Index

A B C D E F G H I K L M N O P R S T U V W

A

access door

closing, 13.4.2

opening, 13.4.1

safety interlocks, 13.2.1

safety release, 13.2.3

activated capacity

active storage regions, 4.1

defining, 4.3.1

reports, 4.3.2

cell activation rules, 4.1

changes and FC-SCSI connections, 4.1.2

changes and HLI connections, 4.1.1

orphaned cartridges and, 4.1.3

activated features

display current, 3.6

install, 3.2

active storage regions

automatic assignment, 4.1

defining, 4.3.1

manual assignment, 4.1

reports, 4.3.2

addressing, A

AEMs internal firmware, A.7.1.2

CAPs HLI, A.7.2

CAPs internal firmware, A.7.1

FC-SCSI, A.4

HLI-PRC, A.3

internal firmware, A.2

tape drives, A.6

AEM

allocating to partitions, 5.1

associating to a partition, 5.8.1

emergency access, 13.4.3

library partitions and, 5.1

properties, 8.4.1

rebooting, 11.1.1

removing partition associations, 5.8.1

status, 8.4.1

summary information, 8.4.1

using to bulk load cartridges, 8.3

using to bulk unload cartridges, 8.3

AEM access door

audits and, 13.4.4

closing, 8.5

fast access, 13.4.3

AEM operations

summarized, 8.3

AEM safety door

properties, 8.4.2

status, 8.4.2

audits

audit indicator, 6.11

description, 6.11

full library, 6.11.1.1

main access door and, 6.11

physical, 6.11.1, 6.11.1.1, 6.11.1.2

range of cells, 6.11.1.2

verified, 6.11.2

auto enter mode (CAPs)

described, 8.1

automated mode

returning the library to, 6.9.3

B

barcode presentation, 10.2.1, 10.2.1

C

CAP associations

library partitions and, 5.3.2, 5.8.1

removing, 5.8.1

CAP reservations

library partitions and, 5.2.2

overriding, 5.8.2

capacity

activated. See activated capacity.

CAPs

and library partitions, 5.1

auto enter mode, 8.1

closing, 8.5

display properties, 8.4.1

display status, 8.4.1

display summary information, 8.4.1

inserting cartridges, 10.7

library partitions and, 5.1, 5.8

making available for diagnostic moves, 8.6

manual mode, 8.1

self-test, 8.7, 9.6

states

library partitions and, 5.2.2.2, 5.3.2.1, 8.1.1

varying offline, 8.8

varying online, 8.8

cartridges

applying labels, 10.10.4

barcode presentation, 10.2.1, 10.2.1

display information, 10.4

ejecting into a partition, 5.8.1

ejects, 10.8

entering into a partition, 5.8.1

enters, 10.7

exterior cleaning, 10.10.2

handling, 10.10

inserting in a cell or drive, 10.10.1

inserting in the CAP, 10.7

inspecting, 10.10.1

list, 10.4

loading through the AEM, 8.3

locate by address, 10.5.2

locate by VOLID, 10.5.1

locating by address, 10.5

locating by VOLID, 10.5

move by VOLID, 10.6.1

move from specified location, 10.6.1

recovery moves, 10.6

storing, 10.10.3

unlabeled, 10.2

unloading through the AEM, 8.3

cautions

reentering cleaning cartridge, 10.1

solvents for cleaning a cartridge, 10.10.2

CenterLine, A.1

cleaning cartridges, 10.1

exporting, 9.1.7.2

importing, 9.1.7

list, 9.1.4

warning threshold, 9.1.6

D

device status, 6.1

listing codes, 12.6

diagnostic cartridges

description, 10.9

exporting, 10.9.2

importing, 10.9.1

library self-tests and, 6.7

management tasks, 10.9

diagnostic moves (robot)

controlling, 11.6.5

defining, 11.6.1

description, 11.6

managing definitions, 11.6.2

monitoring, 11.6.5

pool address range, 11.6

random access order, 11.6

robot selection, 11.6

saving, 11.6.3

sequential access order, 11.6

starting, 11.6.4

target address range, 11.6

diagnostic support files, 12.2

diagnostics

CAPs and, 8.6

domain, media labels, 10.2

drive cleaning

configuring library auto clean, 9.1.5

description, 9.1

display status of, 9.2

exporting cleaning cartridges, 9.1.7.2

importing cleaning cartridges, 9.1.7

library auto clean, 9.1.2

manual, 9.1.3

drive controller, 6.4.2

Drive Events Report, 9.3

Drive Media Events Report, 9.3

drive trays

status, 9.2

drive VOP

displaying for T10000, 9.2

drives

bringing online, 9.5

cleaning. See drive cleaning.

display drive properties, 9.2

display drive summary information, 9.2

display status, 9.2

LED status, 9.2

network data, 9.2

SCSI FastLoad and, 11.2.1.1, 11.2.1.1

states, 9.5

taking offline, 9.5

E

eject operations, 10.8

partitioned libraries, 5.8.1

enter operations, 10.7

partitioned libraries, 5.8.1

event monitors

description, 12.4.1

display, 12.5.1

display multiple, 12.5.3

spool data to a file, 12.5.2

F

FC-SCSI elements, A.4

FC-SCSI interface, 6.10

barcode presentation and, 10.2.1, 10.2.1

FastLoad feature and, 11.2.1.1, 11.2.1.1

G

General Events Statistics Report, 6.4.3.3, 6.4.3.3

H

hardware activation file

comparing to current features, 3.4

delete, 3.5

description, 3.1

display current, 3.6

displaying contents of, 3.4

download, 3.3

Feature Audit Log, 3.7

file type, 3.1

install, 3.4

installing, 3.2

hardware activation key file

overlaying, 3.1.1

hardware activation tasks, 3.2

HLI interface, 6.10

displaying port status, 6.4.1

HLI-PRC addressing, A.3

host interfaces

changing the type, 6.10

HLI. See HLI interface., 6.4.1

non-partitioned libraries and, 6.10

I

internal firmware addressing, A.2

K

key

maintenance, 13.1

L

library

placing in manual mode, 6.9.1

placing online, 6.9.2

returning to automated mode, 6.9.3

library auto clean, 9.1.2

library configuration

display, 6.4.2

library controller

display redundant electronics, 7.4, 7.4

properties, 6.4.2

library events, 12.4

library events. See Also event monitors.

library firmware upgrades, 6.2

activate, 6.2.2

download, 6.2.1

library initialization sequence, 13.3.2

library partitions

AEM associations and, 5.8.1

allocating an AEM CAP, 5.1

barcode presentation and, 10.2.1

CAP associations and, 5.3.2, 5.8.1, 5.8.1

CAP reservations and, 5.2.2, 5.8.2

CAP states and, 5.2.2.2, 5.3.2.1, 8.1.1

commit configuration changes, 5.7.4

configuration tasks, 5.7

create, 5.7.2

delete, 5.7.2.2

described, 5

design, 5.7.3

displaying, 4.3.3, 5.7.6

ejecting cartridges into, 5.8.1

entering cartridges into, 5.8.1

hosts and, 5

library hardware changes and, 5.5

library resources and, 5.6

orphaned cartridges in, 10.3

reports, 5.7.5

SCSI FastLoad feature and, 11.2.1.1

shared CAPs and, 5.3.2

using AEMs in, 5.1

using CAPs in, 5.1

using CAPs with, 5.1

verify, 5.7.3

library power down, 13.3.1

library power up, 13.3.2

library reboot, 6.8

library reports, 2.5

displaying, 6.4.3

saving data to a file,SL Console report tasks, 6.4.3

searching, 6.4.3

library self-tests, 6.7, 12.1

performing, 6.7, 6.7

library status, 6.1

display, 6.4.1

local operator panel

described, 2.9

entering data, 2.9.1

factory alignment, 2.9.3

logging in, 2.9.2

re-calibrating, 2.9.3

virtual keypad, 2.9.1

log snapshot file

generating process, 6.5.2

transfer process, 6.5.2

logs

Feature Audit Log, 3.7

M

main access door

audits and, 6.11

maintenance key, 13.1

manual CAP, 8.1

manual cleaning (drive), 9.1.3

manual mode

placing the library in manual mode, 6.9.1

returning the library to automated mode, 6.9.3

manual operations

safety precautions, 13.2

access door interlocks, 13.2.1

access door release, 13.2.3

general, 13.2

server power interrupt, 13.2.2

media

domain labels, 10.2

ID labels, 10.2

MIB file

described, 12.2

transfer process, 6.5.1

N

non-disruptive partitioning

FC-SCSI partitions and, 5.3.1

HLI partitions and, 5.2.1

O

orphaned cartridges

non-partitioned libraries and, 4.1.3

partitioned libraries and, 10.3

P

Pass-thru Ports (PTPs)

locating cartridges, 10.5

passwords

activation, 2.6.2

modifying, 2.6.2.1

placing the library in manual mode, 6.9.1

port bonding, 6.4.1

ports

status, 6.4.1

power down the library, 13.3.1

power supplies

monitoring tasks, 6.4.4

status of, 6.4.4

summary information, 6.4.4

power up the library, 13.3.2

R

reboot

library, 6.8

recovery moves, 10.6

redundant electronics

manual switch, 7.5

tasks, 7.4

reports

cartridge summary, 10.4

cartridge table, 10.4

drive events, 9.3

feature audit log, 3.7

result codes

listing, 12.6

returning the library to automated mode, 6.9.3

robot

display status of, 11.3

display summary information, 11.3

monitoring tasks, 11.3

properties, 11.3

SCSI FastLoad and, 11.2.1.1, 11.2.1.1

self-test, 11.5

varying offline, 11.4

varying online, 11.4

S

safety precautions, 13.2

access door interlocks, 13.2.1

access door release, 13.2.3

general, 13.2

servo power interrupt, 13.2.2

SCSI FastLoad, 11.2.1.1, 11.2.1.1

self-tests

CAP, 8.7

drive, 9.6

library, 6.7, 6.7, 6.7, 12.1

robot, 11.5

SL Console

activation password, 2.6.2, 2.6.2

communications failures, 6.1

description, 2

first-time access, 2.6.2

logging off, 2.6.4

modes, 2.1

modifying passwords, 2.6.2.1

screen, components, 2.3

screen, modifying layout, 2.3.1

security, 2.6

synchronize with library, 2.3.2.1

user ID, 2.6.1

SL Console Help

description, 2.4

navigation, 2.4

SL Console reports

Drive Events, 9.3

Drive Media Events, 9.3

General Events, 6.4.3.3, 6.4.3.3

types, 2.5.1

SLConsole

downloading, 2.2

media pack, 2.2

SNMP

transfer the library MIB file, 6.5.1

standalone SL Console

description, 2.8

logging in, 2.8.4

standalone SLConsole

updating, 2.8

status

library and devices, 6.1

status alerts

clearing, 6.6

described, 6.4.1

displaying, 6.4.1

T

tape drives

addressing, A.6

hardware numbering, A.6.1

HLI-PRCs, A.6.3

internal firmware address, A.6.2

transferring the log snapshot file, 6.5.2

troubleshooting, 12.3

U

User ID

types, 2.6.1

V

vary the library offline, 6.9.1

vary the library online, 6.9.2

VOP

displaying for T10000 drives, 9.2

W

Web-launched SL Console

client requirements, 2.7.2

description, 2.7

logging in using a browser, 2.7.3

logging in using an icon, 2.7.4

logging in using CLI, 2.7.3

security, 2.7.1

starting on a client, 2.7.3

updating on a client, 2.7

web-launched SLConsole

installing, 2.7