[Top] [Prev] [Next] [Bottom]

1. LIBGW Messages 1000-1099

1000	ERROR: Message dropped by gw_msg_recv(). Error = error_code
	Description	The Domains gateway process received an input message that it was unable to process. The error_code reported is for use by your BEA TUXEDO system Technical Support.
Action	The userlog will normally contain another related userlog message explaining the cause of the error in more detail. If no other message is present, contact your BEA TUXEDO system Technical Support.
1001	ERROR: Received message with an unknown internal type index index_number
	Description	While processing a reply, the internal buffer type is unknown. This refers to an internal system problem that could be caused, for example, by corrupted shared memory.
Action	Contact your BEA TUXEDO system Technical Support.
1002	*ERROR: Received message of unknown type 'type_name' subtype 'subtype_name'*
	Description	The Domains gateway received a message whose type and subtype are not known. That is, the gateway's type switch was not built to recognize the type and/or subtype of the message received. This may happen if the administrator has defined a new application specific type as described in `tuxtypes`(5) and has rebuilt some clients and/or servers with the new typeswitch, but has forgotten to rebuild other clients and/or servers with the new typeswitch.
Action	The Domains gateway process should be re-linked with the appropriate type switch including the type and subtype that are printed as part of this error message. Or, the process sending the offending type/subtype should be altered to send a buffer that the gateway understands.
See Also	`tuxtypes`(5), `ubbconfig`(5)
1003	*ERROR: Received message of unknown type 'type_name'*
	Description	The Domains gateway received a message whose type is not known. That is, the gateway's type switch was not built to recognize the type of the message received. This may happen if the administrator has defined a new application specific type as described in `tuxtypes`(5) and has rebuilt some clients and/or servers with the new typeswitch, but has forgotten to rebuild other clients and/or servers with the new typeswitch.
Action	The Domains gateway process should be re-linked with the appropriate type switch including the type that is printed as part of this error message. Or, the process sending the offending type should be altered to send a buffer that the gateway understands.
See Also	`tuxtypes`(5), `ubbconfig`(5)
1008	ERROR: shmat() system call failure: errno = errno
	Description	One of the Domains system-supplied processes was unable to attach to a shared memory segment. The value of errno returned from the UNIX `shmat`(2) system call is also printed. This could happen if one or more shared memory segments were manually removed by a privileged UNIX user.
Action	If the value of errno indicates that the shared memory segment in question does not exist, it will be necessary to shut down the gateway group and reboot it.
1009	ERROR: Memory allocation failure, size size
	Description	An attempt to dynamically allocate memory from the operating system using `malloc` failed while attempting to create and initialize the Domains semaphore structures.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1010	ERROR: Reached UNIX limit on semaphore ids
	Description	The `GWADM` server could not create any more semaphore ids because the UNIX system-imposed limit on the maximum number of allowed semaphores system-wide would be exceeded.
Action	Use the `tmloadcf -c` and `dmloadcf -c` commands to determine the machine IPC resources required by the core BEA TUXEDO system and by the Domains feature. Add to these values the IPC resources used by any resource managers and/or other applications, and reconfigure the system IPC resources appropriately. Refer to the IPC tuning guidelines in the BEA TUXEDO Installation Guide for further information.
See Also	`tmloadcf`(1), `dmloadcf`(1), BEA TUXEDO Installation Guide
1011	ERROR: Can't create enough semaphores for GW
	Description	When a Domains gateway group initializes, it creates one or more sets of semaphores for serializing access to the Domains shared memory. The number of semaphores created per gateway group is equal to the number of server processes configured for that gateway group, plus 1. This message is printed when the Domains gateway group cannot create as many semaphores as it needs.
Action	Since the core BEA TUXEDO system normally makes use of many more semaphores than the Domains add-on, attempts to reduce semaphore usage should focus on core BEA TUXEDO. If possible, decrease the value of `MAXACCESSERS` in the UBBCONFIG file to reduce core BEA TUXEDO system semaphore usage. If the `MAX` value for any Domains server is set to a large value, reduce this value in order to reduce the number of Domains semaphores used. If it is not possible to reduce semaphore usage for the existing application, the `tmconfig -c` and commands can be run to determine the number of semaphores required by core BEA TUXEDO and by the Domains add-on. Refer to the BEA TUXEDO Installation Guide for further information regarding IPC parameters.
See Also	BEA TUXEDO Installation Guide, `tmloadcf`(1), `dmloadcf`(1)
1012	ERROR: Reached UNIX limit on semaphore ids
	Description	See message 1010.
Action	See message 1010.
1013	ERROR: Can't create enough semaphores for GW
	Description	See message 1011.
Action	See message 1011.
1014	ERROR: semctl for initializing sems failed, errno=errno_value
	Description	Once the `GWADM` process creates a semaphore set used for serializing access to the Domains shared memory, it initializes it. This message is issued when the `GWADM` server fails to initialize a semaphore set as locked. The issued message contains the UNIX error number, errno, which can be used to determine the exact nature of the error.
Action	Contact your BEA TUXEDO system Technical Support.
See Also	`semctl`(2) in UNIX reference manuals
1015	ERROR: semctl for initializing sems failed, errno=errno_value
	Description	Once the `GWADM` process creates a semaphore set used for serializing access to the Domains shared memory, it initializes it. This message is issued when the `GWADM` server fails to initialize a semaphore set with the administrator's UNIX uid, gid, and permissions as specified in the `dmconfig` file. The issued message contains the UNIX error number, errno, which can be used to determine the exact nature of the error.
Action	Contact your BEA TUXEDO system Technical Support.
See Also	`semctl`(2) in UNIX reference manuals
1019	ERROR: Gateway internal data structures not set
	Description	While attempting to lock shared memory, a Domains system server noticed that a pointer which should always point to information about the Domains process was set to NULL. This is an internal problem.
Action	Contact your BEA TUXEDO system Technical Support.
1020	ERROR: Can't lock gateway shared memory
	Description	A process was unable to lock the shared memory data structures.
Action	Contact your BEA TUXEDO system Technical Support.
1021	ERROR: Can't unlock gateway shared memory
	Description	The process was unable to successfully unlock the shared memory data structures. As a result of this problem, other processes will be unable to lock the shared memory data structures. The most common cause of this error is the accidental removal of some or all of the semaphore sets.
Action	Ask the privileged users on your system (normally the BEA TUXEDO administrator and root) whether they may have accidentally removed some IPC resource, perhaps through inadvertent use of the UNIX System `ipcrm`(1) command. If no IPC resources have been accidentally removed, contact your BEA TUXEDO system Technical Support.
1022	ERROR: Can't unlock gateway shared memory, not the locker
	Description	The process attempted to unlock the shared memory data structures, but it was not the locker of these structures. Because of this, no change was made to the status of the shared memory data structures.
Action	Contact your BEA TUXEDO system Technical Support.
1024	ERROR: Wakeup failure for sem semno, errno errno_val
	Description	A `semop`(2) system call failed for one of the semaphores that control access to data structures. The semno refers to the index of the semaphore within a particular set; this information may be useful to support technicians. errno_val refers to the UNIX System error returned by the `semop`(2) system call. This value can be very helpful to application administrators in diagnosing the cause of the problem.
Action	Refer to the UNIX System `intro`(2) and `semop`(2) manual pages to translate the numeric value of errno into a symbolic value and determine the possible causes of such an error. For example, errno values of 22 (`EINVAL`) or 36 (`EIDRM`) indicate that a privileged user may accidentally have removed the semaphores, perhaps through use of the UNIX System `ipcrm`(1) command. If the problem cannot be resolved, contact your BEA TUXEDO system Technical Support.
See Also	`intro`(2), `semop`(2) in UNIX reference manuals
1025	ERROR: Awaitwkup failure for sem semno, errno errno_val
	Description	A `semop`(2) system call failed for one of the semaphores that control access to data structures. The semno refers to the index of the semaphore within a particular set; this information may be useful to support technicians. errno_val refers to the UNIX System error returned by the `semop`(2) system call. This value can be very helpful to application administrators in diagnosing the cause of the problem.
Action	Refer to the UNIX System `intro`(2) and `semop`(2) manual pages to translate the numeric value of errno into a symbolic value and determine the possible causes of such an error. For example, errno values of 22 (`EINVAL`) or 36 (`EIDRM`) indicate that a privileged user may accidentally have removed the semaphores, perhaps through use of the UNIX System `ipcrm`(1) command. If the problem cannot be resolved, contact your BEA TUXEDO system Technical Support.
See Also	`intro`(2), `semop`(2) in UNIX reference manuals
1026	WARN: GWDBG contains non-numeric characters in first number
	Description	The format of the `GWDBG` variable is invalid. The allowable formats for `GWDBG` are: number number:regular_expression number1-number2 number1-number2:regular_expression If number is specified, debugging messages with levels less than or equal to number will be printed. If number1 and number2 are specified, debugging messages with levels between number1 and number2, inclusive, will be printed. If a regular expression is appended to the numeric part of the argument, only those messages matching that regular expression will be printed.
Action	Make sure the format of the `GWDBG` variable is valid. `GWDBG` may be incorrectly set and exported in the environment. It may also be incorrectly set in an environment file using the `ENVFILE` parameter in the MACHINES or SERVERS section of the UBBCONFIG file.
1027	WARN: GWDBG contains non-numeric characters in 2nd part of range
	Description	The format of the GWDBG variable is invalid. The allowable formats for GWDBG are: number number:regular_expression number1-number2 number1-number2:regular_expression If `number` is specified, debugging messages with levels less than or equal to `number` will be printed. If `number1` and `number2` are specified, debugging messages with levels between `number1` and `number2`, inclusive, will be printed. If a `regular expression` is appended to the numeric part of the argument, only those messages matching that `regular expression` will be printed.
Action	Make sure the format of the GWDBG variable is valid. GWDBG may be incorrectly set and exported in the environment. It may also be incorrectly set in an environment file using the ENVFILE parameter in the MACHINES or SERVERS section of the UBBCONFIG file.
See Also	`ubbconfig`(5)
1028	WARN: GWDBG regular expression invalid. Ignoring regular expression.
	Description	The format of the `GWDBG` variable is invalid. The allowable formats for `GWDBG` are: numbernumber:regular_expressionnumber1-number2number1-number2:regular_expression If `number` is specified, debugging messages with levels less than or equal to `number` will be printed. If `number1` and `number2` are specified, debugging messages with levels between `number1` and `number2`, inclusive, will be printed. If a `regular expression` is appended to the numeric part of the argument, only those messages matching that `regular expression` will be printed.
Action	Make sure the format of the `GWDBG` variable is valid. `GWDBG` may be incorrectly set and exported in the environment. It may also be incorrectly set in an environment file using the `ENVFILE` parameter in the MACHINES or SERVERS section of the UBBCONFIG file.
See Also	`ubbconfig`(5)
1029	*ERROR: Service request not forwarded to remote site: "error_string" gwerrno(val)*
	Description	The Domains gateway server attempted to execute a service request received from another Domains gateway. However, the invocation of `tpacall`(3c) on the remote domain failed. A string indicating the specific error is printed as part of the message, and will be returned to the process that invoked this service request across the gateway.
Action	Look at the specific error string reported by `tpacall`(3c) to narrow down the cause of the error. Make certain that the service requested is advertised by one or more application servers, that its input buffer type is specified correctly, and that the application server supports transactions if the call was made in transaction mode.
See Also	`tpacall`(3c)
1030	ERROR: Reply message not sent due to gateway error error_code
	Description	A Domains gateway server was unable to send a reply message to a BEA TUXEDO process. In many cases, another related userlog message will give further details as to the cause of the error. The error_code may help support personnel further distinguish the cause of the error.
Action	Look for another related userlog message explaining the cause of the error in greater detail. If no other message is present, contact your BEA TUXEDO system Technical Support.
1031	ERROR: Domain administrative service GWA not advertised
	Description	When a Domains gateway server is booted, it checks to see if an instance of the `GWADM` server is executing within the same group by verifying that a service named `GWA` is offered within the same group. If no `GWA` service is offered, the Domains gateway server logs this message and exits.
Action	Make certain that the `dmconfig`(5) file specifies the `GWADM` server as present in each group where there are Domains gateway servers. Make certain that the `dmconfig`(5) file specifies that the `GWADM` server is to be booted prior to any Domains gateway servers within the same group. If using options to tmboot to explicitly control the servers booted, do not attempt to boot Domains gateway servers unless there is a `GWADM` server booted within the same group. Finally, make sure that the `GWADM` server has not abnormally died or failed to boot.
See Also	`dmconfig`(5)
1032	*ERROR: Failed to update own server table entry with /T error (error_string)*
	Description	A Domains process failed in an attempt to update its own server table entry in the Bulletin Board.
Action	Check that the shared memory segment that contains the Bulletin Board has not been removed. If it has, then the application will need to be rebooted. Otherwise, this error indicates an internal error. In this case, contact your BEA TUXEDO system Technical Support.
See Also	`tperrno`(5)
1033	ERROR: Cannot allocate memory to retrieve service table entries
	Description	An attempt to dynamically allocate memory from the operating system using `malloc` failed while attempting to retrieve the list of services offered within this gateway group.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1035	*ERROR: Cannot retrieve GWADM server table entry due to /T error (error_string)*
	Description	A Domains gateway server or a restarting `GWADM` process is unable to retrieve the server table entry associated with the `GWADM` server. A string describing the value of tperrno associated with the failure is printed as part of the message.
Action	If this message is reported by a Domains gateway process, make certain that the `GWADM` server is in fact executing in the Domains gateway server group. If this message is reported in a different context, contact your BEA TUXEDO system Technical Support.
1036	ERROR: Can't locate free block in domain log
	Description	The Domains software was unable to locate a suitably large block of space in the Domains log to log a particular transaction. This will result in the transaction being unable to commit.
Action	If any records for heuristically completed transactions exist in the Domains log, these records will remain until explicitly removed by an administrator. The dmadmin printtrans and forgettrans commands can be used to remove any heuristic log records that are no longer required. Also, consider increasing the size of the Domains transaction log file. This can be done when the Domains gateway group is next taken down for maintenance using the dmadmin dsdmlog command and either the dmadmin config command or the dmloadcf command.
See Also	`dmadmin`(1), `dmloadcf`(1)
1037	ERROR: gwlog_eot(): wrong page numbers start_page/end_page
	Description	An internal request to free certain page(s) in the Domains log requested the freeing of a page range where the start page was greater than the end page, the start page was negative, or the end page reached beyond the end of the log. This indicates a problem with the Domains internal data structures.
Action	Contact your BEA TUXEDO system Technical Support.
1038	*INFO: Domain log page pageno* skipped, chksum didn't match**
	Description	While reading in the Domains log to perform warmstart, a record was detected with a valid magic value but an invalid checksum. This can happen if there was a system crash after a part of the log record had been written to disk. This log record will not be considered when forming the list of transactions to be recommitted by warmstart. Domains will maintain transaction integrity by rolling the transaction back.
Action	No action required.
1039	ERROR: Domain log not in an understandable format. Different release.
	Description	While reading in the Domains log as part of warmstart, the Domains software detected a record whose format indicates that it comes from a different major release of Domains whose format is not known to this release. The record cannot be processed.
Action	If there is more than one release of the BEA TUXEDO system available on this machine, make sure that you are running the proper release. Also, refer to the installation notes for this release of Domains to determine the proper steps to follow when upgrading from a previous release.
1040	*ERROR: System clock has been reset to prior time. Reset again to time after time.*
	Description	The system clock has been reset such that the current time precedes the timestamps in the Domains transaction log. Since this could cause inconsistencies when previous transactions are warmstarted, the boot of the Domains gateway group is not allowed.
Action	Reset the system clock to the correct time, and retry the operation again.
1041	ERROR: Can't get domain log information for warmstart
	Description	A Domains system processes was unable to obtain basic information about its local domain that is needed to properly warmstart the Domains gateway group. For this reason, the boot of the Domains gateway group will fail.
Action	Contact your BEA TUXEDO system Technical Support.
1042	ERROR: Can't open domain log
	Description	The process was unable to open the Domains transaction log device. Another userlog message will normally provide further details as to the cause of the error.
Action	Make certain that the device listed in the `DMTLOGDEV` parameter in the Domains configuration file exists, and that it can be read by the user ID under which the Domains processes are running. Use the tmadmin livtoc command to verify that a table whose name is given by the `DMTLOGNAME` parameter in the Domains configuration file exists. If no such table exists, determine whether there is sufficient free space to create such a table. Examine immediately preceding messages in the userlog to determine a more specific cause of the error.
See Also	`tmadmin`(1), `dmconfig`(5)
1046	ERROR: Can't release domain shared memory lock
	Description	The Domains gateway process is unable to release a lock on the Domains shared data structures. As a result, other processes within the Domains gateway group will be unable to access the Domains shared data structures.
Action	Shut down the Domains gateway group and then restart it. Contact your BEA TUXEDO system Technical Support.
1047	ERROR: Found invalid TMS event 0xevent_number
	Description	A common function within the Domains gateway that is used to send several different types of events to other TMS processes was invoked with an event that it does not know about. This is an internal error.
Action	Contact your BEA TUXEDO system Technical Support.
1048	*ERROR: Cannot send to service "TMS" due to error "error_string"*
	Description	The Domains gateway was managing a transaction and had attempted to send a message to a TMS service via a `tpacall`(), and that call failed. The string value displayed in the message identifies the value of tperrno returned by `tpacall`().
Action	A possible cause for this error may be that the TMS process has terminated for some reason. Please check and ensure that all TMS processes are running. If further assistance is needed, contact the BEA TUXEDO system Administrator.
1049	ERROR: TMS_ABORTONLY transaction state state
	Description	The Domains gateway process was rolling back a transaction. The transaction state was not as expected.
Action	Contact your BEA TUXEDO system Technical Support.
1050	ERROR: TMS_MANAGE found transaction state stateval
	Description	While attempting to send a first phase commit request to other participating groups in a transaction, the Domains gateway process found a transaction state it did not expect.
Action	Contact your BEA TUXEDO system Technical Support.
1051	ERROR: TMS_MANAGE found transaction state stateval
	Description	While attempting to send a second phase commit message to other participating groups in a transaction, the Domains gateway process found a transaction state it did not expect.
Action	Contact your BEA TUXEDO system Technical Support.
1052	ERROR: TMS_MANAGE found transaction state stateval
	Description	While attempting to send an abort message to other participating groups in a transaction, the Domains gateway process found a transaction state it did not expect.
Action	Contact your BEA TUXEDO system Technical Support.
1053	ERROR: TMS_TIMEOUT state state
	Description	While attempting to process a request to time out a transaction received from the BEA TUXEDO BBL, the Domains gateway process found an unexpected transaction state.
Action	Contact your BEA TUXEDO system Technical Support.
1054	ERROR: Received TMS_ABORT for TMGDECIDED transaction
	Description	The Domains gateway received a rollback request for a transaction. However, the Bulletin Board data structures indicate that the transaction is in a state that can only occur if the decision was to commit the transaction.
Action	Contact your BEA TUXEDO system Technical Support.
1055	ERROR: Group group at coordinator site received TMS_ABORT in state TMGREADY
	Description	The Domains gateway, acting as coordinator of a BEA TUXEDO transaction, received a request to rollback a transaction that is already in "ready" state. Since only the coordinator itself can make the decision to abort such a transaction, this is an internal error.
Action	Contact your BEA TUXEDO system Technical Support.
1056	WARN: TMS_ABORT changing group group from TMGHCOMMIT to TMGABORTED
	Description	An administrator had made a previous decision to heuristically commit a transaction at this group. Subsequently, it was learned that the coordinator had decided to abort the transaction. This message logs the inconsistency.
Action	No action is required. However, the administrator may want to take application-specific steps to manually remedy any inconsistency caused by the incorrect heuristic decision.
1057	ERROR: tms_abort group group in state state
	Description	While rolling back a transaction, the Domains gateway found the transaction state of group group to not be one of the expected states for a transaction being rolled back.
Action	Contact your BEA TUXEDO system Technical Support.
1058	WARN: aborttrans all aborted transaction
	Description	The Domains gateway received a request to heuristically rollback a global transaction. This request was generated via the `tmadmin` `aborttrans` command.
Action	No action required.
1059	WARN: committrans committed group group
	Description	This message informs that a transaction has been heuristically committed at this group as a result of a `tmadmin committrans` command.
Action	No action required.
1060	ERROR: Can't get domain shared memory lock
	Description	While attempting to place a transaction on the list of items to be logged, the Domains gateway was unable to log the Domains shared memory data structures. As a result, the transaction cannot be logged at this time. This will result in the transaction being aborted or remaining in an indeterminate state.
Action	Contact your BEA TUXEDO system Technical Support.
1061	ERROR: Failed to set non-blocking priority for TMS request
	Description	While attempting to send a TMS message, a Domains gateway process was unable to increase the priority of a non-blocking request. By itself, this failure will not result in any incorrect operation other than a possible minor performance degradation. However, it may be symptomatic of problems elsewhere in the system, since this call should not normally fail.
Action	Contact your BEA TUXEDO system Technical Support.
1062	ERROR: TMS_COMMIT found transaction state state
	Description	While attempting to process a transaction commit request, the Domains gateway found an unexpected transaction state in the BEA TUXEDO transaction table.
Action	Contact your BEA TUXEDO system Technical Support.
1063	*ERROR: Cannot start AUTOTRAN transaction due to error "error_string"*
	Description	The domain gateway attempted to initiate a transaction because of the `AUTOTRAN` option on a service request it received. However, the call to `tpbegin`(3c) failed. The error string associated with the value of tperrno returned by `tpbegin`(3c) is printed as part of the error message.
Action	Look at the list of tperrno values on the `tpbegin`(3c) manual page to attempt to narrow down the cause of the error. Also look for any immediately preceding messages in the userlog. For example, a preceding message about "No space in Bulletin Board" would indicate that the global transaction table was full. In this case, the size of the transaction table should be increased by the administrator. If the cause of the error cannot otherwise be determined, contact your BEA TUXEDO system Technical Support.
See Also	`tpbegin`(3c)
1066	ERROR: gw_tms_status found transaction state tran_state
	Description	While processing a transaction status message received from a TMS process or from the BBL, the Domains gateway process detected that the transaction was in an unexpected state.
Action	Contact your BEA TUXEDO system Technical Support.
1067	ERROR: Cannot find transaction for action action_name
	Description	The Domains gateway generated an action to send a transaction-related message to a TMS process. However, the transaction specified by the action was not found in the system at the time when the action was executed.
Action	Contact your BEA TUXEDO system Technical Support.
1068	WARN: Cannot free unrecognized internal buffer at address 0xaddress
	Description	A Domains gateway process attempted to free what it thought was a BEA TUXEDO system buffer. However, the buffer did not have the proper BEA TUXEDO magic value or was a NULL pointer, so it was not freed.
Action	Since the bad buffer was not freed, no action is required. However, you may want to contact your BEA TUXEDO system Technical Support to report that this has occurred.
1069	ERROR: Memory allocation failure
	Description	An attempt to dynamically allocate memory from the operating system using `malloc` failed while attempting to log a transaction. For the most common types of log records, this will result in the transaction being aborted.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1070	ERROR: Memory allocation failure
	Description	An attempt to dynamically allocate memory from the operating system using `malloc` failed while attempting to warmstart the Domains gateway group.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1071	ERROR: gw_tms_ready for missing group group
	Description	While committing a transaction, the Domains gateway received a ready indication for a group that is not part of the transaction. The transaction will be marked as abort-only.
Action	Contact your BEA TUXEDO system Technical Support.
1072	ERROR: gw_tms_ready group group state state
	Description	While committing a transaction, the Domains gateway found that one of the groups for the transaction is in an unexpected state.
Action	Contact your BEA TUXEDO system Technical Support.
1073	ERROR: gw_tms_ready found transaction state state
	Description	While attempting to commit a transaction, the Domains gateway found an unexpected transaction state. Because of this, the transaction is being marked abort-only.
Action	Contact your BEA TUXEDO system Technical Support.
1074	ERROR: Service request found state state for group group
	Description	A Domains gateway process received a service request in transaction mode, but the state of the Domains gateway group was neither active nor aborted. Due to this unexpected state, the service request is not allowed.
Action	Contact your BEA TUXEDO system Technical Support.
1075	ERROR: TMS_DONE transaction state state
	Description	The Domains gateway was finishing the final phase of transaction commit, and found that the transaction state was not as expected.
Action	Contact your BEA TUXEDO system Technical Support.
1076	WARN: aborttrans aborted transaction
	Description	The Domains gateway received a request to heuristically rollback a group of a global transaction. This request was generated via the `tmadmin aborttrans` command.
Action	No action required.
1077	WARN: aborttrans not allowed for TMGDECIDED transaction
	Description	The Domains gateway received a request to heuristically rollback a transaction that is already in decided state. This is not allowed, since the decision has already been made that such a transaction is to be committed. The request was generated via the tmadmin aborttrans command.
Action	No action required.
1078	WARN: aborttrans not allowed for TMGREADY transaction at coordinator site
	Description	The Domains gateway received a request to heuristically rollback a transaction. This Domains group is the coordinator of the transaction, and all groups have reported that they are ready. At this point, the transaction may be waiting for its request to write commit in the transaction log to be completed. For this reason, the request to heuristically rollback the transaction is not allowed, and will be ignored. The request was generated by the tmadmin aborttrans command.
Action	No action required.
1079	WARN: aborttrans aborted group group_name
	Description	This message informs that a transaction has been heuristically committed at group group_name as a result of a tmadmin committrans command.
Action	No action required.
1080	ERROR: Conversational request not forwarded to remote site - tperrno_string
	Description	A `tpsend`(3c) or `tpdiscon`(3c) call was issued by a program on another domain. This call was for a conversation with a server located on this domain. However, when the Domains gateway attempted to execute the `tpsend`(3c) or `tpdiscon`(3c) on this domain on behalf of the original issuer, an error resulted. The value of tperrno is printed as part of the message.
Action	Refer to the manual pages for `tpsend`(3c) and `tpdiscon`(3c) for possible causes of the error. If necessary, correct the application so that the error does not reoccur.
See Also	`tpsend`(3c), `tpdiscon`(3c)
1081	ERROR: Conversation error TPEEVENT but event flag not set
	Description	A Domains gateway process received a conversational message from another BEA TUXEDO process. The message header contained a tperrno value of TPEEVENT, but the message header did not contain any event. This does not conform to the expected protocol.
Action	Contact your BEA TUXEDO system Technical Support.
1082	ERROR: Bad conversation event: number
	Description	A Domains gateway process received a conversational message from another BEA TUXEDO process. The tperrno value in the message was set to `TPEEVENT`, but the event reported was a value that is not known to the system. However, the event field was set to an event value that is not known.
Action	Contact your BEA TUXEDO system Technical Support.
1083	ERROR: Conversational connect not forwarded to remote site - tperrno_string
	Description	A `tpconnect`(3c) was issued by a program on another domain to initiate a conversation with a server on this domain. However, when the Domains gateway attempted to perform the functionality of `tpsend`(3c) on this domain on behalf of the original issuer, an error resulted. The value of tperrno is printed as part of the message.
Action	Refer to the manual page for `tpconnect`(3c) for possible causes of the error. If necessary, correct the application so that the error does not reoccur.
See Also	`tpconnect`(3c)
1084	ERROR: Failed to create connection
	Description	This error occurs when a Domains gateway process executes `tpconnect`(3c) on behalf of a client on a remote domain and fails to add a connection table entry into the Bulletin Board. This can happen if the Bulletin Board connection table is full.
Action	Increase the number of connection table entries in the Bulletin Board by increasing the MAXCONV parameter in the UBBCONFIG file.
See Also	`ubbconfig`(5)
1085	ERROR: Failed to get acknowledgement message for connection - tperrno_string
	Description	This error could occur when a conversational client or server on another domain issues a tpconnect(3c) with `TPSENDONLY` to a service located on this domain. Within each BEA TUXEDO domain, the tpconnect(3c) request with `TPSENDONLY` requires an internal acknowledgment message to be sent. The internal acknowledgment sent from the application server on this domain to the Domains gateway indicated a failure. The value of tperrno associated with the failure is included as part of the message. The next call made on the conversation will result in an immediate disconnect notification.
Action	Look at the `tpconnect`(3c) manual page to see under what circumstances the specific value of tperrno reported can occur. (For example, a tperrno value of `TPEITYPE` would indicate that the data type passed to tpconnect(3c) is not acceptable to the service invoked.) If the error reported is `TPESYSTEM`, contact your BEA TUXEDO system Technical Support.
See Also	`tpconnect`(3c)
1086	INFO: Transaction marked abort-only upon gateway restart
	Description	A Domains gateway process died and was restarted by the BEA TUXEDO system. As a result, transactions that the dead gateway was involved in that had not yet entered the commit phase were marked as abort-only. The transaction indicated in this message had an active action associated with it in the dead gateway, and was marked abort-only.
Action	No action required.
1087	INFO: Warmstart processing transaction as coordinating domain
	Description	A Domains gateway group was previously shut down while transactions were active, or the group previously was terminated abnormally (that is, by a machine crash) regardless of whether transactions were active. Upon restart, the Domains gateway has examined its log and found that this transaction may need to be pushed through to commit. This domain gateway group is the root of the transaction tree. Domains will take care of recommitting the transaction; no administrator action is required.
Action	No action required.
1088	INFO: Warmstart processing transaction as subordinate to domain domain_name
	Description	A Domains gateway group was previously shut down while transactions were active, or the group previously was terminated abnormally (that is, by a machine crash) regardless of whether transactions were active. Upon restart, the Domains gateway has examined its log and found that the commitment or rollback actions for this transaction may not have been completed. This domain gateway group is a subordinate of domain domain_name in the transaction tree. Domains will contact the transaction coordinator and will take care of committing or rolling back the transaction; no administrator action is required.
Action	No action required.
1089	INFO: Warmstart processing transaction as subordinate to group group_name
	Description	A Domains gateway group was previously shut down while transactions were active, or the group previously was terminated abnormally (that is, by a machine crash) regardless of whether transactions were active. Upon restart, the Domains gateway has examined its log and found that the commitment or rollback actions for this transaction may not have been completed. This domain gateway group is a subordinate of local group group_name in the transaction tree. Domains will contact the transaction coordinator and will take care of committing or rolling back the transaction; no administrator action is required.
Action	No action required.
1090	ERROR: Memory allocation failure, size size
	Description	An attempt to dynamically allocate memory from the operating system using `malloc` failed while attempting to perform a message queue read.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1091	ERROR: Recovery cannot retrieve record for domain domain_name
	Description	The Domains gateway was reading its transaction log upon startup and identified the transaction mentioned in this userlog record as potentially requiring recovery actions. The transaction log stated that domain domain_name was a participant in this transaction, but information about this domain could not be found in shared memory. This message can occur in a development environment if the BEA TUXEDO system Administrator loads a Domains configuration file for a new application in place of an old configuration file, the new and old configuration files share the same `DMTLOGDEV` and `DMTLOGNAME` parameters, the new configuration file specifies a different set of domains from the old file, and the old application was last shut down either when transactions were outstanding or other than by using `tmshutdown`(1).
Action	If the BEA TUXEDO system Administrator has recently loaded a new Domains configuration file as described above, then the BEA TUXEDO system Administrator may either reload the old configuration file, reboot the old application, and shut down the old application (if transactional integrity of the old application is important), or may use the `dmadmin`(1) subcommand `dsdmlog` to remove the old log (if in a development environment where the old application is being thrown away). Note that an application may not specify the same `DMTLOGDEV` and `DMTLOGNAME` combination as used for any other application. If this is the case, one of the applications should be changed to use a different `DMTLOGNAME` or `DMTLOGDEV`. If this error is not the result of one of the conditions described above, contact your BEA TUXEDO system Technical Support.
See Also	`dmloadcf`(1), `dmconfig`(5)
1092	ERROR: Recovery cannot retrieve record for domain domain_name
	Description	The Domains gateway was reading its transaction log upon startup and identified the transaction mentioned in this userlog record as potentially requiring recovery actions. The transaction log stated that domain domain_name was a participant in this transaction, but information about this domain could not be found in shared memory. This message can occur in a development environment if the BEA TUXEDO system Administrator loads a Domains configuration file for a new application in place of an old configuration file, the new and old configuration files share the same `DMTLOGDEV` and `DMTLOGNAME` parameters, the new configuration file specifies a different set of domains from the old file, and the old application was last shut down either when transactions were outstanding or other than by using `tmshutdown`(1).
Action	If the BEA TUXEDO system Administrator has recently loaded a new Domains configuration file as described above, then the BEA TUXEDO system Administrator may either reload the old configuration file, reboot the old application, and shut down the old application (if transactional integrity of the old application is important), or may use the `dmadmin`(1) subcommand `dsdmlog` to remove the old log (if in a development environment where the old application is being thrown away). Note that an application may not specify the same `DMTLOGDEV` and `DMTLOGNAME` combination as used for any other application. If this is the case, one of the applications should be changed to use a different `DMTLOGNAME` or `DMTLOGDEV`. If this error is not the result of one of the conditions described above, contact your BEA TUXEDO system Technical Support.
See Also	`dmloadcf`(1), `dmconfig`(5)
1093	ERROR: Recovery cannot set branch state for domain domain_name
	Description	The Domains gateway was recovering a transaction from its log and was able to restore the transaction to shared memory, but then was unable to set the transaction state in shared memory.
Action	Contact your BEA TUXEDO system Technical Support.
1094	ERROR: DMCONFIG DMTLOGSIZE, num_pages, differs from size of existing log, num_pages
	Description	The Domains gateway was opening its transaction log to perform recovery and found that the size of the log as listed in the dmconfig file did not match the actual size of the log.
Action	If there could still be any outstanding transactions requiring recovery, restore the Domains configuration to its previous size and reload it using `dmloadcf`(1). The Domains gateway group may then be rebooted. If the BEA TUXEDO system administrator does need to change the size of the Domains log, the `dmadmin`(1) subcommand `dsdmlog` may be used. The log will then automatically be re-created with the size listed in the Domains configuration file the next time the Domains gateway group is booted.
See Also	`dmadmin`(1), `dmloadcf`(1), `dmconfig`(5)
1095	WARN: Cannot initialize network recovery and/or listening points
	Description	While booting, a Domains gateway process was unable to complete network initialization operations.
Action	The specific actions taken upon network startup are dependent upon the network instantiation. Make sure that the network parameters specified in the Domains configuration file are valid. In many cases, the network instantiation will print a preceding userlog message giving more information as to the cause of the problem.
1096	ERROR: Memory allocation failure for post receive
	Description	An attempt to dynamically allocate memory from the operating system using `malloc` failed while the Domains gateway was attempting to process a message received from another process in the same domain. The message will be dropped.
Action	Make sure the operating system parameters are set correctly for the amount of memory on the machine and the amount of memory that can be used by a process. Reduce the memory usage on the machine or increase the amount of physical memory on the machine.
1097	ERROR: Post receive operation on message failed
	Description	The Domains gateway was unable to perform buffer-type specific postprocessing on a message received from another process in the same domain.
Action	If using an application-defined buffer type, make sure that the buffer typeswitch routines conform to the specifications described on the `buffer`(3c) manual page. If using only the buffer types provided with the BEA TUXEDO product, contact your BEA TUXEDO system Technical Support.
See Also	`buffer`(3c)
1098	ERROR: [Service receive: cannot send meta-msg reply]
	Description	While attempting to advertise a service, the Domains gateway was unable to send a reply message to the process which requested that the service be advertised.
Action	Look in the userlog for a preceding message explaining why the reply message could not be sent (for example, an operating system resource error). If no such message is present, contact your BEA TUXEDO system Technical Support.
1099	ERROR: Unable to advertise initial services - error_string
	Description	When booting, the Domains gateway was unable to advertise its initial services. A string indicating the value of tperrno will be printed as part of the message. The gateway will exit as a result of this error.
Action	The proper action to take will depend upon the value of tperrno. If tperrno is set to `TPELIMIT`, increase the value of the `MAXSERVICES` parameter in the RESOURCES section of the `TUXCONFIG` file. If tperrno is set to `TPESYSTEM`, look for another message preceding this message with more information on the failure.
See Also	`ubbconfig`(5)

[Top] [Prev] [Next] [Bottom]