
7101750: SL150 library, 30 slots with HP LTO-5 half-height FC tape drive
7101762: SL150 drive, HP LTO-5, half-height FC
7101769: SL150 power supply
Example 2:
60 cartridge, partitioned library with a total of four drives (2 SAS and 2 FC) and four power supplies:
7101760: SL150 library, 30 slots with one HP LTO-5 half-height SAS tape drive
7101763: SL150 expansion module, 30 slots (contains neither a tape drive assembly nor a power supply)
7101761: SL150 drive, HP LTO-5, half-height SAS
7101762: SL150 drive, HP LTO-5, half-height FC
7101762: SL150 drive, HP LTO-5, half-height FC
7101769: SL150 power supply (x3)
|
Note: For this example, partition 1 has SAS drives while partition 2 has FC drives. However, the SL150 library does support mixed drives without partitioning. |
Example 3:
90 cartridge library with one FC drive
7101750: SL150 library, 30 slots with one HP LTO-5 half-height FC tape drive
7101763: SL150 expansion module, 30 slots [contains neither a tape drive assembly nor a power supply] (x2)
Example 4:
Upgrade an existing non-partitioned library from 30 to 120 cartridges with a SAS drive in each module (power is not redundant):
7101770: SL150 expansion module, 30 slots [contains neither a tape drive assembly nor a power supply)] (x3)
7101772: SL150 drive, HP LTO-5, half-height SAS (x3)
7101771: SL150 power supply (x3)
This section provides part numbers for:
The library uses Ethernet cables for network connections. Always use shielded Ethernet cables to connect to a drive installed in a library.
The following Ethernet cable part numbers can be ordered with the initial order or as upgrades.
CABLE10187033-Z-A: CAT5E, 8 feet, shielded
CABLE10187034-Z-A: CAT5E, 35 feet, shielded
CABLE10187035-Z-A: CAT5E, 50 inches, shielded
CABLE10187037-Z-A: CAT5E, 55 feet, shielded
The following multimode (50-micron) fiber-optic cables connect Fibre Channel devices. These cables are orange with tan LC connectors. The tape drive only supports LC connectors.
The following fiber-optic cable part numbers can be ordered with the initial order or as upgrades.
Riser cable materials are not classified according to flammability.
CABLE10800307-Z-A
LC-LC, 50/125/ duplex, riser, 1 meter
CABLE10800308-Z-A
LC-LC, 50/125/ duplex, riser, 2 meter
CABLE10800310-Z-A
LC-LC, 50/125/ duplex, riser, 10 meter
CABLE10800311-Z-A
LC-LC, 50/125/ duplex, riser, 50 meter
CABLE10800312-Z-A
LC-LC, 50/125/ duplex, riser, 100 meter
CABLE10800340-Z-A
LC-LC, 50/125/ duplex, riser, 3 meter
CABLE10800341-Z-A
LC-LC, 50/125/ duplex, riser, 5 meter
Plenum cables meet UL standards for flammability.
CABLE10800313-Z-A
LC-LC, 50/125/ duplex, plenum, 10 meter
CABLE10800314-Z-A
LC-LC, 50/125/ duplex, plenum, 50 meter
CABLE10800315-Z-A
LC-LC, 50/125/ duplex, plenum, 100 meter
PWRCORD10083243-A
Power Cord: Japan, 2.5 meters, METI plug, IEC60320-1-C13 connector, 15 A (for factory installation)
PWRCORD10083244-A
Power Cord: Australia, 2.5 meters, SA3112 plug, IEC60320-1-C13 connector, 10 A (for factory installation)
PWRCORD10083245-A
Power Cord: Italy, 2.5 meters, CEI23 plug, IEC60320-1-C13 connector, 10 A (for factory installation)
PWRCORD10083246-A
Power Cord: Switzerland, 2.5 meters, SEV1011 plug, 10A, IEC60320-1-C13 connector, 10 A (for factory installation)
PWRCORD10083247-A
Power Cord: United Kingdom, 2.5 meters, BS1363A plug, 10A, IEC60320-1-C13 connector, 10 A (for factory installation)
PWRCORD10083248-A
Power Cord: Denmark, 2.5 meters, DEMKO107 plug, IEC60320-1-C13 connector, 10 A (for factory installation)
PWRCORD10083636-A
Power Cord: South Africa, 2.5 meters, BS546 plug, IEC60320-1-C13 connector, 16 A (for factory installation)
PWRCORD10187018-A
Power Cord: Europe, 2.5 meters, CEE 7/VII plug, IEC60320-1-C13 connector, 10 A (for factory installation)
PWRCORD10187019-A
Power Cord: North America and Asia, 2.3 meters, NEMA 5-15 plug, IEC60320-1-C13 connector, 10 A (for factory installation)
PWRCORD10187061-A
Power Cord: North America and Asia, 3.0 meters, NEMA 5-15 plug, IEC60320-1-C13 connector, 15 A (for factory installation)
PWRCORD10187086-A
Power Cord: Taiwan, 2.5 meters, CNS10917 plug, IEC60320-1-C13 connector, 10 A (for factory installation)
333U-10-10-C14
Power cord: Jumper, 1.0 meter, straight IEC60320-2-2 Sheet E (C14) plug, right angle IEC60320-1-C13 connector, 10A. 250 VAC
Call 1.877.STK.TAPE to order media from your local reseller or to obtain media pre-sales support.
E-mail: tapemediaorders_ww@oracle.com
See the tape media area on the corporate web site for additional information.
http://www.oracle.com/us/products/storage/overview/index.html
Click the Tape Storage tab and the StorageTek LTO Data Cartridges link.