[Top] [Prev] [Next] [Bottom]

1. NATIVE Workstation Messages 1000-1099

1001	ERROR: Unused arguments passed to buildwsh
	Description	The command line option passed to the `buildwsh` command is not recognized as a valid option. This could also be caused by an extra "`-`" in the command line.
Action	Examine the command line that calls `buildwsh` and remove the extraneous option.
See Also	`buildwsh`(1)
1002	ERROR: Unable to execute the command command_string
	Description	While invoking the C compilation system to build a new Workstation Handler, an error was detected. This could happen for one of the following reasons: The C compilation system command was not found. The `cc` command returned an error while linking the new Workstation Handler. The `$CC` environmental variable was not set correctly. The `$CFLAGS` environmental variable has invalid options.
Action	Make sure the C compilation system is present on your machine. Make sure there is enough disk space available for the new Workstation Handler. This should be roughly the same as the existing `WSH` and the added object files. Examine the `$CC` and `$CFLAGS` variables and, if set, make sure the options are correct for your C compilation environment.
See Also	`cc`(1) in UNIX system reference manuals, `buildwsh`(1)
1003	*ERROR: Could not find buffer type type_val: subtype subtype_val* information**
	Description	This error occurs when the Workstation Handler receives a message from either a server or a workstation client, and it cannot find the buffer type information for the buffer type of the message.
Action	If the buffer type is views, then make sure the `$VIEWDIR` and the `$VIEWFILES` environment variables are set and the permissions of the directories and files are readable by the `WSH`. If the view has been recompiled, the `WSH` should be shut down and restarted because it has a cache of the recently used `VIEWS`. If this error occurs for other TUXEDO System/T buffer types and the `WSH` has been rebuilt using `buildwsh`, then the `WSH` should be rebuilt with the correct buffer type switch information.
See Also	`buffer`(3c), `buildwsh`(1), `viewfile`(5)
1004	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using `malloc` failed.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device.
See Also	`malloc`(3) in UNIX system reference manuals
1005	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using `malloc` failed.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device.
See Also	`malloc`(3) in UNIX system reference manuals
1006	ERROR: Failed to initialize global network information
	Description	The internal network information used by the Workstation Handler or the Workstation Listener was not initialized. This can happen if the system has run out of memory.
Action	Increase the virtual memory available for the `WSH` and `WSL` processes.
See Also	`malloc`(3) in UNIX system reference manuals
1007	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using `malloc` failed.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device.
See Also	`malloc`(3) in UNIX system reference manuals
1008	ERROR: Could not establish listening address on network string
	Description	This error occurs if the `WSH` or the `WSL` cannot advertise its listening address on the network. This could happen for one of the following conditions. The format of the address supplied to the `WSL` is incorrect. If the address format is incorrect, the network provider will be unable to advertise the address and the request fails. The address used in the `-n` command line option to the `WSL` is already in use by another process. For TCP/IP, this can be verified by using the netstat command. The system has run out of network addresses for the `WSH`. The `WSH` requests a new address from the system. If there are no addresses available, the request is rejected. A previously used address has not completed the close sequence. This occurs if the `WSL` or `WSH` was killed in an abortive manner such as kill -9. Some transports (among them, TCP/IP) keep the connection open for an "implementation dependent" time to flush the existing data on the buffered network connection.
Action	To correct the problem, match one of the following solutions with the problem descriptions above: Check that the address format is correct. For TCP/IP, the format is `0x0002ppppaaaaaaaa`. This is a hexadecimal representation of the TCP/IP address, where `pppp` is a unique port number and `aaaaaaaa` is the IP dotted number in the `/etc/hosts` file for the machine on which the `WSL` will run. See if other processes are using the requested network address. For TCP/IP, use the netstat command and, if the address is already in use, select a different address. If the system is out of network addresses, check with the system administrator to increase the number of addresses to use. If the connection is not closed yet, wait a few minutes and try again.
See Also	`netstat`(3) in UNIX system reference manuals, Administering the BEA TUXEDO System
1009	ERROR: Cannot decode TUXEDO header of the received message
	Description	The `WSH` or `WSL` read the data from the network. Each message has a TUXEDO System/T-specific header at the top of the message. If the message is corrupted or is smaller that the TUXEDO System/T header, this error occurs.
Action	Contact your BEA TUXEDO system Technical Support.
1010	ERROR: Couldn't convert buffer to current release format
	Description	This error occurs if a Workstation client and the native UNIX system machine are of different TUXEDO System/T releases and the message is from an older release. The error can also occur if the message received by the `WSH` or `WSL` is corrupted.
Action	Contact your BEA TUXEDO system Technical Support.
1011	ERROR: Couldn't convert buffer to native site format
	Description	The `WSH` was unable to convert a message from a workstation client format to the native format. This indicates that the buffer type is unknown to the `WSH`.
Action	Check the userlog for a message indicating the nature of the failure (in particular, the type and subtype of the buffer that could not be converted). It may be necessary to rebuild the `WSH` using build`wsh` to include additional application buffer types.
See Also	`buildwsh`(1)
1012	ERROR: Received message with an unknown internal type index indexval
	Description	While processing a message from the workstation client, the internal buffer type is unknown.
Action	Since the buffer type is set as part of converting to the native format, this error should not occur. Contact your BEA TUXEDO system Technical Support.
1013	*ERROR: Received message of unknown type 'typeval' subtype 'subtypeval'*
	Description	While processing a message from the workstation client, the application buffer type and subtype are unknown.
Action	Since the buffer type is set as part of converting to the native format, this error should not occur. Contact your BEA TUXEDO system Technical Support.
1014	*ERROR: Received message of unknown type 'type'*
	Description	While processing a message from the workstation client, the application buffer type is unknown.
Action	Since the buffer type is set as part of converting to the native format, this error should rarely occur. Contact your BEA TUXEDO system Technical Support.
1015	ERROR: Message decode failure
	Description	Decoding of the message received from the workstation client by the `encdec` function for the buffer type failed.
Action	Check the userlog for additional messages indicating why the decoding failed. If the buffer type or the encode/decode function is provided by the application, contact your system administrator. If this is one of the TUXEDO System/T-provided buffer types, contact your BEA TUXEDO system Technical Support.
See Also	`typesw`(5)
1016	ERROR: Post receive operation on message failed
	Description	Post-processing of the message received from the workstation client by the `postsend` function for the buffer type failed.
Action	Check the userlog for additional messages indicating why the post-processing failed. If the buffer type or the postsend function is provided by the application, contact your system administrator. If this is one of the TUXEDO System/T-provided buffer types, contact your BEA TUXEDO system Technical Support.
See Also	`typesw`(5)
1017	ERROR: Message presend routine failed
	Description	Pre-processing of the message being sent to the workstation client by the presend function for the buffer type failed.
Action	Check the userlog for additional messages indicating why the pre-processing failed. If the buffer type or the presend function is provided by the application, contact your system administrator. If this is one of the TUXEDO System/T-provided buffer types, contact your BEA TUXEDO system Technical Support.
See Also	`typesw`(5)
1018	ERROR: Invalid data length of 0, data not self describing
	Description	Pre-processing of the message being sent to the workstation client by the presend function for the buffer type returned 0. This indicates that a message length of 0 was presented by the application and the buffer type is not self-describing, such that the presend function cannot infer the desired transfer length.
Action	The application must provide a length for sending messages of the particular buffer type.
See Also	`typesw`(5)
1019	ERROR: Message conversion to workstation format failed
	Description	The `WSH` was unable to convert a message from a native format to workstation client format.
Action	This error should not occur. Contact your BEA TUXEDO system Technical Support.
1020	ERROR: Encoding of message header failed
	Description	Encoding of the header of the message being sent to a workstation client failed.
Action	Check the userlog for additional messages indicating why the decoding failed. Contact your BEA TUXEDO system Technical Support.
1021	ERROR: Encoding of message data failed
	Description	Encoding of the message being sent to the workstation client by the encdec function for the buffer type failed.
Action	Check the userlog for additional messages indicating why the encoding failed. If the buffer type or the encode/decode function is provided by the application, contact your system administrator. If this is one of the TUXEDO System/T-provided buffer types, contact your BEA TUXEDO system Technical Support.
See Also	`typesw`(5)
1023	WARN: No client context space available in handler
	Description	While setting up a connection for a new workstation client, the `WSH` ran out of room to keep context for clients.
Action	This error should occur rarely since the `WSL` transfers control of workstation client connections to `WSH` programs based on their current degree of multiplexing. Contact your BEA TUXEDO system Technical Support.
See Also	`WSL`(5)
1024	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using `malloc` failed.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device.
See Also	`malloc`(3) in UNIX system reference manuals
1025	ERROR: Expected numeric argument to -x option
	Description	An invalid argument was passed to the Workstation Listener, `WSL`, command line option. The argument to the `-x` option, the degree of multiplexing, needs to be numeric. This error causes the Workstation Listener not to be booted.
Action	Make sure the argument to the `-x` option is numeric.
See Also	`WSL`(5)
1026	ERROR: Handler received unexpected message
	Description	The `WSH` received a message without a client context (that is, intended for the Workstation Handler) that is not in the right format (it is not a workstation message).
Action	The message will be ignored. Contact your BEA TUXEDO system Technical Support.
1027	ERROR: Handler received unexpected opcode 0xcode
	Description	The `WSH` received a message without a client context (that is, intended for the Workstation Handler) that has an unrecognized operation code (normally, a shutdown message from the `WSL`).
Action	The message will be ignored. Contact your BEA TUXEDO system Technical Support.
1028	*WARN: Couldn't change to client context context_number, continuing*
	Description	The Workstation Handler encountered an error switching to the context of a client when dropping all connections during shutdown.
Action	The connection is ignored. Contact your BEA TUXEDO system Technical Support.
1029	ERROR: Sending of reply message to client failed
	Description	While sending a reply message to a client, the operation failed.
Action	Check the userlog for messages indicating the nature of the failure. It may indicate that the client is no longer accessible (either the network or machine may have failed). Contact your BEA TUXEDO system Technical Support.
1030	INFO: Work Station Handler joining application
	Description	This message indicates that a `WSH` process was started by the `WSL`, based on the command line options for the listener and the current demand by workstation clients.
Action	No action required.
See Also	`WSL`(5)
1031	*ERROR: Invalid command line argument 'arg' ignored*
	Description	An illegal command line option was found in the command line options for the `WSH`.
Action	This should be a rare event since the `WSH` is started by the `WSL` (it is not started directly by the administrator). Contact your BEA TUXEDO system Technical Support.
See Also	`WSL`(5)
1032	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using `malloc` failed.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device.
See Also	`malloc`(3) in UNIX system reference manuals
1033	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using `malloc` failed.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device.
See Also	`malloc`(3) in UNIX system reference manuals
1034	ERROR: Failed to attach to shared memory for listener table errno=errno_val
	Description	The Workstation Handler, `WSH`, failed in an attempt to attach a shared memory segment.
Action	This is an operating system error. Check the value of errno_val for an indication of the problem.
1035	ERROR: Handler table entry already occupied by pid
	Description	The `WSL` started a `WSH` and assigned it a slot that is already occupied by another `WSH` process with process identifier pid.
Action	Contact your BEA TUXEDO system Technical Support.
See Also	`WSL`(5)
1036	ERROR: Network provider returns a zero length network address, can't establish network address
	Description	The length of the network address that the `WSH` is using to establish a connection is 0. This is not valid (and should not occur).
Action	Contact your BEA TUXEDO system Technical Support.
1037	ERROR: Can't synchronize with /WS listener ... continuing
	Description	The connection between the `WSL` and the `WSH` that it is executing was lost by the forked `WSH` process. The pipe with `WSL` was lost and may be due to the `WSL` process being killed.
Action	No action required, although the cause of `WSL` dying should be investigated if not known.
See Also	`WSL`(5)
1038	WARN: Couldn't change to client context index, continuing
	Description	The Workstation Handler encountered an error switching to the context of a client when dropping all connections during shutdown.
Action	The connection is ignored. Contact your BEA TUXEDO system Technical Support.
1039	WARN: Can't use TPGETANY flag with tpcall()
	Description	The workstation client called `tpcall` with the `TPGETANY` option. This is not valid, and `TPEINVAL` will be returned to the application.
Action	No action required.
See Also	`tpcall`(3)
1040	WARN: tpsprio() call failed, tperrno = tperrno_val
	Description	A call to `tpsprio` in the `WSH` on behalf of the workstation client failed with tperrno set to tperrno_val.
Action	No action required.
See Also	`tpsprio`(3c)
1041	ERROR: Memory allocation failure
	Description	An attempt dynamically to allocate memory from the operating system using `malloc` failed.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device.
See Also	`malloc`(3) in UNIX system reference manuals
1042	ERROR: tpcall() call failed, tperrno = tperrno_val
	Description	A call to `tpcall` in the `WSH` on behalf of the workstation client failed with tperrno set to tperrno_val.
Action	No action required.
See Also	`tpcall`(3c)
1043	ERROR: tpacall() call failed, tperrno = tperrno_val
	Description	A call to `tpacall` in the `WSH` on behalf of the workstation client failed with tperrno set to tperrno_val.
Action	No action required.
See Also	`tpacall`(3)
1044	ERROR: tpgprio() call failed, tperrno = tperrno_val
	Description	A call to `tpgprio` in the `WSH` on behalf of the workstation client failed with tperrno set to tperrno_val.
Action	No action required.
See Also	`buildwsh`(1)
1045	ERROR: Sending of reply to tpacall() call to client failed
	Description	An attempt to send an acknowledgment of a `tpacall` request to the Workstation Client has failed.
Action	This is an internal message. This failure indicates a problem with the network, with the Workstation, or with the Workstation client process. Contact your BEA TUXEDO system Technical Support.
1046	ERROR: Sending of reply to tpinit() call to client failed
	Description	An attempt to send an acknowledgment of a `tpinit` request to the Workstation Client has failed.
Action	This is an internal message. This failure indicates a problem with the network, with the Workstation, or with the Workstation client process. Contact your BEA TUXEDO system Technical Support.
1047	ERROR: Sending of reply to tpterm() call to client failed
	Description	An attempt to send an acknowledgment of a `tpterm` request to the Workstation Client has failed.
Action	This is an internal message. This failure indicates a problem with the network, with the Workstation, or with the Workstation client process. Contact your BEA TUXEDO system Technical Support.
1048	ERROR: Sending of error reply to call client failed
	Description	An attempt to send an acknowledgment message to the Workstation Client has failed.
	Action	This is an internal message. This failure indicates a problem with the network, with the Workstation, or with the Workstation client process. Contact your BEA TUXEDO system Technical Support.
1049	ERROR: Couldn't create buffer for receiving messages
	Description	An attempt to create a buffer with `tpalloc` failed. This buffer is used to receive messages.
Action	This error indicates a resource problem. If there is not sufficient memory to allocate buffers, the Workstation Handler process can not operate. Please contact your System Support for help. If machine resources are sufficient, this would indicate an internal problem with the Workstation Handler. In this case, contact your BEA TUXEDO system Technical Support.
1050	ERROR: Error switching to the handler's context
	Description	The Workstation Handler was attempting to switch from a client context to the Workstation Handler context when it experienced an error.
Action	The error indicates an internal problem with the Workstation Handler. Contact your BEA TUXEDO system Technical Support.
1052	ERROR: Failed to process network event
	Description	The Workstation Handler was unable to process a network event using `tmnwevent`.
Action	The error indicates an internal problem with the Workstation Handler or the `LIBNET` software. Contact your BEA TUXEDO system Technical Support.
1053	ERROR: Error polling network connections
	Description	The Workstation Handler encountered an error polling a network connection using tmnwcpoll.
Action	The error indicates a network error. Check that the network connection to the Workstation Client has not gone down. If it has, the Workstation Client will have to rejoin the application. Contact your BEA TUXEDO system Technical Support.
1054	ERROR: Error generating network event list
	Description	The Workstation Handler encountered an error polling a network connection using tmnwcpoll.
Action	The error indicates a network error. Check that the network connection to the Workstation Client has not gone down. If it has, the Workstation Client will have to rejoin the application. Contact your BEA TUXEDO system Technical Support.
1055	ERROR: Connection to unassigned `WSH` rejected
	Description	The connection for the Workstation Client was timed out.
Action	This situation may happen if the system or the network is very busy, or if the network has gone down. The Workstation Client should try again to join the application.
1056	WARN: Couldn't change to client context index, continuing
	Description	The Workstation Handler encountered an error switching to the context of a client to do a `tpterm`.
Action	This error indicates an internal problem. Contact your BEA TUXEDO system Technical Support.
1057	ERROR: Error processing message received from network
	Description	The Workstation Handler encountered an error receiving a message from the network.
Action	This error could indicate a network problem or an internal System/T problem. Contact your BEA TUXEDO system Technical Support.
1058	ERROR: Received message with opcode other than init for non-existent context
	Description	The Workstation Handler has received a message from a process that has not joined the application.
Action	This message indicates an internal problem in communication between the Workstation Handler and the Workstation Client. Contact your BEA TUXEDO system Technical Support.
1059	ERROR: Received network message with unknown context
	Description	The Workstation Handler has received a message from a process that it does not know about.
Action	This message indicates an internal problem in communication between the Workstation Handler and the Workstation Client. Contact your BEA TUXEDO system Technical Support.
1060	ERROR: Received message with context associated with a different connection
	Description	The Workstation Handler, working on behalf of one client context, has received a message intended for a different client context.
Action	This message indicates an internal problem in communication between the Workstation Handler and the Workstation Client. Contact your BEA TUXEDO system Technical Support.
1061	ERROR: Received a reply message from a workstation
	Description	The Workstation Handler has received a message containing the reply protocol from a Workstation Client.
Action	A Workstation Client should never send a message with this protocol. This situation indicates an internal problem in communication between the Workstation Handler and the Workstation Client. Contact your BEA TUXEDO system Technical Support.
1062	ERROR: Sending of reply to tpbegin() call to client failed
	Description	An attempt to send an acknowledgment of a `tpbegin` request to the Workstation Client has failed.
Action	This is an internal message. This failure indicates a problem with the network, with the Workstation, or with the Workstation client process. Contact your BEA TUXEDO system Technical Support.
1063	ERROR: No more workstation handlers available
	Description	An attempt to start a new Workstation Handler process has failed because the maximum limit of Workstation Handlers has already been started.
Action	The maximum number of Workstation Handlers specified in the configuration file have been started. In order to increase this number, the "`CLOPT -M maxh`" value must be changed. This can be done in two ways: first, shut the application down and change the configuration file and reboot the application, or second, change the value dynamically with `tmconfig`(1), shut down and reboot only the Workstation Listener (`WSL`) server.
1064	ERROR: Error formatting command line options for handler
	Description	An error was encountered formatting the argument string needed for booting a Workstation Handler.
Action	This message would occur if there are more than 256 characters in the `CLOPT` string in the configuration file.
See Also	`WSL`(5), `servopts`(5)
1065	ERROR: Error retrieving machine table entry of the listener
	Description	An error was encountered trying to get internal machine information while booting a Workstation Handler.
Action	Contact your BEA TUXEDO system Technical Support.
1066	ERROR: Work Station Handler died, attempting restart
	Description	If a Workstation Handler process has died and the number of Workstation Handler processes booted is below the minimum specified in the configuration file, the BEA TUXEDO system attempts to boot a new Workstation Handler. This message is written to the userlog when this happens.
Action	Workstation Handlers should not die. If this happens, it could indicate an internal problem that requires attention. Additional Workstation Handlers may need to be booted, if the system is very busy.
1067	ERROR: Work Station Handler died, cleaning up
	Description	A Workstation Handler process has died and the number of Workstation Handler processes booted is below the minimum specified in the configuration file. An attempt to boot a new Workstation Handler has failed.
Action	This could either be an operating system error or an internal BEA TUXEDO system error. In the former case, please contact your system administrator. In the latter case, contact your BEA TUXEDO system Technical Support.
1068	*ERROR: Invalid command line argument 'arg' ignored*
	Description	An illegal command line option was found in the `CLOPT` string.
Action	Check the BEA TUXEDO Reference Manual for correct options.
See Also	`WSL`(5), `servopts`(5)
1069	ERROR: Sending of reply to tpbroadcast() or tpnotify() call to client failed
	Description	An attempt to send an acknowledgment of a `tpbroadcast` or `tpnotify` request to the Workstation Client has failed.
Action	Contact your BEA TUXEDO system Technical Support.
1070	ERROR: Cannot boot `WSL` with MAXWSCLIENTS for machine set to 0
	Description	The Workstation Listener process has failed to boot because the `MAXWSCLIENTS` parameter was not specified in the configuration file.
Action	The `MAXWSCLIENTS` parameter must be specified either in the RESOURCES section or in the *MACHINES section of the configuration file.
1071	ERROR: Memory allocation failure
	Description	The Workstation Listener failed in an attempt to create a buffer for storing Workstation Handler information.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device.
See Also	`malloc`(3) in UNIX system reference manuals
1072	ERROR: Memory allocation failure
	Description	The Workstation Listener failed in an attempt to create a buffer for storing a device name.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device.
See Also	`malloc`(3) in UNIX system reference manuals
1073	ERROR: Memory allocation failure
	Description	The Workstation Listener failed in an attempt to create a buffer for storing a Workstation Handler's name.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device.
See Also	`malloc`(3) in UNIX system reference manuals
1074	ERROR: Memory allocation failure
	Description	The Workstation Listener failed in an attempt to create a buffer for storing a network address.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine. Increase the space on the swap device.
See Also	`malloc`(3) in UNIX system reference manuals
1075	ERROR: Can't get machine entry for listener
	Description	The Workstation Listener encountered an error attempting to read the *MACHINES entry from the configuration file.
Action	Make sure the `TUXCONFIG` file has not been removed or corrupted. If this is not the problem, contact your BEA TUXEDO system Technical Support.
1076	ERROR: Failed to create to shared memory for listener table, errno = errno_val
	Description	The Workstation Listener failed in an attempt to create a shared memory segment.
Action	This is an operating system error. Check the value of errno_val for an indication of the problem.
See Also	`Uunix_err`(3c)
1077	ERROR: Failed to update server table entry, tperrno = `tperrno_val`
	Description	The Workstation Listener failed in an attempt to update the Bulletin Board.
Action	Check that the shared memory segment that contains the Bulletin Board has not been removed. If it has, then the application will need to be rebooted. Otherwise, this error would indicate an internal error. In this case, contact your BEA TUXEDO system Technical Support.
See Also	`tperrno`(5)
1078	ERROR: Failed to attach to shared memory for listener table, errno = errno_val
	Description	The Workstation Listener failed in an attempt to attach a shared memory segment.
Action	This is an operating system error. Check the value of errno_val for an indication of the problem.
See Also	`tperrno`(5)
1079	ERROR: Error starting minimum number of handlers
	Description	The Workstation Listener encountered an error attempting to boot the minimum number of Workstation Handlers.
Action	This could be an operating system error. Perhaps there are too many processes running. Or, this could be an internal error. Check the log file for other messages relating to this message. In this case, contact your BEA TUXEDO system Technical Support.
1080	ERROR: Error polling network connections
	Description	The Workstation Listener encountered an error polling a network connection.
Action	This error indicates a network error. Check with your system administrator to see if the network is down.
1081	ERROR: Error servicing network event
	Description	The Workstation Listener was unable to process a network event.
Action	This error indicates an internal problem with the Workstation Listener or the `LIBNET` software. Contact your BEA TUXEDO system Technical Support.
1082	ERROR: Error adding connection request to event list
	Description	The Workstation Listener was unable to allocate space on the event list.
Action	This error indicates a resource problem. If there is not sufficient memory to allocate buffers, the Workstation Listener process can not operate. Please contact your BEA TUXEDO system Technical Support for help.
1083	ERROR: Error assigning connection request, can't create any more handlers
	Description	The Workstation Listener was unable to start a new Handler.
Action	The most likely problem is that the maximum number of Workstation Handlers specified in the configuration file have been started. In order to increase this number, the `CLOPT -M maxh` value must be changed. This can be done in two ways: first, shut the application down and change the configuration file and reboot the application, or second, change the value dynamically with `tmconfig`(1), shut down and reboot only the Workstation Listener (`WSL`) server. Another possible source of the problem could be that the number of processes allowable by a user (`ulimit`) has been reached. If this is the case, consult with your System Administrator to increase this limit.
1086	*ERROR: Message conversion to release rel* format failed**
	Description	The Workstation Handler/Listener was unable to change the release structure to 4.2.
Action	Contact your BEA TUXEDO system Technical Support.
1087	ERROR: tpalloc() failed, tperrno = tperrno_val
	Description	The Workstation Handler failed in an attempt to create a buffer needed for encoding a message.
Action	This error indicates a resource problem. If there is not sufficient memory to allocate buffers, the Workstation Handler process can not operate. Please contact your BEA TUXEDO system Technical Support for help.
1088	ERROR: tpinit() failed, tperrno = tperrno_val
	Description	The `tpinit`(3c) function call used to connect a workstation client to a TUXEDO System/T application has failed. Further information about the cause of the failure is provided by the value of tperrno. By examining the `<atmi.h>` header file, this numeric `tperrno` value may be converted to a symbolic value. Potential causes of each such symbolic value are listed on the `tpinit`(3c) reference page.
Action	Refer to the `tpinit`(3c) reference page for causes of the specific `tperrno` value that was reported to the application. Eliminate the potential causes of such an error and retry the failed operation.
See Also	`tpinit`(3c), `tperrno`(5)
1089	ERROR: tpscmt() failed, tperrno = tperrno_val
	Description	While attempting to commit a transaction on behalf of a workstation client, the workstation handler process was unable to set the transaction commit control characteristic for the transaction to `TP_CMT_LOGGED`. (For further information on the transaction commit control characteristic, refer to the `tpscmt`(3c) reference page.) For this reason, the attempt to commit the transaction failed.
Action	Since the transaction cannot be committed, it will be necessary for the user to abort it. The value of `tperrno` and immediately preceding messages in the userlog may provide further information as to the cause of the error.
See Also	`tpabort`(3c), `tpcommit`(3c), `tpscmt`(3c), `tperrno`(5)
1090	ERROR: tpscmt() failed, tperrno = tperrno_val
	Description	While attempting to commit a transaction on behalf of a workstation client, the workstation handler process was unable to set the transaction commit control characteristic for the transaction to `TP_CMT_COMPLETE`. (For further information on the transaction commit control characteristic, refer to the `tpscmt`(3c) reference page.) For this reason, the attempt to commit the transaction failed.
Action	Since the transaction cannot be committed, it will be necessary for the user to abort it. The value of `tperrno` and immediately preceding messages in the userlog may provide further information as to the cause of the error.
See Also	`tpabort`(3c), `tpcommit`(3c), `tpscmt`(3c), `tperrno`(5)
1096	ERROR: Sending of reply to tpcommit() call to client failed
	Description	An attempt to send an acknowledgment of a `tpcommit` request to the Workstation Client has failed.
Action	This is an internal message. This failure indicates a problem with the network, with the Workstation, or with the Workstation client process. Contact your BEA TUXEDO system Technical Support.
1097	ERROR: Sending of reply to tpabort() call to client failed
	Description	An attempt to send an acknowledgment of a `tpabort` request to the Workstation Client has failed.
Action	This is an internal message. This failure indicates a problem with the network, with the Workstation, or with the Workstation client process. Contact your BEA TUXEDO system Technical Support.
1099	ERROR: Could not find correct number of active handlers, found num1, expected num2
	Description	While being restarted after the death of a previous workstation listener process, the workstation listener found an inconsistency in the existing workstation specific shared memory regarding the number of workstation handler processes. The `WSL` attempts to shut down any associated `WSH` processes that it knows about, removes the inconsistent shared memory, and exits.
Action	The administrator should check for any stray workstation handler (`WSH`) processes associated with this particular workstation listener, and see that they are manually terminated. The administrator may then re-boot the workstation listener process.

[Top] [Prev] [Next] [Bottom]