[Top] [Prev] [Next] [Bottom]

3. LIBGWT Messages 1200-1299

1200	WARN: Transaction received HEURISTIC MIX result from remote domain val
	Description	The Domain gateway received a heuristic mix message indicating that part of the transaction committed and part of the transaction rolled back. This may cause an inconsistency in the application data.
Action	No action required.
1201	WARN: Transaction received HEURISTIC HAZARD result from remote domain val
	Description	The Domain gateway received a heuristic hazard message indicating that the outcome of part of the transaction is uncertain. This may cause an inconsistency in the application data.
Action	No action required.
1202	*ERROR: Bad message from sub. Closing file descriptor*
	Description	An invalid message was received in the Domain gateway. The gateway connection will be closed.
Action	Ensure that the TYPE values are set correctly if encoding is needed between domains.
1203	ERROR: Memory allocation failure for decompression
	Description	An attempt dynamically to allocate memory from the operating system failed while decompressing a received message.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1204	ERROR: Memory allocation failure for decompression
	Description	An attempt dynamically to allocate memory from the operating system failed while decompressing a received message.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1205	ERROR: Unable to obtain remote domain entry from shmem
	Description	While compressing a message, the entry for the remote domain could not be found (to determine the compression limit).
Action	This error should not occur. Contact BEA TUXEDO system Technical Support.
1206	ERROR: Memory allocation failure for compression
	Description	An attempt dynamically to allocate memory from the operating system failed while compressing a message.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1207	ERROR: Unable to obtain remote domain entry from shmem
	Description	While compressing a message, the entry for the remote domain could not be found (to determine the compression limit).
Action	This error should not occur. Contact BEA TUXEDO system Technical Support.
1208	ERROR: Memory allocation failure for compression
	Description	An attempt dynamically to allocate memory from the operating system failed while compressing a message.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1209	ERROR: Memory allocation failure for decompression
	Description	An attempt dynamically to allocate memory from the operating system failed while decompressing a message.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1210	ERROR: decompression failed
	Description	An error occurred while decompressing a message.
Action	Check for other errors in the event log.
1211	ERROR: Failed to destroy inflate structure
	Description	An error occurred while decompressing a message.
Action	Check for other errors in the event log.
1212	*WARN: Network connection closed by rdom, closing file descriptor*
	Description	The gateway at the remote domain closed the network connection.
Action	No action required.
1213	*WARN: Network connection closed by rdom, closing file descriptor*
	Description	The gateway at the remote domain closed the network connection.
Action	No action required.
1214	WARN: Corrupted Communication Control data detected!
	Description	An error occurred in the information associated with the domain connection.
Action	Contact BEA TUXEDO system Technical Support.
1215	*WARN: Communication to remote domain <rdom> already disconnected*
	Description	A message was sent to a domain that has already disconnected from the local domain.
Action	Re-try the operation.
1216	*WARN: Communication to remote domain <rdom> already disconnected*
	Description	A message was sent to a domain that has already disconnected from the local domain.
Action	Re-try the operation.
1217	ERROR: Decode function failed
	Description	The call to the `buffer`(3c) `_tmencdec` routine to process the buffer of received data has failed. The routine is as defined in the typeswitch which can be defined by the specific BEA TUXEDO application.
Action	Contact your BEA TUXEDO system Technical Support.
See Also	`buffer`(3c)
1218	ERROR: memory allocation failed for compression
	Description	The Domain Gateway library software detected an error while trying to compress a message. The process was unable to allocate enough virtual memory for the operation.
Action	Attempt to identify and stop any extraneous processes to free up virtual memory on your system.
See Also	`tpstrerror`(3c)
1219	ERROR: compression fails...continuing
	Description	The Domain Gateway library software detected an error while trying to compress a message. An internal function call returned a failure.
Action	This is an internal error with no associated user action. If the error persists, contact your BEA TUXEDO system Technical Support with the exact error message.
See Also	`tpstrerror`(3c)
1220	ERROR: memory allocation failure in decompression
	Description	The Domain Gateway library software detected an error while trying to decompress a message. The process was unable to allocate enough virtual memory for the operation.
Action	Attempt to identify and stop any extraneous processes to free up virtual memory on your system.
See Also	`tpstrerror`(3c)
1221	ERROR: decompression of message failed
	Description	The Domain Gateway library software detected an error while trying to decompress a message. An internal function call returned a failure.
Action	This is an internal error with no associated user action. If the error persists, contact your BEA TUXEDO system Technical Support with the exact error message.
See Also	`tpstrerror`(3c)
1222	ERROR: uncompressed message reallocation failed
	Description	The Domain Gateway library software detected an error while trying to decompress a message. The process was unable to allocate enough virtual memory for the operation.
Action	Attempt to identify and stop any extraneous processes to free up virtual memory on your system.
See Also	`tpstrerror`(3c)
1223	*WARN: Reach system open max(maximum) limit*
	Description	The Domain Gateway library software detected an error while trying to get a free file descriptor entry. The BEA TUXEDO System maximum maximum for open files was reached.
Action	Attempt to identify and close any files which are open unnecessarily.
See Also	`tpstrerror`(3c)
1224	*ERROR: Minimum encryption (number of bits) is larger than 0, but the link level package is not installed*
	Description	The Domain Gateway library software detected an error while trying to process a connect operation. The minimum number of encryption bits number of bits specified in the `DM_TDOMAIN` section of the domain configuration file is greater than zero; however, no link level security package is installed.
	Action	Correct the configuration so that the minimum number of encryption bits is consistent with the link level security package in use.
	See Also	`dmconfig`(5)
1225	*ERROR: Minimum encryption (number of bits) is larger than 40, but only the 40-bit package is installed*
	Description	The Domain Gateway library software detected an error while trying to process a connect operation. The minimum number of encryption bits number of bits specified in the `DM_TDOMAIN` section of the domain configuration file is greater than forty; however, the forty-bit link level security package is installed.
Action	Correct the configuration so that the minimum number of encryption bits is consistent with the link level security package in use.
See Also	`dmconfig`(5)
1226	ERROR: Could not allocate encryption handle
	Description	The Domain Gateway library software detected an error while trying to process a connect operation. The encryption handle could not be allocated. An internal function call returned a failure. A more descriptive error messages will be issued by the failing routine.
Action	Check the surrounding error messages for more descriptive error information.
See Also	`tpstrerror`(3c)
1227	ERROR: Could not get encryption settings
	Description	The Domain Gateway library software detected an error while trying to receive a message. The process was unable to obtain from shared memory the *`DM_TDOMAIN` configuration section containing the encryption settings.
Action	This is an internal error with no associated user action. If the error persists, contact your BEA TUXEDO system Technical Support with the exact error message.
See Also	`tpstrerror`(3c)
1228	*ERROR: Minimum encryption (number of bits) is larger than 40, but only the 40-bit package is installed*
	Description	The Domain Gateway library software detected an error while trying to receive a message. The minimum number of encryption bits number of bits specified in the `DM_TDOMAIN` section of the domain configuration file is greater than forty; however, the forty-bit link level security package is installed.
Action	Correct the configuration so that the minimum number of encryption bits is consistent with the link level security package in use.
See Also	`dmconfig`(5)
1229	ERROR: Encryption negotiation failure
	Description	The Domain Gateway library software detected an error while trying to receive a message. An error was detected in the encryption flag settings. The encryption flags are all zero.
Action	Ensure that the encryption bit settings in the `DM_TDOMAIN` sections of the `dmconfig` file are consistent for communicating domains.
See Also	`dmconfig`(5)
1230	ERROR: Unable to generate first diffie-hellman packet
	Description	The Domain Gateway library software detected an error while trying to send a message. An internal function call for encryption returned a failure. Additional error messages from the failing routine will be issued prior to this message.
Action	Check the messages from the failing routine for more specific information regarding the cause of this error.
See Also	`tpstrerror`(3c)
1231	ERROR: Could not allocate encryption handle
	Description	The Domain Gateway library software detected an error while trying to receive a message. An error was detected in the internal routine to allocate an encryption handle. A more specific message will be issued by the failing routine.
Action	Check the surrounding error messages for additional information.
See Also	`tpstrerror`(3c)
1232	ERROR: Memory allocation error
	Description	The Domain Gateway library software detected an error while trying to receive a message. The process was unable to allocate enough virtual memory for the operation.
Action	Attempt to identify and stop any extraneous processes to free up virtual memory on your system.
See Also	`tpstrerror`(3c)
1233	ERROR: Unable to generate second diffie-hellman packet
	Description	The Domain Gateway library software detected an error while trying to send a message. An internal function call for encryption returned a failure. Additional error messages from the failing routine will be issued prior to this message.
Action	Check the messages from the failing routine for more specific information regarding the cause of this error.
See Also	`tpstrerror`(3c)
1234	ERROR: Unexpected link level encryption failure
	Description	The Domain Gateway library software detected an error while trying to send a message. An internal function call for encryption returned a failure.
Action	This is an internal error with no associated user action. If the error persists, contact your BEA TUXEDO System technical support with the exact error message.
See Also	`tpstrerror`(3c)
1236	ERROR: Encryption negotiation failure
	Description	The Domain Gateway library software detected an error while trying to receive a message. An error was detected in the encryption flag settings. The encryption flags are all zero.
Action	Ensure that the encryption bit settings in the `DM_TDOMAIN` sections of the `dmconfig` file are consistent for communicating domains.
See Also	`dmconfig`(5)
1237	ERROR: Invalid security level
	Description	The Domain Gateway library software detected an error while trying to receive a message. An invalid encryption level was detected.
Action	This is an internal error with no associated user action. If the error persists, contact your BEA TUXEDO System technical support with the exact error message.
See Also	`tpstrerror`(3c)
1238	ERROR: Unexpected link level encryption failure
	Description	The Domain Gateway library software detected an error while trying to receive a message. An internal function call for encryption returned a failure.
Action	This is an internal error with no associated user action. If the error persists, contact your BEA TUXEDO System technical support with the exact error message.
See Also	`tpstrerror`(3c)
1240	*ERROR: Minimum encryption (number of bits) is larger than 0, but the link level package is not installed*
	Description	The Domain Gateway library software detected an error while trying to process a receive operation. The minimum number of encryption bits number of bits specified in the `DM_TDOMAIN` section of the domain configuration file is greater than zero; however, no link level security package is installed.
Action	Correct the configuration so that the minimum number of encryption bits is consistent with the link level security package in use.
See Also	`dmconfig`(5)
1241	ERROR: Invalid parameter, tdom_link is NULL
	Description	GWTDOMAIN detects an internal error, or possible data corruption when it does a network open call.
Action	Contact your BEA TUXEDO system Technical Support.
1242	ERROR: Invalid parameter, tdom_link contains NULL pointer
	Description	GWTDOMAIN detects an internal error, or possible data corruption when it does a network open call.
Action	Contact your BEA TUXEDO system Technical Support.
1243	*WARN: Open domain_name* address ip_port failed, Network error(0xerror_code)**
	Description	`GWTDOMAIN` tries to open a listening end point form domain domain_name using the port number and IP address as specified by ip_address failed with network error code specified. This can be caused by either the port is already been used, or the port just been release in some TCP/IP implementation.
Action	If the configuration contains multiple address entries for the specified domain, the `GWTDOMAIN` will continue with the next one. If all the address specified exhausted and still can't open the listening end point, `GWTDOMAIN` will exit. The user can try to restart it, or change configuration and restart it.
1244	WARN: No more NW address to try
	Description	`GWTDOMAIN` already tries all the listening end points specified in the `BDMCONFIG` file, and still could not able to open any listening end point.
Action	The administrator should check whether the configuration is correct, and whether any other process already uses the port number.
1245	WARN: Try next one, device device_name address ip_address
	Description	This is informational. It tells the user that `GWTDOMAIN` is going to try the next IP address and port number specified in the configuration.
Action	Nothing.
1246	ERROR: Invalid parameter, tdom_link is NULL
	Description	`GWTDOMAIN` detects an internal error, or possible data corruption when it does a network connect call.
Action	Contact your BEA TUXEDO system Technical Support.
1247	ERROR: Invalid parameter, tdom_link contains NULL pointer
	Description	`GWTDOMAIN` detects an internal error, or possible data corruption when it does a network connect call.
Action	Contact your BEA TUXEDO system Technical Support.
1248	ERROR: Invalid parameter, fd is -1
	Description	`GWTDOMAIN` detects an internal error, or possible data corruption when it does a network connect call.
Action	Contact your BEA TUXEDO system Technical Support.
1249	*WARN: Connect to domain_name* address ip_addr failed, Network error(0xerrno)**
	Description	`GWTDOMAIN` tries to connect to a remote domain domain_name using the port number and IP address as specified by ip_address failed with network error code specified. This can be caused by network failure, wrong IP address or port number in the configuration, or the remote `GWTDOMAIN` not yet up and running, or the remote `GWTDOMAIN` has not yet able to open the listening end, or the remote `GWTDOMAIN` opened different end point then what specified in the local domain configuration file.
Action	Check the network, and check proper configuration. And also make sure the remote domain `GWTDOMAIN` is up and running and use the port and IP address specified in the configuration.
1250	WARN: No more remote domain NW address to try
	Description	`GWTDOMAIN` has exhausted all the address information specified in the configuration file, and still could not connect to remote `GWTDOMAIN`.
Action	Check the network, and check proper configuration. And also make sure the remote domain `GWTDOMAIN` is up and running and use the port and IP address specified in the configuration.
1251	WARN: Try next one, address ip_address
	Description	This is informational. It tells the user that `GWTDOMAIN` is going to try the next IP address and port number specified in the configuration to connect to remote `GWTDOMAIN`.
Action	No action required.
1252	ERROR: Unable to obtain transaction entry from shared memory (rollback)
	Description	The /Domain transaction table entry for this transaction was not found in the /Domain shared memory tables when trying to process a transaction rollback. This could be caused if a stray message was received for a transaction that was already aborted.
Action	If the `dmadmin` subcommand `pt` indicates that the transaction has already been removed from the /Domain shared memory, no action is required. Otherwise, contact your BEA TUXEDO system Technical Support.
1253	*ERROR: Unable to open device "sub"; network error code 0xsub*
	Description	The `GWTDOMAIN` process was unable to establish a connection to the remote domain using device <device name>. The error code <hex value> was returned from the network open routine.
Action	Ensure that the values specified for the `NWADDR` and `NWDEVICE` parameters in the `DM_TDOMAIN` section of the `dmconfig`(5) file are correct.
See Also	`dmconfig`(5)
1254	ERROR: Unable to determine locality of transaction
	Description	The `GWTDOMAIN` process was unable to determine the locality (local or remote) of a transaction. This is an internal processing error.
Action	This is an internal error with no associated user action.
See Also	`tperrno`(5)
1255	WARN: Unable to create local txid in shared memory for transaction recovery
	Description	The `GWTDOMAIN` process was unable to recover a transaction because the transaction table is full. The transaction will be rolled back.
Action	Modify the configuration to allow for more concurrent transactions.
1256	WARN: Unable to create local txid in shared memory for transaction recovery
	Description	The `GWTDOMAIN` process was unable to recover a transaction because the transaction table is full. The transaction will be rolled back.
Action	Modify the configuration to allow for more concurrent transactions.

[Top] [Prev] [Next] [Bottom]