JTAMBean


Overview  |   Related MBeans  |   Attributes  |   Operations

Overview

This interface provides access to the JTA configuration attributes. The methods defined herein are applicable for JTA configuration at the domain level.

   
Fully Qualified Interface NameIf you use the getMBeanInfo operation in MBeanTypeServiceMBean, supply the following value as this MBean's fully qualified interface name:
weblogic.management.configuration.JTAMBean
Factory Methods No factory methods. Instances of this MBean are created automatically.
Access Points You can access this MBean from the following MBean attributes:


    Attributes

    This section describes the following attributes:


    AbandonTimeoutSeconds

    Specifies the maximum amount of time, in seconds, a transaction manager persists in attempting to complete the second phase of a two-phase commit transaction.

    During the second phase of a two-phase commit transaction, the transaction manager continues to try to complete the transaction until all resource managers indicate that the transaction is completed. After the abandon transaction timer expires, no further attempt is made to resolve the transaction. If the transaction is in a prepared state before being abandoned, the transaction manager rolls back the transaction to release any locks held on behalf of the abandoned transaction.

           
    Privileges Read/Write
    Typeint
    Default Value86400
    Minimum value1
    Maximum value2147483647

    BeforeCompletionIterationLimit

    The maximum number of cycles that the transaction manager performs the beforeCompletion synchronization callback for this WebLogic Server domain.

    Nothing prevents a Synchronization object from registering another during beforeCompletion, even those whose beforeCompletions have already been called. For example, an EJB can call another in its ejbStore() method. To accommodate this, the transaction manager calls all Synchronization objects, then repeats the cycle if new ones have been registered. This count sets a limit to the number of cycles that synchronization occurs.

           
    Privileges Read/Write
    Typeint
    Default Value10
    Minimum value1
    Maximum value2147483647

    CachingDisabled

    Private property that disables caching in proxies.

           
    Privileges Read only
    Typeboolean
    Redeploy or Restart required Changes take effect after you redeploy the module or restart the server.

    CheckpointIntervalSeconds

    The interval at which the transaction manager creates a new transaction log file and checks all old transaction log files to see if they are ready to be deleted.

           
    Privileges Read/Write
    Typeint
    Default Value300
    Minimum value10
    Maximum value1800

    CompletionTimeoutSeconds

    Specifies the maximum amount of time, in seconds, a transaction manager waits for all resource managers to respond and indicate if the transaction can be committed or rolled back.

           
    Privileges Read/Write
    Typeint
    Default Value0
    Minimum value-1
    Maximum value2147483647

    ForgetHeuristics

    Specifies whether the transaction manager automatically performs an XA Resource forget operation for heuristic transaction completions.

    When enabled, the transaction manager automatically performs an XA Resource forget() operation for all resources as soon as the transaction learns of a heuristic outcome. Disable this feature only if you know what to do with the resource when it reports a heuristic decision.

           
    Privileges Read/Write
    Typeboolean
    Default Valuetrue

    MaxResourceRequestsOnServer

    Maximum number of concurrent requests to resources allowed for each server.

           
    Privileges Read/Write
    Typeint
    Default Value50
    Minimum value10
    Maximum value2147483647

    MaxResourceUnavailableMillis

    Maximum duration time, in milliseconds, that a resource is declared dead. After the duration, the resource is declared available again, even if the resource provider does not explicitly re-register the resource.

           
    Privileges Read/Write
    Typelong
    Default Value1800000
    Minimum value0
    Maximum value9223372036854775807

    MaxTransactions

    The maximum number of simultaneous in-progress transactions allowed on a server in this WebLogic Server domain.

           
    Privileges Read/Write
    Typeint
    Default Value10000
    Minimum value1
    Maximum value2147483647

    MaxUniqueNameStatistics

    The maximum number of unique transaction names for which statistics are maintained.

    The first 1001 unique transaction names are maintained as their own transaction name and stored in each statistic. After the 1001st transaction name is reached, the transaction name is stored as weblogic.transaction.statistics.namedOverflow, and the transaction statistic is also merged and maintained in weblogic.transaction.statistics.namedOverflow.

    A transaction name typically represents a category of business transactions, such as "funds-transfer."

           
    Privileges Read/Write
    Typeint
    Default Value1000
    Minimum value0
    Maximum value2147483647

    MaxXACallMillis

    Maximum allowed time duration, in milliseconds, for XA calls to resources. If a particular XA call to a resource exceeds the limit, the resource is declared unavailable.

           
    Privileges Read/Write
    Typelong
    Default Value120000
    Minimum value0
    Maximum value9223372036854775807

    MBeanInfo

    Returns the MBean info for this MBean.

    Deprecated.

           
    Privileges Read only
    Typejavax.management.MBeanInfo
    Redeploy or Restart required Changes take effect after you redeploy the module or restart the server.

    Name

    The user-specified name of this MBean instance.

    This name is included as one of the key properties in the MBean's javax.management.ObjectName:
    Name=user-specified-name

           
    Privileges Read/Write
    Typejava.lang.String

    Notes

    Optional information that you can include to describe this configuration.

    WebLogic Server saves this note in the domain's configuration file (config.xml) as XML PCDATA. All left angle brackets (<) are converted to the XML entity &lt;. Carriage returns/line feeds are preserved.

    Note:

    If you create or edit a note from the Administration Console, the Administration Console does not preserve carriage returns/line feeds.

           
    Privileges Read/Write
    Typejava.lang.String

    ObjectName

    Returns the ObjectName under which this MBean is registered in the MBean server.

    Deprecated.

           
    Privileges Read only
    Typeweblogic.management.WebLogicObjectName
    Redeploy or Restart required Changes take effect after you redeploy the module or restart the server.

    ParallelXAEnabled

    Indicates that XA calls are executed in parallel if there are available threads.

           
    Privileges Read/Write
    Typeboolean
    Default Valuetrue

    Parent

    Return the immediate parent for this MBean

           
    Privileges Read/Write
    Type

    Registered

    Returns false if the MBean represented by this object has been unregistered.

    Deprecated.

           
    Privileges Read only
    Typeboolean
    Redeploy or Restart required Changes take effect after you redeploy the module or restart the server.

    SecurityInteropMode

    Specifies the security mode of the communication channel used for XA calls between servers that participate in a global transaction. All server instances in a domain must have the same security mode setting.

    Security Interoperability Mode options:



           
    Privileges Read/Write
    Typejava.lang.String
    Default Valuedefault
    Legal Values
    • default
    • performance
    • compatibility

    SerializeEnlistmentsGCIntervalMillis

    The time interval, in milliseconds, at which internal objects used to serialize resource enlistment are cleaned up.

           
    Privileges Read/Write
    Typelong
    Default Value30000
    Minimum value0

    TimeoutSeconds

    Specifies the maximum amount of time, in seconds, an active transaction is allowed to be in the first phase of a two-phase commit transaction. If the specified amount of time expires, the transaction is automatically rolled back.

           
    Privileges Read/Write
    Typeint
    Default Value30
    Minimum value1
    Maximum value2147483647

    TwoPhaseEnabled

    Indicates that the two-phase commit protocol is used to coordinate transactions across two or more resource managers.

    If not selected:



           
    Privileges Read/Write
    Typeboolean
    Default Valuetrue

    Type

    Returns the type of the MBean.

           
    Privileges Read only
    Typejava.lang.String
    Redeploy or Restart required Changes take effect after you redeploy the module or restart the server.

    UnregisterResourceGracePeriod

    The amount of time, in seconds, a transaction manager waits for transactions involving the resource to complete before unregistering a resource. This grace period helps minimize the risk of abandoned transactions because of an unregistered resource, such as a JDBC data source module packaged with an application.

    During the specified grace period, the unregisterResource call blocks until the call returns and no new transactions are started for the associated resource. If the number of outstanding transactions for the resource goes to 0, the unregisterResource call returns immediately.

    At the end of the grace period, if outstanding transactions are associated with the resource, the unregisterResource call returns and a log message is written to the server on which the resource was previously registered.

           
    Privileges Read/Write
    Typeint
    Default Value30
    Minimum value0
    Maximum value2147483647

    WSATIssuedTokenEnabled

    Specifies whether to use issuedtoken to enable authentication between the WS-AT coordinator and participant.

           
    Privileges Read/Write
    Typeboolean

    WSATTransportSecurityMode

    Specifies transport security mode required by WebService Transaction endpoints.

    Transport Security options:



           
    Privileges Read/Write
    Typejava.lang.String
    Default ValueSSLNotRequired
    Legal Values
    • SSLNotRequired
    • SSLRequired
    • ClientCertRequired


    Operations

    This section describes the following operations:


    freezeCurrentValue

    If the specified attribute has not been set explicitly, and if the attribute has a default value, this operation forces the MBean to persist the default value.

    Unless you use this operation, the default value is not saved and is subject to change if you update to a newer release of WebLogic Server. Invoking this operation isolates this MBean from the effects of such changes.

    Note:

    To insure that you are freezing the default value, invoke the restoreDefaultValue operation before you invoke this.

    This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute for which some other value has been set.

    Deprecated. 9.0.0.0

       
    Operation Name"freezeCurrentValue"
    ParametersObject [] {  attributeName }

    where:

    • attributeName is an object of type java.lang.String that specifies:

      attributeName

    SignatureString [] { "java.lang.String" }
    Returns void
    Exceptions
    • javax.management.AttributeNotFoundException
    • javax.management.MBeanException

    isSet

    Returns true if the specified attribute has been set explicitly in this MBean instance.

       
    Operation Name"isSet"
    ParametersObject [] {  propertyName }

    where:

    • propertyName is an object of type java.lang.String that specifies:

      property to check

    SignatureString [] { "java.lang.String" }
    Returns boolean

    restoreDefaultValue

    If the specified attribute has a default value, this operation removes any value that has been set explicitly and causes the attribute to use the default value.

    Default values are subject to change if you update to a newer release of WebLogic Server. To prevent the value from changing if you update to a newer release, invoke the freezeCurrentValue operation.

    This operation has no effect if you invoke it on an attribute that does not provide a default value or on an attribute that is already using the default.

    Deprecated. 9.0.0.0

       
    Operation Name"restoreDefaultValue"
    ParametersObject [] {  attributeName }

    where:

    • attributeName is an object of type java.lang.String that specifies:

      attributeName

    SignatureString [] { "java.lang.String" }
    Returns void
    Exceptions
    • javax.management.AttributeNotFoundException

    unSet

    Restore the given property to its default value.

       
    Operation Name"unSet"
    ParametersObject [] {  propertyName }

    where:

    • propertyName is an object of type java.lang.String that specifies:

      property to restore

    SignatureString [] { "java.lang.String" }
    Returns void