[Top] [Prev] [Next] [Bottom]

1. LIBWSC Messages 1000-1099

1000	ERROR: Unable to send message
	Description	An attempt to send a request to the Workstation Handler process failed during a `tpacall`. This could be a result of the network going down, the Workstation Handler process not running, or the site of the Workstation Handler going down.
Action	Shut the client down and attempt to reconnect. If this fails, contact your BEA TUXEDO system Technical Support.
1001	ERROR: Unable to get reply
	Description	An attempt to receive an acknowledgment to a `tpacall` request failed. This could be the result of the network going down, the Workstation Handler process not running, or the site of the Workstation Handler going down.
Action	Shut the client down and attempt to reconnect. If this fails, contact your BEA TUXEDO system Technical Support.
1002	ERROR: tpcommit message send failure
	Description	An attempt to send a request to the Workstation Handler process failed during a `tpcommit`. This could be a result of the network going down, the Workstation Handler process not running, or the site of the Workstation Handler going down.
Action	Shut the client down and attempt to reconnect. If this fails, contact your BEA TUXEDO system Technical Support.
1004	ERROR: Unable to set type switch index
	Description	An attempt to check a buffer type or subtype failed during a call to `tpalloc` because the type or subtype is not in the buffer type switch.
Action	Check that the type and/or subtype is listed in the file `tmtypesw.c`.
1005	ERROR: Memory allocation failure
	Description	An attempt to allocate memory failed during a call to `tpalloc`.
Action	Check that size requested is not inappropriately large. Check that the application is freeing unneeded buffers before attempting to allocate new buffers.
1006	ERROR: Type switch buffer initialization failure
	Description	An attempt to initialize the buffer failed during a call to `tpalloc`.
Action	Check that the initialization function for this buffer type exists as specified in the buffer type switch.
1007	ERROR: Unable to set type switch index
	Description	An attempt to check a buffer type or subtype failed during a call to `tprealloc`. This is caused by specifying a type or subtype that is not in the buffer type switch.
Action	Check that the type and/or subtype is listed in the file tmtypesw.c.
1009	ERROR: Type switch reinitialization failure
	Description	An attempt to reinitialize a buffer failed during a call to `tprealloc`.
Action	Check that the re-initialization function for this buffer type exists as specified in the buffer type switch.
1010	ERROR: Type switch uninitialization failure
	Description	An attempt to uninitialize a buffer failed during a call to `tpfree`.
Action	Check that the uninitialization function for this buffer type exists as specified in the buffer type switch.
1011	ERROR: tpcall message send failure
	Description	An attempt to send a request to the Workstation Handler process failed during a `tpcall`. This could be a result of the network going down, the Workstation Handler process not running, or the site of the Workstation Handler going down.
Action	Shut the client down and attempt to reconnect. If this fails, contact your BEA TUXEDO system Technical Support.
1013	ERROR: tpcall get reply failed
	Description	An attempt to receive an acknowledgment to a `tpcall` request failed. This could be the result of the network going down, the Workstation Handler process not running, or the site of the Workstation Handler going down.
Action	Shut the client down and attempt to reconnect. If this fails, contact your BEA TUXEDO system Technical Support.
1014	ERROR: Unable to create temporary file
	Description	An attempt to open a file for temporary storage of a reply message failed. This is an operating system error that could be a result of insufficient space in the file system or improper permissions on the device.
Action	The amount of the space on the specified device should be checked. If the environment variable `TMPDIR` has been specified, be sure the indicated directory exists and is writable by the application.
1015	ERROR: Unable to write to temporary file
	Description	An attempt to write to a file opened for temporary storage of a reply message failed. This is an operating system error that could be a result of insufficient space in the file system.
Action	The amount of the space on the specified device should be checked.
1016	ERROR: Unable to open temporary file
	Description	An attempt to open a file failed. This file was created for temporary storage of a reply message. This is an operating system error that could be a result of an accidental deletion of the file, a change in file permissions, or a hardware problem.
Action	Files created for this purpose have a prefix of `WS`. Check for the existence of such files in the specified directory. If none are found, restart the client.
1017	ERROR: Unable to read from temporary file
	Description	An attempt to read from a temporary file failed. This file was created for temporary storage of a reply message. This is an operating system error.
Action	This error would occur after the file has been successfully opened for reading. This could indicate a permissions problem or a hardware failure.
1018	ERROR: Too many outstanding handles
	Description	The application has exceeded the limit (50) of allowable outstanding handles.
Action	The application must not have more than 50 outstanding handles at any one time. This error message also indicates an internal problem within the system because `tpcall` should have returned `TPELIMIT`. If this error occurs, contact your BEA TUXEDO system Technical Support.
1019	ERROR: Invalid array index
	Description	The application has received an unknown handle from the Workstation Handler. An attempt to delete this handle entry has failed.
Action	The application should be restarted. If the problem still occurs, contact your BEA TUXEDO system Technical Support.
1020	ERROR: Unable to obtain authentication level
	Description	An attempt to connect to the BEA TUXEDO application has failed during a `tpchkauth` call. There are a number of reasons this could happen. The most obvious ones are the network address, `WSNADDR`, is incorrect or the network device, `WSDEVICE`, is not specified or is incorrect. Other possibilities for this failure are the network may be down, the Workstation Listener process may not be running, or the site of the Workstation Handler may be down.
Action	The `WSNADDR` must be same as the listening address of the Workstation Listener specified in the configuration file. The `WSDEVICE` must be specified for TLI. If these are not the problem, then check with the system administrator for the status of the Workstation Listener and its site. Contact your BEA TUXEDO system Technical Support for any other problem.
1021	ERROR: tpcommit message receive failure
	Description	An attempt to receive a reply from the Workstation Handler process failed during a tpcommit. This could be a result of the network going down, the Workstation Handler process not running, or the site of the Workstation Handler going down.
Action	Shut the client down and attempt to reconnect. If this fails, contact your BEA TUXEDO system Technical Support.
1022	ERROR: Unable to send init request
	Description	An attempt to send a request to the Workstation Handler process failed during a `tpinit`. This could be a result of the network going down, the Workstation Handler process not running, or the site of the Workstation Handler going down.
Action	Shut the client down and attempt to reconnect. If this fails, contact your BEA TUXEDO system Technical Support.
1023	ERROR: Unable to get reply to init request
	Description	An attempt to receive a reply from the Workstation Handler process failed during a `tpinit`. This could be a result of the network going down, the Workstation Handler process not running, or the site of the Workstation Handler going down.
Action	Shut the client down and attempt to reconnect. If this fails, contact your BEA TUXEDO system Technical Support.
1025	ERROR: Unable to send tpterm request
	Description	An attempt to send a request to the Workstation Handler process failed during a `tpterm`. This could be a result of the network going down, the Workstation Handler process not running, or the site of the Workstation Handler going down.
Action	Shut the client down and inform the BEA TUXEDO system administrator. The administrator will have to remove the client entry.
1026	ERROR: Unable to get reply to tpterm request
	Description	An attempt to receive a reply from the Workstation Handler process failed during a `tpterm`. This could be a result of the network going down, the Workstation Handler process not running, or the site of the Workstation Handler going down.
Action	Shut the client down and inform the BEA TUXEDO system administrator. The administrator may have to remove the client entry.
1027	ERROR: Unable to connect to WSH
	Description	An attempt to connect to the TUXEDO System/T application has failed during a `tpchkauth` call. There are a number of reasons this could happen. The most obvious ones: the network address, `WSNADDR`, may be incorrect, the network device, `WSDEVICE`, may be incorrect or not specified. Other possibilities: the network may be down, the `WSL` may not be running, or the site of the `WSH` may be down.
Action	The `WSNADDR` must be set to the listening address of the `WSL` specified in the configuration file. `WSDEVICE` is required for TLI. If both settings are okay, check with the system administrator for the status of the Workstation Listener and its site. If this fails to resolve the problems, contact your BEA TUXEDO system Technical Support.
1028	ERROR: Memory allocation failure
	Description	An attempt to allocate memory failed while creating an in-memory buffer type switch. This allocation is not very large and it happens only once when the client is joining the application. This failure would indicate a more serious problem of lack of machine resources.
Action	Consult your UNIX system administrator.
1029	ERROR: Unable to retrieve stored reply
	Description	An attempt to retrieve a stored reply failed. This message was either stored in memory or in a temporary file.
Action	If the message was stored in memory, then this indicates an internal BEA TUXEDO problem. In this case the client should be shut down and restarted. Your BEA TUXEDO system Technical Support should be informed. If the message was stored in a temporary file, this could indicate a permissions problem or a hardware failure. Consult your UNIX system administrator in this case.
1030	ERROR: Handle not stored
	Description	The application has asked for a reply with a handle unknown to the system. This error should have been detected in tpgetrply. If the handle is valid, this would indicate an internal BEA TUXEDO error.
Action	The application should be restarted. If the problem still occurs, contact your BEA TUXEDO system Technical Support.
1031	ERROR: Send of OWS_GETRPLY message failed
	Description	An attempt to send a request to the Workstation Handler process failed. This could be a result of the network going down, the Workstation Handler process not running, or the site of the Workstation Handler going down.
Action	Shut the client down and attempt to reconnect. If this fails, contact your BEA TUXEDO system Technical Support.
1032	ERROR: Failed to receive expected reply
	Description	An expected reply from the Workstation Handler process was not received. This could be a result of the network going down, the Workstation Handler process not running, or the site of the Workstation Handler going down. It could also indicate the client process and the Workstation Handler are out of sync. This should not happen if the Workstation Handler is running.
Action	Shut the client down and attempt to reconnect. If this fails, contact your BEA TUXEDO system Technical Support.
See Also	BEA TUXEDO Workstation Guide
1033	ERROR: Failure to get a message reply
	Description	An attempt to receive a reply from the Workstation Handler process failed. This could be a result of the network going down, the Workstation Handler process not running, or the site of the Workstation Handler going down.
Action	Shut the client down and contact your BEA TUXEDO system Technical Support. The BEA TUXEDO administrator will have to remove the old client entry.
1034	ERROR: Received unexpected message with opcode opcode
	Description	An unexpected reply was received from the Workstation Handler process. This would indicate the client and Workstation Handler processes are out of sync.
Action	Shut the client down and report this message to your BEA TUXEDO system Technical Support. The BEA TUXEDO administrator will have to remove the old client entry.
1035	ERROR: Unable to save a message reply
	Description	An attempt to save a message failed. There are two possible causes. The first is that the environment variable `WSRPLYMAX` was set too high and an attempt to allocate space for the message failed. The second is an attempt to write to a file opened for temporary storage of a reply message failed. This is an operating system error that could be a result of insufficient space in the file system.
Action	In the first case, the value of `WSRPLYMAX` should be lowered. The client must be restarted to get the new value. In the second case, the amount of the space on the specified device should be checked.
1036	ERROR: Unexpected opcode returned opcode
	Description	An unexpected reply was received from the Workstation Handler process. This would indicate the client and Workstation Handler processes are out of sync.
Action	Shut the client down and report this message to your BEA TUXEDO system Technical Support. The BEA TUXEDO administrator will have to remove the old client entry.
1037	ERROR: Network message receive failure
	Description	An attempt to receive a message from the network failed. This does not mean there was no message. This could be a result of the network going down or a memory failure in `LIBNET`.
Action	Shut the client down and contact your BEA TUXEDO system Technical Support. The BEA TUXEDO administrator will have to remove the old client entry.
1040	ERROR: Decode of header failed
	Description	An attempt to decode a message header failed.
Action	Shut the client down and contact your BEA TUXEDO system Technical Support.
1041	*ERROR: Received message of unknown type 'type' subtype 'subtype'*
	Description	An message with an unknown type or subtype was received.
Action	Shut the client down and contact your BEA TUXEDO system Technical Support. The buffer type switch for this client may need to be rebuilt.
1042	*ERROR: Received message of unknown type 'type'*
	Description	An message with an unknown type was received.
Action	Shut the client down and contact your BEA TUXEDO system Technical Support. The buffer type switch for this client may need to be rebuilt.
1043	ERROR: Message data decode/decrypt failure
	Description	An attempt to decode a message failed.
Action	Shut the client down and contact your BEA TUXEDO system Technical Support.
1044	ERROR: Post receive on message failed
	Description	An attempt to post-receive a message failed. This is done in a buffer-type switch function.
Action	Shut the client down and contact your BEA TUXEDO system Technical Support.
1045	ERROR: Presend on message failed
	Description	An attempt to presend a message failed. This is done in a buffer-type switch function.
Action	Shut the client down and contact your BEA TUXEDO system Technical Support.
1046	ERROR: Invalid data length of 0
	Description	An attempt to send a message failed because there was no data.
Action	If the service really does not require data, send a small amount so that the call will succeed.
1048	ERROR: Encoding of message header failed
	Description	An attempt to encode a message header failed.
Action	Stop the client and contact BEA TUXEDO system Technical Support.
1049	ERROR: Encoding of message data failed
	Description	An attempt to encode a message failed.
Action	Stop the client and contact BEA TUXEDO system Technical Support.
1050	ERROR: tpsetunsol not called, dropping unsolicited message.
	Description	An unsolicited message was received but this client has not set the unsolicited message handling function to receive these messages.
Action	This is not necessarily an error. If no message handling function is specified, messages are dropped. This error documents that action. If the client does wish to receive unsolicited messages, the tpsetunsol function should be called to set the function to process them.
See Also	`tpsetunsol`(3c)
1051	ERROR: Unable to set environment variables
	Description	An attempt to read environment variables from the file designated by `WSENVFILE` failed.
Action	Check that `WSENVFILE` is set and it is describing the correct file. Also check that the contents of the file follow the form `VARIABLE=` string. Full path names must be entered for those variables describing files.
1052	ERROR: Environment variable WSNADDR not set
	Description	The environment variable `WSNADDR` is not set.
Action	The environment variable `WSNADDR` must be set to allow the Workstation Client to connect to the BEA TUXEDO application. This variable must be exported into the environment or it must be placed in a file designated by `WSENVFILE`.
1053	ERROR: Invalid network address
	Description	The address specified by `WSNADDR` contains an invalid character. Only hexadecimal values are allowed.
Action	Check that the value of the environment variable `WSNADDR` matches the listening address of the Workstation Listener as specified in the configuration file.
1054	ERROR: Unable to access network
	Description	An attempt to open the device specified by the environment variable `WSDEVICE` failed.
Action	Check that the value of the environment variable `WSDEVICE` is correct for the networking used.
1055	ERROR: Unable to establish WSL connection
	Description	An attempt to connect to the Workstation Listener process failed. There are a number of reasons that could cause this problem. The address could be incorrect. Other causes could be that the Workstation Listener process is not running, the network is down, or the host machine is down.
Action	Check that the value of the environment variable `WSNADDR` matches the listening address of the Workstation Listener as specified in the configuration file.
1056	ERROR: Unable to allocate network buffer
	Description	An attempt to allocate a buffer for the network calls failed. This may be a memory resource problem.
Action	Be sure that the application is managing resources correctly. This is particularly important in an MS-DOS environment. Consult with your system administrator.
1057	ERROR: Unable to send message to WSL
	Description	An attempt to send a message to the Workstation Listener process failed.
Action	Check that the machine types have not been set to be the same when they should be different. If the architectures are different, the environment variable `WSTYPE` should be different than the machine type in the configuration file. Also check that the Workstation Listener process is running.
1059	ERROR: WSL returns error on connection request
	Description	An attempt to get the reply to a connection request has failed. This could happen if the Workstation Listener process went down before it could send the reply.
Action	Check that the Workstation Listener process is running. If this is not the case, contact your BEA TUXEDO system Technical Support.
1060	ERROR: Unable to establish connection on native site
	Description	The return value on a connection request to the Workstation Listener Process indicates an error.
Action	Check the value of `tperrno` for some indication of the cause of the error.
1061	ERROR: Network address too long
	Description	The address specified by `WSNADDR` contains too many characters.
Action	Check that the value of the environment variable `WSNADDR` matches the listening address of the Workstation Listener as specified in the configuration file.
1062	ERROR: Environment variable TUXDIR must be set
	Description	The environment variable `TUXDIR` is not set.
Action	The environment variable `TUXDIR` must be set to allow the Workstation Client to run. This variable must be exported into the environment or it must be placed in a file designated by `WSENVFILE`.
1063	ERROR: Unable to open WSH connection
	Description	An attempt to open a network connection failed. This is a rare event because the client has just connected successfully to the Workstation Listener. It is now failing to open a network connection to the Workstation Handler.
Action	Contact your BEA TUXEDO system Technical Support.
1064	ERROR: Unable to establish WSH connection string
	Description	An attempt to connect to the Workstation Handler process failed. This is a rare occurrence because the application has just communicated successfully with the Workstation Listener process. It is possible that the Workstation Handler process is not running, the network has just gone down, or the host machine has just gone down.
Action	If none of the above is true, contact your BEA TUXEDO system Technical Support.
1065	ERROR: Unable to close WSH connection
	Description	An attempt to close the connection to the Workstation Handler process failed. This is a rare event because the application has just communicated successfully with the Workstation Handler process. It is possible the network has just gone down. This would not affect the disconnect from the BEA TUXEDO application. It might indicate a network problem.
Action	Contact your system administrator.
1071	ERROR: Path name of TUXDIR is too long
	Description	The environment variable `TUXDIR` is set but the path specified is greater than 78 characters.
Action	The file system may need to be reorganized in order to shorten the path from root to the location of the BEA TUXEDO software. Consult with your system administrator.
1073	ERROR: Handle not active
	Description	A request to retrieve a message failed because the entry is not valid. If the application requested a message with an invalid handle, it should have been detected at a higher level. Detection at this level indicates an internal error.
Action	Please make a record of the actions that caused this error and contact your BEA TUXEDO system Technical Support.
1074	ERROR: Memory allocation failure
	Description	An attempt to allocate memory to save a message failed.
Action	The value of `WSRPLYMAX` should be lowered. This will cause messages to be stored in temporary files rather than memory. The client must be restarted to get the new value. Another solution is to do synchronous requests with `tpcall`. This will make it unnecessary to store replies.
1075	ERROR: Unable to store message in temporary file
	Description	An attempt to save a reply message in a temporary file has failed. If the application has the necessary permissions, then the device must be full.
Action	Check the setting of the environment variable `TMPDIR`. This may be set to a file system with restrictive permissions, or it may be full. Resetting this variable to a file system with sufficient space may solve the problem. Another solution is to use the synchronous method, `tpcall`, to make service requests. This will make it unnecessary to save replies.
1076	ERROR: Invalid handle
	Description	An attempt was made to retrieve a message with an invalid handle.
Action	Check for an application error that would cause this situation. If no errors are found, contact your BEA TUXEDO system Technical Support.
1077	ERROR: Unable to resize message buffer
	Description	An attempt failed to reallocate a buffer to hold a message that had been saved in a temporary file.
Action	This is a memory problem. Attempt to free up resources for system use. There may be some unnecessary buffers in the application. Another solution is to use synchronous service requests with `tpcall`. This will make it unnecessary to store replies.
1078	ERROR: Unable to read message from temporary file
	Description	An attempt to read from a temporary file failed. This file was created for temporary storage of a reply message. This is an operating system error.
Action	The error would occur after the file has been successfully opened for reading. It could indicate a permissions problem or a hardware failure.
See Also	BEA TUXEDO Workstation Guide
1079	ERROR: Unable to get data
	Description	An attempt was made to send a broadcast message with a buffer that was not obtained with `tpalloc`. The system is unable to get the data from an unknown buffer type.
Action	Allocate the buffer for the broadcast message with `tpalloc` and attempt to do the broadcast again. If this fails, contact your BEA TUXEDO system Technical Support.
1080	ERROR: Message presend routine failed
	Description	An attempt to presend a buffer for a broadcast message failed.
Action	If this happens, record the circumstances that caused the problem and contact your BEA TUXEDO system Technical Support.
1082	ERROR: Unable to send unsolicited message
	Description	An attempt to send a broadcast or tpnotify message failed on a network send. The error could be that an invalid buffer type was used. The buffer must be obtained by a call to `tpalloc`. If there is no problem with the application, then it could be either a network problem, a problem with the host machine, or the Workstation Handler process is no longer running.
Action	For these situations, consult the BEA TUXEDO system administrator.
1083	ERROR: Unable to get reply to unsolicited message request
	Description	An attempt to receive the acknowledgment reply for a broadcast or tpnotify message failed on a network receive. This would indicate either a network problem, the host machine is down, or that the Workstation Handler process is no longer running.
Action	Consult the BEA TUXEDO system administrator.
1085	ERROR: Unable to get reply to unsolicited message request
	Description	An attempt to do a network receive failed during a check for unsolicited messages. This does not mean there were no messages. This would indicate either a network problem, the host machine is down, or that the Workstation Handler process is no longer running.
Action	Consult the BEA TUXEDO system administrator.
1087	ERROR: Invalid arguments passed to program
	Description	An attempt to build a DOS workstation client failed because invalid arguments were passed to the buildclt command.
Action	Correct the arguments to `buildclt` and re-execute the command. If unsure about the proper arguments, refer to the on-line usage message.
See Also	`buildclt`(1)
1088	ERROR: Cannot execute command compiler
	Description	An attempt to execute the compiler failed.
Action	Check the BEA TUXEDO Reference Manual for the proper use of the `buildclt` command.
See Also	`buildclt`(1)
1089	ERROR: Commit error due to outstanding handles
	Description	An attempt to commit a transaction with outstanding handles failed. This is an application error.
Action	Ensure that there are no outstanding handles before calling tpcommit.
See Also	`tpcommit`(3c)
1090	ERROR: Unable to allocate system buffer
	Description	An attempt to allocate memory for a system buffer failed.
Action	The system can not operate without sufficient space for system buffers. There are several strategies that an application can employ to solve this problem. Be sure there are no large application buffers that are not necessary. If asynchronous messages are being used, the value of `WSRPLYMAX` could be lowered. This will cause messages to be stored in temporary files rather than memory. The client must be restarted to get the new value. An alternative to the last solution is to do synchronous requests with `tpcall`. This will make it unnecessary to store replies.
1091	ERROR: Unable to get buffer for tpabort request, transaction will time-out
	Description	An attempt to allocate memory for a system buffer to send an abort request failed. The system will time the transaction out so it will eventually be aborted.
Action	Whenever an allocation of a system buffer fails, the advice is the same. Try to reduce the memory usage of the application. There are several strategies that an application can employ to solve this problem. Be sure there are no large application buffers that are not necessary. If asynchronous messages are being used, the value of `WSRPLYMAX` could be lowered. This will cause messages to be stored in temporary files rather than memory. The client must be restarted to get the new value. An alternative to the last solution is to do synchronous requests with `tpcall`. This will make it unnecessary to store replies.
1092	ERROR: Unable to get buffer for tpabort reply, transaction will time-out
	Description	An attempt to allocate memory for a system buffer to receive an abort reply failed. The system will time the transaction out so it will eventually be aborted.
Action	Whenever an allocation of a system buffer fails, the advice is the same. Try to reduce the memory usage of the application. There are several strategies that an application can employ to solve this problem. Be sure there are no large application buffers that are not necessary. If asynchronous messages are being used, the value of `WSRPLYMAX` could be lowered. This will cause messages to be stored in temporary files rather than memory. The client must be restarted to get the new value. An alternative to the last solution is to do synchronous requests with `tpcall`. This will make it unnecessary to store replies.
1094	ERROR: Unknown buffer type
	Description	The application is attempting to send a broadcast message with an unknown type.
Action	The application must use a buffer obtained from `tpalloc` to send an unsolicited message. Either the application must be changed or the buffer type switch for this client may need to be rebuilt with the new type. Contact your BEA TUXEDO system Technical Support for help with the latter.
1095	ERROR: Invalid data length of 0, data not self describing
	Description	The application is attempting to send a broadcast message with no data. This is not allowed in order to eliminate unnecessary messages in the system.
Action	Either send data in the message or send a message with "minimal" data to get around the check.
1098	ERROR: Unable to send tpabort request, transaction will time-out
	Description	An attempt to send a request to abort a transaction failed. The system will time the transaction out so it will eventually be aborted. For that reason an error is not returned. However, this is an indication of some other problem that should be investigated.
Action	This problem is the result of either a network failure, or the Workstation Handler or its site being down. Contact your BEA TUXEDO system administrator for advice with these problems.
1099	ERROR: Unable to receive tpabort reply
	Description	An attempt to receive a reply from the Workstation Handler process failed during a `tpabort`. This could be a result of the network going down, the Workstation Handler process not running, or the site of the Workstation Handler going down. In any event, the transaction will be timed out.
Action	If any of the above problems happened, the client should be shut down and restarted when the problem has been resolved. This work should be coordinated with the BEA TUXEDO system administrator.

[Top] [Prev] [Next] [Bottom]